| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 10 Mar 2022 12:19:12 -0800
From: Jonathan Lemon <jonathan.lemon@...il.com>
To: netdev@...r.kernel.org
Cc: kuba@...nel.org, davem@...emloft.net, richardcochran@...il.com,
kernel-team@...com
Subject: [PATCH net-next v2 10/10] docs: ABI: Document new timecard sysfs nodes.
Add sysfs nodes for the frequency generator and signal counters.
Update SMA selector lists for these, and also add the new
'None', 'VCC' 'GND' selectors.
Signed-off-by: Jonathan Lemon <jonathan.lemon@...il.com>
---
Documentation/ABI/testing/sysfs-timecard | 94 +++++++++++++++++++++++-
1 file changed, 93 insertions(+), 1 deletion(-)
diff --git a/Documentation/ABI/testing/sysfs-timecard b/Documentation/ABI/testing/sysfs-timecard
index 5bf78486a469..220478156297 100644
--- a/Documentation/ABI/testing/sysfs-timecard
+++ b/Documentation/ABI/testing/sysfs-timecard
@@ -37,8 +37,15 @@ Description: (RO) Set of available destinations (sinks) for a SMA
PPS2 signal is sent to the PPS2 selector
TS1 signal is sent to timestamper 1
TS2 signal is sent to timestamper 2
+ TS3 signal is sent to timestamper 3
+ TS4 signal is sent to timestamper 4
IRIG signal is sent to the IRIG-B module
DCF signal is sent to the DCF module
+ FREQ1 signal is sent to frequency counter 1
+ FREQ2 signal is sent to frequency counter 2
+ FREQ3 signal is sent to frequency counter 3
+ FREQ4 signal is sent to frequency counter 4
+ None signal input is disabled
===== ================================================
What: /sys/class/timecard/ocpN/available_sma_outputs
@@ -50,10 +57,16 @@ Description: (RO) Set of available sources for a SMA output signal.
10Mhz output is from the 10Mhz reference clock
PHC output PPS is from the PHC clock
MAC output PPS is from the Miniature Atomic Clock
- GNSS output PPS is from the GNSS module
+ GNSS1 output PPS is from the first GNSS module
GNSS2 output PPS is from the second GNSS module
IRIG output is from the PHC, in IRIG-B format
DCF output is from the PHC, in DCF format
+ GEN1 output is from frequency generator 1
+ GEN2 output is from frequency generator 2
+ GEN3 output is from frequency generator 3
+ GEN4 output is from frequency generator 4
+ GND output is GND
+ VCC output is VCC
===== ================================================
What: /sys/class/timecard/ocpN/clock_source
@@ -75,6 +88,85 @@ Contact: Jonathan Lemon <jonathan.lemon@...il.com>
Description: (RO) Contains the current offset value used by the firmware
for internal disciplining of the atomic clock.
+What: /sys/class/timecard/ocpN/freqX
+Date: March 2022
+Contact: Jonathan Lemon <jonathan.lemon@...il.com>
+Description: (RO) Optional directory containing the sysfs nodes for
+ frequency counter <X>.
+
+What: /sys/class/timecard/ocpN/freqX/frequency
+Date: March 2022
+Contact: Jonathan Lemon <jonathan.lemon@...il.com>
+Description: (RO) Contains the measured frequency over the specified
+ measurement period.
+
+What: /sys/class/timecard/ocpN/freqX/seconds
+Date: March 2022
+Contact: Jonathan Lemon <jonathan.lemon@...il.com>
+Description: (RW) Specifies the number of seconds from 0-255 that the
+ frequency should be measured over. Write 0 to disable.
+
+What: /sys/class/timecard/ocpN/genX
+Date: March 2022
+Contact: Jonathan Lemon <jonathan.lemon@...il.com>
+Description: (RO) Optional directory containing the sysfs nodes for
+ frequency generator <X>.
+
+What: /sys/class/timecard/ocpN/genX/duty
+Date: March 2022
+Contact: Jonathan Lemon <jonathan.lemon@...il.com>
+Description: (RO) Specifies the signal duty cycle as a percentage from 1-99.
+
+What: /sys/class/timecard/ocpN/genX/period
+Date: March 2022
+Contact: Jonathan Lemon <jonathan.lemon@...il.com>
+Description: (RO) Specifies the signal period in nanoseconds.
+
+What: /sys/class/timecard/ocpN/genX/phase
+Date: March 2022
+Contact: Jonathan Lemon <jonathan.lemon@...il.com>
+Description: (RO) Specifies the signal phase offset in nanoseconds.
+
+What: /sys/class/timecard/ocpN/genX/polarity
+Date: March 2022
+Contact: Jonathan Lemon <jonathan.lemon@...il.com>
+Description: (RO) Specifies the signal polarity, either 1 or 0.
+
+What: /sys/class/timecard/ocpN/genX/running
+Date: March 2022
+Contact: Jonathan Lemon <jonathan.lemon@...il.com>
+Description: (RO) Either 0 or 1, showing if the signal generator is running.
+
+What: /sys/class/timecard/ocpN/genX/start
+Date: March 2022
+Contact: Jonathan Lemon <jonathan.lemon@...il.com>
+Description: (RO) Shows the time in <sec>.<nsec> that the signal generator
+ started running.
+
+What: /sys/class/timecard/ocpN/genX/signal
+Date: March 2022
+Contact: Jonathan Lemon <jonathan.lemon@...il.com>
+Description: (RW) Used to start the signal generator, and summarize
+ the current status.
+
+ The signal generator may be started by writing the signal
+ period, followed by the optional signal values. If the
+ optional values are not provided, they default to the current
+ settings, which may be obtained from the other sysfs nodes.
+
+ period [duty [phase [polarity]]]
+
+ echo 500000000 > signal # 1/2 second period
+ echo 1000000 40 100 > signal
+ echo 0 > signal # turn off generator
+
+ Period and phase are specified in nanoseconds. Duty cycle is
+ a percentage from 1-99. Polarity is 1 or 0.
+
+ Reading this node will return:
+
+ period duty phase polarity start_time
+
What: /sys/class/timecard/ocpN/gnss_sync
Date: September 2021
Contact: Jonathan Lemon <jonathan.lemon@...il.com>
--
2.31.1
Powered by blists - more mailing lists