| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1646748651-16811-1-git-send-email-min.li.xe@renesas.com>
Date: Tue, 8 Mar 2022 09:10:51 -0500
From: Min Li <min.li.xe@...esas.com>
To: richardcochran@...il.com, lee.jones@...aro.org
Cc: linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
Min Li <min.li.xe@...esas.com>
Subject: [PATCH net] ptp: idt82p33: use rsmu driver to access i2c/spi bus
rsmu (Renesas Synchronization Management Unit ) driver is located in
drivers/mfd and responsible for creating multiple devices including
idt82p33 phc, which will then use the exposed regmap and mutex
handle to access i2c/spi bus.
Signed-off-by: Min Li <min.li.xe@...esas.com>
---
drivers/ptp/ptp_idt82p33.c | 344 ++++++++++-----------------------------
drivers/ptp/ptp_idt82p33.h | 151 +++++------------
include/linux/mfd/idt82p33_reg.h | 3 +
3 files changed, 129 insertions(+), 369 deletions(-)
diff --git a/drivers/ptp/ptp_idt82p33.c b/drivers/ptp/ptp_idt82p33.c
index c1c959f..97c1be4 100644
--- a/drivers/ptp/ptp_idt82p33.c
+++ b/drivers/ptp/ptp_idt82p33.c
@@ -6,13 +6,17 @@
#define pr_fmt(fmt) "IDT_82p33xxx: " fmt
#include <linux/firmware.h>
-#include <linux/i2c.h>
+#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/ptp_clock_kernel.h>
#include <linux/delay.h>
+#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/timekeeping.h>
#include <linux/bitops.h>
+#include <linux/of.h>
+#include <linux/mfd/rsmu.h>
+#include <linux/mfd/idt82p33_reg.h>
#include "ptp_private.h"
#include "ptp_idt82p33.h"
@@ -24,15 +28,25 @@ MODULE_LICENSE("GPL");
MODULE_FIRMWARE(FW_FILENAME);
/* Module Parameters */
-static u32 sync_tod_timeout = SYNC_TOD_TIMEOUT_SEC;
-module_param(sync_tod_timeout, uint, 0);
-MODULE_PARM_DESC(sync_tod_timeout,
-"duration in second to keep SYNC_TOD on (set to 0 to keep it always on)");
-
static u32 phase_snap_threshold = SNAP_THRESHOLD_NS;
module_param(phase_snap_threshold, uint, 0);
MODULE_PARM_DESC(phase_snap_threshold,
-"threshold (150000ns by default) below which adjtime would ignore");
+"threshold (10000ns by default) below which adjtime would use double dco");
+
+static char *firmware;
+module_param(firmware, charp, 0);
+
+static inline int idt82p33_read(struct idt82p33 *idt82p33, u16 regaddr,
+ u8 *buf, u16 count)
+{
+ return regmap_bulk_read(idt82p33->regmap, regaddr, buf, count);
+}
+
+static inline int idt82p33_write(struct idt82p33 *idt82p33, u16 regaddr,
+ u8 *buf, u16 count)
+{
+ return regmap_bulk_write(idt82p33->regmap, regaddr, buf, count);
+}
static void idt82p33_byte_array_to_timespec(struct timespec64 *ts,
u8 buf[TOD_BYTE_COUNT])
@@ -78,110 +92,6 @@ static void idt82p33_timespec_to_byte_array(struct timespec64 const *ts,
}
}
-static int idt82p33_xfer_read(struct idt82p33 *idt82p33,
- unsigned char regaddr,
- unsigned char *buf,
- unsigned int count)
-{
- struct i2c_client *client = idt82p33->client;
- struct i2c_msg msg[2];
- int cnt;
-
- msg[0].addr = client->addr;
- msg[0].flags = 0;
- msg[0].len = 1;
- msg[0].buf = ®addr;
-
- msg[1].addr = client->addr;
