netdev - [net-next 10/16] net/mlx5: DR, Align mlx5dv_dr API vport action with FW behavior

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220309213755.610202-11-saeed@kernel.org>
Date:   Wed,  9 Mar 2022 13:37:49 -0800
From:   Saeed Mahameed <saeed@...nel.org>
To:     "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>
Cc:     netdev@...r.kernel.org, Shun Hao <shunh@...dia.com>,
        Alex Vesker <valex@...dia.com>,
        Saeed Mahameed <saeedm@...dia.com>
Subject: [net-next 10/16] net/mlx5: DR, Align mlx5dv_dr API vport action with FW behavior

From: Shun Hao <shunh@...dia.com>

This aligns the behavior with FW when creating an FDB rule with wire
vport destination but no source port matching. Until now such rules
would fail on internal DR RX rule creation since the source and
destination are the wire vport.
The new behavior is the same as done on FW steering, if destination is
wire, we will create both TX and RX rules, but the RX packet coming from
wire will be dropped due to loopback not supported.

Signed-off-by: Shun Hao <shunh@...dia.com>
Reviewed-by: Alex Vesker <valex@...dia.com>
Signed-off-by: Saeed Mahameed <saeedm@...dia.com>
---
 .../ethernet/mellanox/mlx5/core/steering/dr_action.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c
index c61a5e83c78c..743422acc3d8 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c
@@ -669,15 +669,9 @@ int mlx5dr_actions_build_ste_arr(struct mlx5dr_matcher *matcher,
 		case DR_ACTION_TYP_VPORT:
 			attr.hit_gvmi = action->vport->caps->vhca_gvmi;
 			dest_action = action;
-			if (rx_rule) {
-				if (action->vport->caps->num == MLX5_VPORT_UPLINK) {
-					mlx5dr_dbg(dmn, "Device doesn't support Loopback on WIRE vport\n");
-					return -EOPNOTSUPP;
-				}
-				attr.final_icm_addr = action->vport->caps->icm_address_rx;
-			} else {
-				attr.final_icm_addr = action->vport->caps->icm_address_tx;
-			}
+			attr.final_icm_addr = rx_rule ?
+				action->vport->caps->icm_address_rx :
+				action->vport->caps->icm_address_tx;
 			break;
 		case DR_ACTION_TYP_POP_VLAN:
 			if (!rx_rule && !(dmn->ste_ctx->actions_caps &
-- 
2.35.1