| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220311103414.8255-3-sunmingbao@tom.com>
Date: Fri, 11 Mar 2022 18:34:14 +0800
From: Mingbao Sun <sunmingbao@....com>
To: Keith Busch <kbusch@...nel.org>, Jens Axboe <axboe@...com>,
Christoph Hellwig <hch@....de>,
Sagi Grimberg <sagi@...mberg.me>,
Chaitanya Kulkarni <kch@...dia.com>,
linux-nvme@...ts.infradead.org, linux-kernel@...r.kernel.org,
Eric Dumazet <edumazet@...gle.com>,
"David S . Miller" <davem@...emloft.net>,
Hideaki YOSHIFUJI <yoshfuji@...ux-ipv6.org>,
David Ahern <dsahern@...nel.org>,
Jakub Kicinski <kuba@...nel.org>, netdev@...r.kernel.org
Cc: sunmingbao@....com, tyler.sun@...l.com, ping.gan@...l.com,
yanxiu.cai@...l.com, libin.zhang@...l.com, ao.sun@...l.com
Subject: [PATCH v2 3/3] nvmet-tcp: support specifying the congestion-control
From: Mingbao Sun <tyler.sun@...l.com>
congestion-control could have a noticeable impaction on the
performance of TCP-based communications. This is of course true
to NVMe_over_TCP.
Different congestion-controls (e.g., cubic, dctcp) are suitable for
different scenarios. Proper adoption of congestion control would benefit
the performance. On the contrary, the performance could be destroyed.
Though we can specify the congestion-control of NVMe_over_TCP via
writing '/proc/sys/net/ipv4/tcp_congestion_control', but this also
changes the congestion-control of all the future TCP sockets that
have not been explicitly assigned the congestion-control, thus bringing
potential impaction on their performance.
So it makes sense to make NVMe_over_TCP support specifying the
congestion-control. And this commit addresses the target side.
Implementation approach:
the following new file entry was created for user to specify the
congestion-control of each nvmet port.
'/sys/kernel/config/nvmet/ports/X/tcp_congestion'
Then later in nvmet_tcp_add_port, the specified congestion-control
would be applied to the listening socket of the nvmet port.
Signed-off-by: Mingbao Sun <tyler.sun@...l.com>
---
drivers/nvme/target/configfs.c | 42 ++++++++++++++++++++++++++++++++++
drivers/nvme/target/nvmet.h | 1 +
drivers/nvme/target/tcp.c | 13 +++++++++++
3 files changed, 56 insertions(+)
diff --git a/drivers/nvme/target/configfs.c b/drivers/nvme/target/configfs.c
index 091a0ca16361..7b7d95f6f582 100644
--- a/drivers/nvme/target/configfs.c
+++ b/drivers/nvme/target/configfs.c
@@ -11,6 +11,7 @@
#include <linux/ctype.h>
#include <linux/pci.h>
#include <linux/pci-p2pdma.h>
+#include <net/tcp.h>
#include "nvmet.h"
@@ -222,6 +223,45 @@ static ssize_t nvmet_addr_trsvcid_store(struct config_item *item,
CONFIGFS_ATTR(nvmet_, addr_trsvcid);
+static ssize_t nvmet_tcp_congestion_show(struct config_item *item,
+ char *page)
+{
+ struct nvmet_port *port = to_nvmet_port(item);
+
+ return snprintf(page, PAGE_SIZE, "%s\n",
+ port->tcp_congestion ? port->tcp_congestion : "");
+}
+
+static ssize_t nvmet_tcp_congestion_store(struct config_item *item,
+ const char *page, size_t count)
+{
+ struct nvmet_port *port = to_nvmet_port(item);
+ int len;
+ char *buf;
+
+ len = strcspn(page, "\n");
+ if (!len)
+ return -EINVAL;
+
+ if (nvmet_is_port_enabled(port, __func__))
+ return -EACCES;
+
+ buf = kmemdup_nul(page, len, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ if (strlen(buf) >= TCP_CA_NAME_MAX) {
+ kfree(buf);
+ return -EINVAL;
+ }
+
+ kfree(port->tcp_congestion);
+ port->tcp_congestion = buf;
+
+ return count;
+}
+
+CONFIGFS_ATTR(nvmet_, tcp_congestion);
+
static ssize_t nvmet_param_inline_data_size_show(struct config_item *item,
char *page)
{
@@ -1597,6 +1637,7 @@ static void nvmet_port_release(struct config_item *item)
list_del(&port->global_entry);
kfree(port->ana_state);
+ kfree(port->tcp_congestion);
kfree(port);
}
@@ -1605,6 +1646,7 @@ static struct configfs_attribute *nvmet_port_attrs[] = {
&nvmet_attr_addr_treq,
&nvmet_attr_addr_traddr,
&nvmet_attr_addr_trsvcid,
+ &nvmet_attr_tcp_congestion,
&nvmet_attr_addr_trtype,
&nvmet_attr_param_inline_data_size,
#ifdef CONFIG_BLK_DEV_INTEGRITY
diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h
index 69637bf8f8e1..76a57c4c3456 100644
--- a/drivers/nvme/target/nvmet.h
+++ b/drivers/nvme/target/nvmet.h
@@ -145,6 +145,7 @@ struct nvmet_port {
struct config_group ana_groups_group;
struct nvmet_ana_group ana_default_group;
enum nvme_ana_state *ana_state;
+ const char *tcp_congestion;
void *priv;
bool enabled;
int inline_data_size;
diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c
index 83ca577f72be..311383c6d7da 100644
--- a/drivers/nvme/target/tcp.c
+++ b/drivers/nvme/target/tcp.c
@@ -1741,6 +1741,19 @@ static int nvmet_tcp_add_port(struct nvmet_port *nport)
if (so_priority > 0)
sock_set_priority(port->sock->sk, so_priority);
+ if (nport->tcp_congestion) {
+ lock_sock(port->sock->sk);
+ ret = tcp_set_congestion_control(port->sock->sk,
+ nport->tcp_congestion,
+ true, true);
+ release_sock(port->sock->sk);
+ if (ret) {
+ pr_err("failed to set port socket's congestion to %s: %d\n",
+ nport->tcp_congestion, ret);
+ goto err_sock;
+ }
+ }
+
ret = kernel_bind(port->sock, (struct sockaddr *)&port->addr,
sizeof(port->addr));
if (ret) {
--
2.26.2
Powered by blists - more mailing lists