- msg[1].flags = I2C_M_RD;
- msg[1].len = count;
- msg[1].buf = buf;
-
- cnt = i2c_transfer(client->adapter, msg, 2);
- if (cnt < 0) {
- dev_err(&client->dev, "i2c_transfer returned %d\n", cnt);
- return cnt;
- } else if (cnt != 2) {
- dev_err(&client->dev,
- "i2c_transfer sent only %d of %d messages\n", cnt, 2);
- return -EIO;
- }
- return 0;
-}
-
-static int idt82p33_xfer_write(struct idt82p33 *idt82p33,
- u8 regaddr,
- u8 *buf,
- u16 count)
-{
- struct i2c_client *client = idt82p33->client;
- /* we add 1 byte for device register */
- u8 msg[IDT82P33_MAX_WRITE_COUNT + 1];
- int err;
-
- if (count > IDT82P33_MAX_WRITE_COUNT)
- return -EINVAL;
-
- msg[0] = regaddr;
- memcpy(&msg[1], buf, count);
-
- err = i2c_master_send(client, msg, count + 1);
- if (err < 0) {
- dev_err(&client->dev, "i2c_master_send returned %d\n", err);
- return err;
- }
-
- return 0;
-}
-
-static int idt82p33_page_offset(struct idt82p33 *idt82p33, unsigned char val)
-{
- int err;
-
- if (idt82p33->page_offset == val)
- return 0;
-
- err = idt82p33_xfer_write(idt82p33, PAGE_ADDR, &val, sizeof(val));
- if (err)
- dev_err(&idt82p33->client->dev,
- "failed to set page offset %d\n", val);
- else
- idt82p33->page_offset = val;
-
- return err;
-}
-
-static int idt82p33_rdwr(struct idt82p33 *idt82p33, unsigned int regaddr,
- unsigned char *buf, unsigned int count, bool write)
-{
- u8 offset, page;
- int err;
-
- page = _PAGE(regaddr);
- offset = _OFFSET(regaddr);
-
- err = idt82p33_page_offset(idt82p33, page);
- if (err)
- return err;
-
- if (write)
- return idt82p33_xfer_write(idt82p33, offset, buf, count);
-
- return idt82p33_xfer_read(idt82p33, offset, buf, count);
-}
-
-static int idt82p33_read(struct idt82p33 *idt82p33, unsigned int regaddr,
- unsigned char *buf, unsigned int count)
-{
- return idt82p33_rdwr(idt82p33, regaddr, buf, count, false);
-}
-
-static int idt82p33_write(struct idt82p33 *idt82p33, unsigned int regaddr,
- unsigned char *buf, unsigned int count)
-{
- return idt82p33_rdwr(idt82p33, regaddr, buf, count, true);
-}
-
static int idt82p33_dpll_set_mode(struct idt82p33_channel *channel,
enum pll_mode mode)
{
@@ -206,7 +116,7 @@ static int idt82p33_dpll_set_mode(struct idt82p33_channel *channel,
if (err)
return err;
- channel->pll_mode = dpll_mode;
+ channel->pll_mode = mode;
return 0;
}
@@ -467,7 +377,7 @@ static int idt82p33_measure_tod_write_overhead(struct idt82p33_channel *channel)
err = idt82p33_measure_settime_gettime_gap_overhead(channel, &gap_ns);
if (err) {
- dev_err(&idt82p33->client->dev,
+ dev_err(idt82p33->dev,
"Failed in %s with err %d!\n", __func__, err);
return err;
}
@@ -499,8 +409,8 @@ static int idt82p33_check_and_set_masks(struct idt82p33 *idt82p33,
if (page == PLLMASK_ADDR_HI && offset == PLLMASK_ADDR_LO) {
if ((val & 0xfc) || !(val & 0x3)) {
- dev_err(&idt82p33->client->dev,
- "Invalid PLL mask 0x%hhx\n", val);
+ dev_err(idt82p33->dev,
+ "Invalid PLL mask 0x%x\n", val);
err = -EINVAL;
} else {
idt82p33->pll_mask = val;
@@ -520,14 +430,14 @@ static void idt82p33_display_masks(struct idt82p33 *idt82p33)
