| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1198ce91-24ee-3d66-6045-9cf287f23459@gmail.com>
Date: Tue, 15 Mar 2022 20:24:32 +0100
From: Heiner Kallweit <hkallweit1@...il.com>
To: Yanko Kaneti <yaneti@...lera.com>
Cc: "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
Nicfae <Nicfae@...ltek.com>,
Kevin_cheng <kevin_cheng@...ltek.com>
Subject: Re: r8169: rtl8168ep_driver_stop disables the DASH port
On 15.03.2022 15:19, Yanko Kaneti wrote:
> On Tue, 2022-03-15 at 12:25 +0200, Yanko Kaneti wrote:
>> On Tue, 2022-03-15 at 11:40 +0200, Yanko Kaneti wrote:
>>> On Mon, 2022-03-14 at 22:24 +0100, Heiner Kallweit wrote:
>>>> On 14.03.2022 15:05, Yanko Kaneti wrote:
>>>>> On Mon, 2022-03-14 at 01:00 +0000, Kevin_cheng wrote:
>>>>> Hello Kevin,
>>>>>
>>>>>> Thanks for your email. Linux DASH requires specific driver and client
>>>>>> tool. It depends on the manufacturer’s requirement. You need to
>>>>>> contact ASRock to make sure they support Linux DASH and have verified
>>>>>> it.
>>>>>
>>>>> Thanks for the answer but its not much help for me.
>>>>> I am not going to use a driver that's not in mainline.
>>>>>
>>>>> I wasn't really expecting full DASH support but that at least
>>>>> r8169/linux does not prevent the limied DASH web interface functionality
>>>>> from working.
>>>>>
>>>>> Currently this is not the case on this board with the current BIOS:
>>>>> - Once the kernel is loaded the DASH web interface power management
>>>>> (reset, hard off) no longer works
>>>>> - Normal shutdown or r8169 module unload actually disconnects the phy.
>>>>>
>>>>> It would be nice if DASH basics worked without being broken/supported by
>>>>> the OS.
>>>>>
>>>>> Regards
>>>>> Yanko
>>>>>
>>>>>>
>>>>>> Best Regards
>>>>>> Kevin Cheng
>>>>>> Technical Support Dept.
>>>>>> Realtek Semiconductor Corp.
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Yanko Kaneti <yaneti@...lera.com>
>>>>>> Sent: Friday, March 11, 2022 9:12 PM
>>>>>> To: Heiner Kallweit <hkallweit1@...il.com>; nic_swsd
>>>>>> <nic_swsd@...ltek.com>
>>>>>> Cc: netdev <netdev@...r.kernel.org>
>>>>>> Subject: r8169: rtl8168ep_driver_stop disables the DASH port
>>>>>>
>>>>>> Hello,
>>>>>>
>>>>>> Testing DASH on a ASRock A520M-HDVP/DASH, which has a RTL8111/8168 EP
>>>>>> chip. DASH is enabled and seems to work on BIOS/firmware level.
>>>>>>
>>>>>> It seems that r8169's cleanup/exit in rtl8168ep_driver_stop manages to
>>>>>> actually stop the LAN port, hence cutting the system remote
>>>>>> management.
>>>>>>
>>>>>> This is evident on plain shutdown or rmmod r8169.
>>>>>> If one does a hardware reset or echo "b" > /proc/sysrq-trigger the
>>>>>> cleanup doesn't happen and the DASH firmware remains in working order
>>>>>> and the LAN port remains up.
>>>>>>
>>>>>> A520M-HDVP/DASH BIOS ver 1.70
>>>>>> Reatlek fw:
>>>>>> Firmware Version: 3.0.0.20200423
>>>>>> Version String: 20200428.1200000113
>>>>>>
>>>>>> I have no idea if its possible or how to update the realtek firmware,
>>>>>> preferably from Linux.
>>>>>>
>>>>>> Various other DASH functionality seems to not work but basic working
>>>>>> power managements is really a deal breaker for the whole thing.
>>>>>>
>>>>>>
>>>>>> Regards
>>>>>> Yanko
>>>>>> ------Please consider the environment before printing this e-mail.
>>>>>
>>>>
>>>> Realtek doesn't provide any public datasheets, therefore it's hard to say
>>>> how DASH is handled in the chip.
>>>> However there are few places left where the PHY may be suspended w/o
>>>> checking for DASH. Can you try the following?
>>>>
>>>>
>>>> diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
>>>> index 67014eb76..95788ce7a 100644
>>>> --- a/drivers/net/ethernet/realtek/r8169_main.c
>>>> +++ b/drivers/net/ethernet/realtek/r8169_main.c
>>>> @@ -1397,8 +1397,13 @@ static void __rtl8169_set_wol(struct rtl8169_private *tp, u32 wolopts)
>>>> rtl_lock_config_regs(tp);
>>>>
>>>> device_set_wakeup_enable(tp_to_dev(tp), wolopts);
>>>> - rtl_set_d3_pll_down(tp, !wolopts);
>>>> - tp->dev->wol_enabled = wolopts ? 1 : 0;
>>>> + if (tp->dash_type == RTL_DASH_NONE) {
>>>> + rtl_set_d3_pll_down(tp, !wolopts);
>>>> + tp->dev->wol_enabled = wolopts ? 1 : 0;
>>>> + } else {
>>>> + /* keep PHY from suspending if DASH is enabled */
>>>> + tp->dev->wol_enabled = 1;
>>>> + }
>>>> }
>>>>
>>>> static int rtl8169_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
>>>> @@ -4672,7 +4677,7 @@ static void r8169_phylink_handler(struct net_device *ndev)
>>>> if (netif_carrier_ok(ndev)) {
>>>> rtl_link_chg_patch(tp);
>>>> pm_request_resume(&tp->pci_dev->dev);
>>>> - } else {
>>>> + } else if (tp->dash_type == RTL_DASH_NONE) {
>>>> pm_runtime_idle(&tp->pci_dev->dev);
>>>> }
>>>>
>>>> @@ -4978,7 +4983,8 @@ static void rtl_shutdown(struct pci_dev *pdev)
>>>> /* Restore original MAC address */
>>>> rtl_rar_set(tp, tp->dev->perm_addr);
>>>>
>>>> - if (system_state == SYSTEM_POWER_OFF) {
>>>> + if (system_state == SYSTEM_POWER_OFF &&
>>>> + tp->dash_type == RTL_DASH_NONE) {
>>>> if (tp->saved_wolopts)
>>>> rtl_wol_shutdown_quirk(tp);
>>>>
>>>
>>> Thanks Heiner.
