netdev - Re: [PATCH net-next] net: mdio-mux: add bus name to bus id

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <YiTQnjjtlJfrHH/a@lunn.ch>
Date:   Sun, 6 Mar 2022 16:17:50 +0100
From:   Andrew Lunn <andrew@...n.ch>
To:     Heiner Kallweit <hkallweit1@...il.com>
Cc:     Russell King - ARM Linux <linux@...linux.org.uk>,
        Jakub Kicinski <kuba@...nel.org>,
        David Miller <davem@...emloft.net>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: Re: [PATCH net-next] net: mdio-mux: add bus name to bus id

On Sun, Mar 06, 2022 at 03:22:34PM +0100, Heiner Kallweit wrote:
> In case of DT-configured systems it may be hard to identify the PHY
> interrupt in the /proc/interrupts output. Therefore add the name to
> the id to make clearer that it's about a device on a muxed mdio bus.
> In my case:
> 
> Now: mdio_mux-0.e40908ff:08
> Before: 0.e40908ff:08
> 
> Signed-off-by: Heiner Kallweit <hkallweit1@...il.com>

Reviewed-by: Andrew Lunn <andrew@...n.ch>

    Andrew