netdev - [PATCH net-next v5 6/8] dpaa2-mac: move setting up supported

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220311212228.3918494-7-ioana.ciornei@nxp.com>
Date:   Fri, 11 Mar 2022 23:22:26 +0200
From:   Ioana Ciornei <ioana.ciornei@....com>
To:     davem@...emloft.net, kuba@...nel.org, netdev@...r.kernel.org
Cc:     kishon@...com, vkoul@...nel.org, robh+dt@...nel.org,
        leoyang.li@....com, linux-phy@...ts.infradead.org,
        devicetree@...r.kernel.org, linux@...linux.org.uk,
        shawnguo@...nel.org, hongxing.zhu@....com,
        Ioana Ciornei <ioana.ciornei@....com>
Subject: [PATCH net-next v5 6/8] dpaa2-mac: move setting up supported_interfaces into a function

The logic to setup the supported interfaces will get annotated based on
what the configuration of the SerDes PLLs supports. Move the current
setup into a separate function just to try to keep it clean.

Signed-off-by: Ioana Ciornei <ioana.ciornei@....com>
---
Changes in v2:
	- none
Changes in v3:
	- none
Changes in v4:
	- none
Changes in v5:
	- none

 .../net/ethernet/freescale/dpaa2/dpaa2-mac.c  | 43 +++++++++++--------
 1 file changed, 24 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
index c4a49bf10156..e6e758eaafea 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
@@ -257,6 +257,29 @@ static void dpaa2_pcs_destroy(struct dpaa2_mac *mac)
 	}
 }
 
+static void dpaa2_mac_set_supported_interfaces(struct dpaa2_mac *mac)
+{
+	/* We support the current interface mode, and if we have a PCS
+	 * similar interface modes that do not require the SerDes lane to be
+	 * reconfigured.
+	 */
+	__set_bit(mac->if_mode, mac->phylink_config.supported_interfaces);
+	if (mac->pcs) {
+		switch (mac->if_mode) {
+		case PHY_INTERFACE_MODE_1000BASEX:
+		case PHY_INTERFACE_MODE_SGMII:
+			__set_bit(PHY_INTERFACE_MODE_1000BASEX,
+				  mac->phylink_config.supported_interfaces);
+			__set_bit(PHY_INTERFACE_MODE_SGMII,
+				  mac->phylink_config.supported_interfaces);
+			break;
+
+		default:
+			break;
+		}
+	}
+}
+
 int dpaa2_mac_connect(struct dpaa2_mac *mac)
 {
 	struct net_device *net_dev = mac->net_dev;
@@ -305,25 +328,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 		MAC_10FD | MAC_100FD | MAC_1000FD | MAC_2500FD | MAC_5000FD |
 		MAC_10000FD;
 
-	/* We support the current interface mode, and if we have a PCS
-	 * similar interface modes that do not require the PLLs to be
-	 * reconfigured.
-	 */
-	__set_bit(mac->if_mode, mac->phylink_config.supported_interfaces);
-	if (mac->pcs) {
-		switch (mac->if_mode) {
-		case PHY_INTERFACE_MODE_1000BASEX:
-		case PHY_INTERFACE_MODE_SGMII:
-			__set_bit(PHY_INTERFACE_MODE_1000BASEX,
-				  mac->phylink_config.supported_interfaces);
-			__set_bit(PHY_INTERFACE_MODE_SGMII,
-				  mac->phylink_config.supported_interfaces);
-			break;
-
-		default:
-			break;
-		}
-	}
+	dpaa2_mac_set_supported_interfaces(mac);
 
 	phylink = phylink_create(&mac->phylink_config,
 				 dpmac_node, mac->if_mode,
-- 
2.33.1