netdev - Re: [PATCH net] ice: Clear default forwarding VSI during VSI release

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <45b155ff-8e26-fa96-f89e-6a561de01abb@linux.intel.com>
Date:   Wed, 23 Mar 2022 18:39:11 +0100
From:   Marcin Szycik <marcin.szycik@...ux.intel.com>
To:     Ivan Vecera <ivecera@...hat.com>, netdev@...r.kernel.org
Cc:     poros@...hat.com, mschmidt@...hat.com,
        Jesse Brandeburg <jesse.brandeburg@...el.com>,
        Tony Nguyen <anthony.l.nguyen@...el.com>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Brett Creeley <brett.creeley@...el.com>,
        Jeff Kirsher <jeffrey.t.kirsher@...el.com>,
        "moderated list:INTEL ETHERNET DRIVERS" 
        <intel-wired-lan@...ts.osuosl.org>,
        open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH net] ice: Clear default forwarding VSI during VSI release



On 22-Mar-22 15:25, Ivan Vecera wrote:
> VSI is set as default forwarding one when promisc mode is set for
> PF interface, when PF is switched to switchdev mode or when VF
> driver asks to enable allmulticast or promisc mode for the VF
> interface (when vf-true-promisc-support priv flag is off).
> The third case is buggy because in that case VSI associated with
> VF remains as default one after VF removal.
> 
> Reproducer:
> 1. Create VF
>    echo 1 > sys/class/net/ens7f0/device/sriov_numvfs
> 2. Enable allmulticast or promisc mode on VF
>    ip link set ens7f0v0 allmulticast on
>    ip link set ens7f0v0 promisc on
> 3. Delete VF
>    echo 0 > sys/class/net/ens7f0/device/sriov_numvfs
> 4. Try to enable promisc mode on PF
>    ip link set ens7f0 promisc on
> 
> Although it looks that promisc mode on PF is enabled the opposite
> is true because ice_vsi_sync_fltr() responsible for IFF_PROMISC
> handling first checks if any other VSI is set as default forwarding
> one and if so the function does not do anything. At this point
> it is not possible to enable promisc mode on PF without re-probe
> device.
> 
> To resolve the issue this patch clear default forwarding VSI
> during ice_vsi_release() when the VSI to be released is the default
> one.
> 
> Fixes: 01b5e89aab49 ("ice: Add VF promiscuous support")
> Signed-off-by: Ivan Vecera <ivecera@...hat.com>
> ---
>  drivers/net/ethernet/intel/ice/ice_lib.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
> index 53256aca27c7..20d755822d43 100644
> --- a/drivers/net/ethernet/intel/ice/ice_lib.c
> +++ b/drivers/net/ethernet/intel/ice/ice_lib.c
> @@ -3147,6 +3147,8 @@ int ice_vsi_release(struct ice_vsi *vsi)
>  		}
>  	}
>  
> +	if (ice_is_vsi_dflt_vsi(pf->first_sw, vsi))
> +		ice_clear_dflt_vsi(pf->first_sw);

It would probably be good to check `ice_clear_dflt_vsi` return code.

>  	ice_fltr_remove_all(vsi);
>  	ice_rm_vsi_lan_cfg(vsi->port_info, vsi->idx);
>  	err = ice_rm_vsi_rdma_cfg(vsi->port_info, vsi->idx);