{
u8 mask, i;
- dev_info(&idt82p33->client->dev,
+ dev_info(idt82p33->dev,
"pllmask = 0x%02x\n", idt82p33->pll_mask);
for (i = 0; i < MAX_PHC_PLL; i++) {
mask = 1 << i;
if (mask & idt82p33->pll_mask)
- dev_info(&idt82p33->client->dev,
+ dev_info(idt82p33->dev,
"PLL%d output_mask = 0x%04x\n",
i, idt82p33->channel[i].output_mask);
}
@@ -539,11 +449,6 @@ static int idt82p33_sync_tod(struct idt82p33_channel *channel, bool enable)
u8 sync_cnfg;
int err;
- /* Turn it off after sync_tod_timeout seconds */
- if (enable && sync_tod_timeout)
- ptp_schedule_worker(channel->ptp_clock,
- sync_tod_timeout * HZ);
-
err = idt82p33_read(idt82p33, channel->dpll_sync_cnfg,
&sync_cnfg, sizeof(sync_cnfg));
if (err)
@@ -557,22 +462,6 @@ static int idt82p33_sync_tod(struct idt82p33_channel *channel, bool enable)
&sync_cnfg, sizeof(sync_cnfg));
}
-static long idt82p33_sync_tod_work_handler(struct ptp_clock_info *ptp)
-{
- struct idt82p33_channel *channel =
- container_of(ptp, struct idt82p33_channel, caps);
- struct idt82p33 *idt82p33 = channel->idt82p33;
-
- mutex_lock(&idt82p33->reg_lock);
-
- (void)idt82p33_sync_tod(channel, false);
-
- mutex_unlock(&idt82p33->reg_lock);
-
- /* Return a negative value here to not reschedule */
- return -1;
-}
-
static int idt82p33_output_enable(struct idt82p33_channel *channel,
bool enable, unsigned int outn)
{
@@ -634,18 +523,11 @@ static int idt82p33_enable_tod(struct idt82p33_channel *channel)
struct idt82p33 *idt82p33 = channel->idt82p33;
struct timespec64 ts = {0, 0};
int err;
- u8 val;
-
- val = 0;
- err = idt82p33_write(idt82p33, channel->dpll_input_mode_cnfg,
- &val, sizeof(val));
- if (err)
- return err;
err = idt82p33_measure_tod_write_overhead(channel);
if (err) {
- dev_err(&idt82p33->client->dev,
+ dev_err(idt82p33->dev,
"Failed in %s with err %d!\n", __func__, err);
return err;
}
@@ -673,16 +555,14 @@ static void idt82p33_ptp_clock_unregister_all(struct idt82p33 *idt82p33)
}
static int idt82p33_enable(struct ptp_clock_info *ptp,
- struct ptp_clock_request *rq, int on)
+ struct ptp_clock_request *rq, int on)
{
struct idt82p33_channel *channel =
container_of(ptp, struct idt82p33_channel, caps);
struct idt82p33 *idt82p33 = channel->idt82p33;
- int err;
-
- err = -EOPNOTSUPP;
+ int err = -EOPNOTSUPP;
- mutex_lock(&idt82p33->reg_lock);
+ mutex_lock(idt82p33->lock);
if (rq->type == PTP_CLK_REQ_PEROUT) {
if (!on)
@@ -690,15 +570,18 @@ static int idt82p33_enable(struct ptp_clock_info *ptp,
&rq->perout);
/* Only accept a 1-PPS aligned to the second. */
else if (rq->perout.start.nsec || rq->perout.period.sec != 1 ||
- rq->perout.period.nsec) {
+ rq->perout.period.nsec)
err = -ERANGE;
- } else
+ else
err = idt82p33_perout_enable(channel, true,
&rq->perout);
}
- mutex_unlock(&idt82p33->reg_lock);
+ mutex_unlock(idt82p33->lock);
+ if (err)
+ dev_err(idt82p33->dev,
+ "Failed in %s with err %d!\n", __func__, err);
return err;
}
@@ -727,11 +610,11 @@ static int idt82p33_adjwritephase(struct ptp_clock_info *ptp, s32 offset_ns)
val[3] = (offset_regval >> 24) & 0x1F;