>>> So I tried this over linus tip from today and unfortunately it doesn't
>>> help the shutdown or rmmod.
>>> With the couple more additions below I can get it to stay up on rmmod ,
>>> but still after that , shutdown still brings it down. Perhaps that
>>> leaves all to the BIOS/realtek firmware..
>>>
>>>
>>> diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
>>> index 19e2621e0645..d5d85a44be3e 100644
>>> --- a/drivers/net/ethernet/realtek/r8169_main.c
>>> +++ b/drivers/net/ethernet/realtek/r8169_main.c
>>> @@ -4675,7 +4680,8 @@ static void rtl8169_down(struct rtl8169_private *tp)
>>> /* Clear all task flags */
>>> bitmap_zero(tp->wk.flags, RTL_FLAG_MAX);
>>>
>>> - phy_stop(tp->phydev);
>>> + if (tp->dash_type == RTL_DASH_NONE)
>>> + phy_stop(tp->phydev);
>>>
>>> rtl8169_update_counters(tp);
>>>
>>> @@ -4715,7 +4721,8 @@ static int rtl8169_close(struct net_device *dev)
>>>
>>> free_irq(tp->irq, tp);
>>>
>>> - phy_disconnect(tp->phydev);
>>> + if (tp->dash_type == RTL_DASH_NONE)
>>> + phy_disconnect(tp->phydev);
>>>
>>> dma_free_coherent(&pdev->dev, R8169_RX_RING_BYTES, tp->RxDescArray,
>>> tp->RxPhyAddr);
>>>
>>
>> Some additional data points:
>>
>> - with r8169 blacklisted the link survives shutdown
>>
>> - even with r8169 blacklisted the DASH web interface stops being able to
>> control power/off/reset
>>
>> - with rtl8168_driver_start/stop commented followed by rmmod r8169 and
>> link still up it still goes down on shutdown
>
> After some random poking I managed to keep the link up after shutdown.
> All the previous bits plus this init tweak:
>
> @@ -5409,7 +5417,8 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> /* configure chip for default features */
> rtl8169_set_features(dev, dev->features);
>
> - rtl_set_d3_pll_down(tp, true);
> + if (tp->dash_type == RTL_DASH_NONE)
> + rtl_set_d3_pll_down(tp, true);
>
> jumbo_max = rtl_jumbo_max(tp);
> if (jumbo_max)
>
Thanks for your efforts. We can not omit the phy_.. calls in the non-DASH case,
therefore could you please test the following (replacing the first attempt)?
diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 67014eb76..33f5c5698 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -1397,8 +1397,11 @@ static void __rtl8169_set_wol(struct rtl8169_private *tp, u32 wolopts)
rtl_lock_config_regs(tp);
device_set_wakeup_enable(tp_to_dev(tp), wolopts);
- rtl_set_d3_pll_down(tp, !wolopts);
- tp->dev->wol_enabled = wolopts ? 1 : 0;
+
+ if (tp->dash_type == RTL_DASH_NONE) {
+ rtl_set_d3_pll_down(tp, !wolopts);
+ tp->dev->wol_enabled = wolopts ? 1 : 0;
+ }
}
static int rtl8169_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
@@ -4938,6 +4941,9 @@ static int rtl8169_runtime_idle(struct device *device)
{
struct rtl8169_private *tp = dev_get_drvdata(device);
+ if (tp->dash_type != RTL_DASH_NONE)
+ return -EBUSY;
+
if (!netif_running(tp->dev) || !netif_carrier_ok(tp->dev))
pm_schedule_suspend(device, 10000);
@@ -4978,7 +4984,8 @@ static void rtl_shutdown(struct pci_dev *pdev)
/* Restore original MAC address */
rtl_rar_set(tp, tp->dev->perm_addr);
- if (system_state == SYSTEM_POWER_OFF) {
+ if (system_state == SYSTEM_POWER_OFF &&
+ tp->dash_type == RTL_DASH_NONE) {
if (tp->saved_wolopts)
rtl_wol_shutdown_quirk(tp);
@@ -5449,7 +5456,12 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* configure chip for default features */
rtl8169_set_features(dev, dev->features);
- rtl_set_d3_pll_down(tp, true);
+ if (tp->dash_type == RTL_DASH_NONE) {
+ rtl_set_d3_pll_down(tp, true);
+ } else {
+ rtl_set_d3_pll_down(tp, false);
+ dev->wol_enabled = 1;
+ }
jumbo_max = rtl_jumbo_max(tp);
if (jumbo_max)
--
2.35.1
Powered by blists - more mailing lists