netdev - [PATCH RFC net-next 5/5] net: phylink: handle the new is_c45_over

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 23 Mar 2022 19:34:19 +0100
From:   Michael Walle <michael@...le.cc>
To:     Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>
Cc:     "David S . Miller" <davem@...emloft.net>,
        Xu Liang <lxu@...linear.com>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        Michael Walle <michael@...le.cc>
Subject: [PATCH RFC net-next 5/5] net: phylink: handle the new is_c45_over_c22 property

Phylink treats C45 PHYs in a special way and assumes they can switch
their SerDes lanes between modes. This check is done by looking at the
is_c45 property. But there are PHYs, namely the GPY215, which are C45
PHYs but behind a C22 bus. Thus while the PHY is a C45 one, the is_c45
property is not set because it uses indirect MMD access via the C22
registers. Therefore, add the is_c45_over_c22  property to the check,
which indicates this sort of PHY handling.

Signed-off-by: Michael Walle <michael@...le.cc>
---
 drivers/net/phy/phylink.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 06943889d747..633cccfbd5f4 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1369,7 +1369,7 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy,
 	 * speeds. We really need to know which interface modes the PHY and
 	 * MAC supports to properly work out which linkmodes can be supported.
 	 */
-	if (phy->is_c45 &&
+	if ((phy->is_c45 || phy->is_c45_over_c22) &&
 	    interface != PHY_INTERFACE_MODE_RXAUI &&
 	    interface != PHY_INTERFACE_MODE_XAUI &&
 	    interface != PHY_INTERFACE_MODE_USXGMII)
-- 
2.30.2