val[3] |= PH_OFFSET_EN;
- mutex_lock(&idt82p33->reg_lock);
+ mutex_lock(idt82p33->lock);
err = idt82p33_dpll_set_mode(channel, PLL_MODE_WPH);
if (err) {
- dev_err(&idt82p33->client->dev,
+ dev_err(idt82p33->dev,
"Failed in %s with err %d!\n", __func__, err);
goto out;
}
@@ -740,7 +623,7 @@ static int idt82p33_adjwritephase(struct ptp_clock_info *ptp, s32 offset_ns)
sizeof(val));
out:
- mutex_unlock(&idt82p33->reg_lock);
+ mutex_unlock(idt82p33->lock);
return err;
}
@@ -751,12 +634,12 @@ static int idt82p33_adjfine(struct ptp_clock_info *ptp, long scaled_ppm)
struct idt82p33 *idt82p33 = channel->idt82p33;
int err;
- mutex_lock(&idt82p33->reg_lock);
+ mutex_lock(idt82p33->lock);
err = _idt82p33_adjfine(channel, scaled_ppm);
+ mutex_unlock(idt82p33->lock);
if (err)
- dev_err(&idt82p33->client->dev,
+ dev_err(idt82p33->dev,
"Failed in %s with err %d!\n", __func__, err);
- mutex_unlock(&idt82p33->reg_lock);
return err;
}
@@ -768,29 +651,20 @@ static int idt82p33_adjtime(struct ptp_clock_info *ptp, s64 delta_ns)
struct idt82p33 *idt82p33 = channel->idt82p33;
int err;
- mutex_lock(&idt82p33->reg_lock);
+ mutex_lock(idt82p33->lock);
if (abs(delta_ns) < phase_snap_threshold) {
- mutex_unlock(&idt82p33->reg_lock);
+ mutex_unlock(idt82p33->lock);
return 0;
}
err = _idt82p33_adjtime(channel, delta_ns);
- if (err) {
- mutex_unlock(&idt82p33->reg_lock);
- dev_err(&idt82p33->client->dev,
- "Adjtime failed in %s with err %d!\n", __func__, err);
- return err;
- }
+ mutex_unlock(idt82p33->lock);
- err = idt82p33_sync_tod(channel, true);
if (err)
- dev_err(&idt82p33->client->dev,
- "Sync_tod failed in %s with err %d!\n", __func__, err);
-
- mutex_unlock(&idt82p33->reg_lock);
-
+ dev_err(idt82p33->dev,
+ "Failed in %s with err %d!\n", __func__, err);
return err;
}
@@ -801,31 +675,31 @@ static int idt82p33_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
struct idt82p33 *idt82p33 = channel->idt82p33;
int err;
- mutex_lock(&idt82p33->reg_lock);
+ mutex_lock(idt82p33->lock);
err = _idt82p33_gettime(channel, ts);
+ mutex_unlock(idt82p33->lock);
+
if (err)
- dev_err(&idt82p33->client->dev,
+ dev_err(idt82p33->dev,
"Failed in %s with err %d!\n", __func__, err);
- mutex_unlock(&idt82p33->reg_lock);
-
return err;
}
static int idt82p33_settime(struct ptp_clock_info *ptp,
- const struct timespec64 *ts)
+ const struct timespec64 *ts)
{
struct idt82p33_channel *channel =
container_of(ptp, struct idt82p33_channel, caps);
struct idt82p33 *idt82p33 = channel->idt82p33;
int err;
- mutex_lock(&idt82p33->reg_lock);
+ mutex_lock(idt82p33->lock);
err = _idt82p33_settime(channel, ts);
+ mutex_unlock(idt82p33->lock);
+
if (err)
- dev_err(&idt82p33->client->dev,
+ dev_err(idt82p33->dev,
"Failed in %s with err %d!\n", __func__, err);
- mutex_unlock(&idt82p33->reg_lock);
-
return err;
}
@@ -864,7 +738,7 @@ static int idt82p33_channel_init(struct idt82p33_channel *channel, int index)
static void idt82p33_caps_init(struct ptp_clock_info *caps)
{
caps->owner = THIS_MODULE;
- caps->max_adj = 92000;
+ caps->max_adj = DCO_MAX_PPB;
caps->n_per_out = 11;
caps->adjphase = idt82p33_adjwritephase;
caps->adjfine = idt82p33_adjfine;
@@ -872,7 +746,6 @@ static void idt82p33_caps_init(struct ptp_clock_info *caps)
caps->gettime64 = idt82p33_gettime;
caps->settime64 = idt82p33_settime;
caps->enable = idt82p33_enable;
- caps->do_aux_work = idt82p33_sync_tod_work_handler;
}
static int idt82p33_enable_channel(struct idt82p33 *idt82p33, u32 index)
@@ -887,7 +760,7 @@ static int idt82p33_enable_channel(struct idt82p33 *idt82p33, u32 index)
err = idt82p33_channel_init(channel, index);
if (err) {
- dev_err(&idt82p33->client->dev,
+ dev_err(idt82p33->dev,
"Channel_init failed in %s with err %d!\n",
__func__, err);
return err;
@@ -912,7 +785,7 @@ static int idt82p33_enable_channel(struct idt82p33 *idt82p33, u32 index)
err = idt82p33_dpll_set_mode(channel, PLL_MODE_DCO);
if (err) {
- dev_err(&idt82p33->client->dev,
+ dev_err(idt82p33->dev,
"Dpll_set_mode failed in %s with err %d!\n",
__func__, err);
return err;
@@ -920,13 +793,13 @@ static int idt82p33_enable_channel(struct idt82p33 *idt82p33, u32 index)
err = idt82p33_enable_tod(channel);
if (err) {
- dev_err(&idt82p33->client->dev,
+ dev_err(idt82p33->dev,
"Enable_tod failed in %s with err %d!\n",
__func__, err);
return err;
}
- dev_info(&idt82p33->client->dev, "PLL%d registered as ptp%d\n",
+ dev_info(idt82p33->dev, "PLL%d registered as ptp%d\n",
index, channel->ptp_clock->index);
return 0;
@@ -940,25 +813,24 @@ static int idt82p33_load_firmware(struct idt82p33 *idt82p33)
int err;
s32 len;
- dev_dbg(&idt82p33->client->dev,
- "requesting firmware '%s'\n", FW_FILENAME);
+ dev_dbg(idt82p33->dev, "requesting firmware '%s'\n", FW_FILENAME);
- err = request_firmware(&fw, FW_FILENAME, &idt82p33->client->dev);
+ err = request_firmware(&fw, FW_FILENAME, idt82p33->dev);
if (err) {
- dev_err(&idt82p33->client->dev,
+ dev_err(idt82p33->dev,
"Failed in %s with err %d!\n", __func__, err);
return err;
}
- dev_dbg(&idt82p33->client->dev, "firmware size %zu bytes\n", fw->size);
+ dev_dbg(idt82p33->dev, "firmware size %zu bytes\n", fw->size);
rec = (struct idt82p33_fwrc *) fw->data;
for (len = fw->size; len > 0; len -= sizeof(*rec)) {
if (rec->reserved) {
- dev_err(&idt82p33->client->dev,
+ dev_err(idt82p33->dev,
"bad firmware, reserved field non-zero\n");
err = -EINVAL;
} else {
@@ -973,16 +845,11 @@ static int idt82p33_load_firmware(struct idt82p33 *idt82p33)
}
if (err == 0) {
- /* maximum 8 pages */
- if (page >= PAGE_NUM)
- continue;
-
/* Page size 128, last 4 bytes of page skipped */
- if (((loaddr > 0x7b) && (loaddr <= 0x7f))
- || loaddr > 0xfb)
+ if (loaddr > 0x7b)
continue;
- err = idt82p33_write(idt82p33, _ADDR(page, loaddr),
+ err = idt82p33_write(idt82p33, REG_ADDR(page, loaddr),
&val, sizeof(val));
}
@@ -997,36 +864,34 @@ static int idt82p33_load_firmware(struct idt82p33 *idt82p33)
}
-static int idt82p33_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int idt82p33_probe(struct platform_device *pdev)
{
+ struct rsmu_ddata *ddata = dev_get_drvdata(pdev->dev.parent);
struct idt82p33 *idt82p33;
int err;
u8 i;
- (void)id;
-
- idt82p33 = devm_kzalloc(&client->dev,
+ idt82p33 = devm_kzalloc(&pdev->dev,
sizeof(struct idt82p33), GFP_KERNEL);
if (!idt82p33)
return -ENOMEM;
- mutex_init(&idt82p33->reg_lock);
-
- idt82p33->client = client;
- idt82p33->page_offset = 0xff;
+ idt82p33->dev = &pdev->dev;
+ idt82p33->mfd = pdev->dev.parent;
+ idt82p33->lock = &ddata->lock;
+ idt82p33->regmap = ddata->regmap;
idt82p33->tod_write_overhead_ns = 0;
idt82p33->calculate_overhead_flag = 0;
idt82p33->pll_mask = DEFAULT_PLL_MASK;
idt82p33->channel[0].output_mask = DEFAULT_OUTPUT_MASK_PLL0;
idt82p33->channel[1].output_mask = DEFAULT_OUTPUT_MASK_PLL1;
- mutex_lock(&idt82p33->reg_lock);
+ mutex_lock(idt82p33->lock);
err = idt82p33_load_firmware(idt82p33);
if (err)
- dev_warn(&idt82p33->client->dev,
+ dev_warn(idt82p33->dev,
"loading firmware failed with %d\n", err);
if (idt82p33->pll_mask) {
@@ -1034,7 +899,7 @@ static int idt82p33_probe(struct i2c_client *client,
if (idt82p33->pll_mask & (1 << i)) {
err = idt82p33_enable_channel(idt82p33, i);
if (err) {
- dev_err(&idt82p33->client->dev,
+ dev_err(idt82p33->dev,
"Failed in %s with err %d!\n",
__func__, err);
break;
@@ -1042,69 +907,38 @@ static int idt82p33_probe(struct i2c_client *client,
}
}
} else {
- dev_err(&idt82p33->client->dev,
+ dev_err(idt82p33->dev,
"no PLLs flagged as PHCs, nothing to do\n");
err = -ENODEV;
}
- mutex_unlock(&idt82p33->reg_lock);
+ mutex_unlock(idt82p33->lock);
if (err) {
idt82p33_ptp_clock_unregister_all(idt82p33);
return err;
}
- i2c_set_clientdata(client, idt82p33);
+ platform_set_drvdata(pdev, idt82p33);
return 0;
}
-static int idt82p33_remove(struct i2c_client *client)
+static int idt82p33_remove(struct platform_device *pdev)
{
- struct idt82p33 *idt82p33 = i2c_get_clientdata(client);
+ struct idt82p33 *idt82p33 = platform_get_drvdata(pdev);
idt82p33_ptp_clock_unregister_all(idt82p33);
- mutex_destroy(&idt82p33->reg_lock);
return 0;
}
-#ifdef CONFIG_OF
-static const struct of_device_id idt82p33_dt_id[] = {
- { .compatible = "idt,82p33810" },
- { .compatible = "idt,82p33813" },
- { .compatible = "idt,82p33814" },
- { .compatible = "idt,82p33831" },
- { .compatible = "idt,82p33910" },
- { .compatible = "idt,82p33913" },
- { .compatible = "idt,82p33914" },
- { .compatible = "idt,82p33931" },
- {},
-};
-MODULE_DEVICE_TABLE(of, idt82p33_dt_id);
-#endif
-
-static const struct i2c_device_id idt82p33_i2c_id[] = {
- { "idt82p33810", },
- { "idt82p33813", },
- { "idt82p33814", },
- { "idt82p33831", },
- { "idt82p33910", },
- { "idt82p33913", },
- { "idt82p33914", },
- { "idt82p33931", },
- {},
-};
-MODULE_DEVICE_TABLE(i2c, idt82p33_i2c_id);
-
-static struct i2c_driver idt82p33_driver = {
+static struct platform_driver idt82p33_driver = {
.driver = {
- .of_match_table = of_match_ptr(idt82p33_dt_id),
- .name = "idt82p33",
+ .name = "82p33x1x-phc",
},
- .probe = idt82p33_probe,
- .remove = idt82p33_remove,
- .id_table = idt82p33_i2c_id,
+ .probe = idt82p33_probe,
+ .remove = idt82p33_remove,
};
-module_i2c_driver(idt82p33_driver);
+module_platform_driver(idt82p33_driver);
diff --git a/drivers/ptp/ptp_idt82p33.h b/drivers/ptp/ptp_idt82p33.h
index 1c7a0f0..0ea1c35 100644
--- a/drivers/ptp/ptp_idt82p33.h
+++ b/drivers/ptp/ptp_idt82p33.h
@@ -8,94 +8,19 @@
#define PTP_IDT82P33_H
#include <linux/ktime.h>
-#include <linux/workqueue.h>
+#include <linux/mfd/idt82p33_reg.h>
+#include <linux/regmap.h>
-
-/* Register Map - AN888_SMUforIEEE_SynchEther_82P33xxx_RevH.pdf */
-#define PAGE_NUM (8)
-#define _ADDR(page, offset) (((page) << 0x7) | ((offset) & 0x7f))
-#define _PAGE(addr) (((addr) >> 0x7) & 0x7)
-#define _OFFSET(addr) ((addr) & 0x7f)
-
-#define DPLL1_TOD_CNFG 0x134
-#define DPLL2_TOD_CNFG 0x1B4
-
-#define DPLL1_TOD_STS 0x10B
-#define DPLL2_TOD_STS 0x18B
-
-#define DPLL1_TOD_TRIGGER 0x115
-#define DPLL2_TOD_TRIGGER 0x195
-
-#define DPLL1_OPERATING_MODE_CNFG 0x120
-#define DPLL2_OPERATING_MODE_CNFG 0x1A0
-
-#define DPLL1_HOLDOVER_FREQ_CNFG 0x12C
-#define DPLL2_HOLDOVER_FREQ_CNFG 0x1AC
-
-#define DPLL1_PHASE_OFFSET_CNFG 0x143
-#define DPLL2_PHASE_OFFSET_CNFG 0x1C3
-
-#define DPLL1_SYNC_EDGE_CNFG 0X140
-#define DPLL2_SYNC_EDGE_CNFG 0X1C0
-
-#define DPLL1_INPUT_MODE_CNFG 0X116
-#define DPLL2_INPUT_MODE_CNFG 0X196
-
-#define OUT_MUX_CNFG(outn) _ADDR(0x6, (0xC * (outn)))
-
-#define PAGE_ADDR 0x7F
-/* Register Map end */
-
-/* Register definitions - AN888_SMUforIEEE_SynchEther_82P33xxx_RevH.pdf*/
-#define TOD_TRIGGER(wr_trig, rd_trig) ((wr_trig & 0xf) << 4 | (rd_trig & 0xf))
-#define SYNC_TOD BIT(1)
-#define PH_OFFSET_EN BIT(7)
-#define SQUELCH_ENABLE BIT(5)
-
-/* Bit definitions for the DPLL_MODE register */
-#define PLL_MODE_SHIFT (0)
-#define PLL_MODE_MASK (0x1F)
-
-#define PEROUT_ENABLE_OUTPUT_MASK (0xdeadbeef)
-
-enum pll_mode {
- PLL_MODE_MIN = 0,
- PLL_MODE_AUTOMATIC = PLL_MODE_MIN,
- PLL_MODE_FORCE_FREERUN = 1,
- PLL_MODE_FORCE_HOLDOVER = 2,
- PLL_MODE_FORCE_LOCKED = 4,
- PLL_MODE_FORCE_PRE_LOCKED2 = 5,
- PLL_MODE_FORCE_PRE_LOCKED = 6,
- PLL_MODE_FORCE_LOST_PHASE = 7,
- PLL_MODE_DCO = 10,
- PLL_MODE_WPH = 18,
- PLL_MODE_MAX = PLL_MODE_WPH,
-};
-
-enum hw_tod_trig_sel {
- HW_TOD_TRIG_SEL_MIN = 0,
- HW_TOD_TRIG_SEL_NO_WRITE = HW_TOD_TRIG_SEL_MIN,
- HW_TOD_TRIG_SEL_SYNC_SEL = 1,
- HW_TOD_TRIG_SEL_IN12 = 2,
- HW_TOD_TRIG_SEL_IN13 = 3,
- HW_TOD_TRIG_SEL_IN14 = 4,
- HW_TOD_TRIG_SEL_TOD_PPS = 5,
- HW_TOD_TRIG_SEL_TIMER_INTERVAL = 6,
- HW_TOD_TRIG_SEL_MSB_PHASE_OFFSET_CNFG = 7,
- HW_TOD_TRIG_SEL_MSB_HOLDOVER_FREQ_CNFG = 8,
- HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG = 9,
- HW_TOD_RD_TRIG_SEL_LSB_TOD_STS = HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG,
- WR_TRIG_SEL_MAX = HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG,
-};
-
-/* Register bit definitions end */
#define FW_FILENAME "idt82p33xxx.bin"
-#define MAX_PHC_PLL (2)
-#define TOD_BYTE_COUNT (10)
-#define MAX_MEASURMENT_COUNT (5)
-#define SNAP_THRESHOLD_NS (150000)
-#define SYNC_TOD_TIMEOUT_SEC (5)
-#define IDT82P33_MAX_WRITE_COUNT (512)
+#define MAX_PHC_PLL (2)
+#define TOD_BYTE_COUNT (10)
+#define DCO_MAX_PPB (92000)
+#define MAX_MEASURMENT_COUNT (5)
+#define SNAP_THRESHOLD_NS (10000)
+#define IMMEDIATE_SNAP_THRESHOLD_NS (50000)
+#define DDCO_THRESHOLD_NS (5)
+#define IDT82P33_MAX_WRITE_COUNT (512)
+#define PEROUT_ENABLE_OUTPUT_MASK (0xdeadbeef)
#define PLLMASK_ADDR_HI 0xFF
#define PLLMASK_ADDR_LO 0xA5
@@ -116,15 +41,25 @@ enum hw_tod_trig_sel {
#define DEFAULT_OUTPUT_MASK_PLL0 (0xc0)
#define DEFAULT_OUTPUT_MASK_PLL1 DEFAULT_OUTPUT_MASK_PLL0
+/**
+ * @brief Maximum absolute value for write phase offset in femtoseconds
+ */
+#define WRITE_PHASE_OFFSET_LIMIT (20000052084ll)
+
+/** @brief Phase offset resolution
+ *
+ * DPLL phase offset = 10^15 fs / ( System Clock * 2^13)
+ * = 10^15 fs / ( 1638400000 * 2^23)
+ * = 74.5058059692382 fs
+ */
+#define IDT_T0DPLL_PHASE_RESOL 74506
+
/* PTP Hardware Clock interface */
struct idt82p33_channel {
struct ptp_clock_info caps;
struct ptp_clock *ptp_clock;
- struct idt82p33 *idt82p33;
- enum pll_mode pll_mode;
- /* task to turn off SYNC_TOD bit after pps sync */
- struct delayed_work sync_tod_work;
- bool sync_tod_on;
+ struct idt82p33 *idt82p33;
+ enum pll_mode pll_mode;
s32 current_freq_ppb;
u8 output_mask;
u16 dpll_tod_cnfg;
@@ -138,15 +73,17 @@ struct idt82p33_channel {
};
struct idt82p33 {
- struct idt82p33_channel channel[MAX_PHC_PLL];
- struct i2c_client *client;
- u8 page_offset;
- u8 pll_mask;
- ktime_t start_time;
- int calculate_overhead_flag;
- s64 tod_write_overhead_ns;
- /* Protects I2C read/modify/write registers from concurrent access */
- struct mutex reg_lock;
+ struct idt82p33_channel channel[MAX_PHC_PLL];
+ struct device *dev;
+ u8 pll_mask;
+ /* Mutex to protect operations from being interrupted */
+ struct mutex *lock;
+ struct regmap *regmap;
+ struct device *mfd;
+ /* Overhead calculation for adjtime */
+ ktime_t start_time;
+ int calculate_overhead_flag;
+ s64 tod_write_overhead_ns;
};
/* firmware interface */
@@ -157,18 +94,4 @@ struct idt82p33_fwrc {
u8 reserved;
} __packed;
-/**
- * @brief Maximum absolute value for write phase offset in femtoseconds
- */
-#define WRITE_PHASE_OFFSET_LIMIT (20000052084ll)
-
-/** @brief Phase offset resolution
- *
- * DPLL phase offset = 10^15 fs / ( System Clock * 2^13)
- * = 10^15 fs / ( 1638400000 * 2^23)
- * = 74.5058059692382 fs
- */
-#define IDT_T0DPLL_PHASE_RESOL 74506
-
-
#endif /* PTP_IDT82P33_H */
diff --git a/include/linux/mfd/idt82p33_reg.h b/include/linux/mfd/idt82p33_reg.h
index 129a6c0..1db532f 100644
--- a/include/linux/mfd/idt82p33_reg.h
+++ b/include/linux/mfd/idt82p33_reg.h
@@ -7,6 +7,8 @@
#ifndef HAVE_IDT82P33_REG
#define HAVE_IDT82P33_REG
+#define REG_ADDR(page, offset) (((page) << 0x7) | ((offset) & 0x7f))
+
/* Register address */
#define DPLL1_TOD_CNFG 0x134
#define DPLL2_TOD_CNFG 0x1B4
@@ -41,6 +43,7 @@
#define REG_SOFT_RESET 0X381
#define OUT_MUX_CNFG(outn) REG_ADDR(0x6, (0xC * (outn)))
+#define TOD_TRIGGER(wr_trig, rd_trig) ((wr_trig & 0xf) << 4 | (rd_trig & 0xf))
/* Register bit definitions */
#define SYNC_TOD BIT(1)
--
2.7.4
Powered by blists - more mailing lists