| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220326165909.506926-22-benni@stuerz.xyz>
Date: Sat, 26 Mar 2022 17:59:09 +0100
From: Benjamin Stürz <benni@...erz.xyz>
To: andrew@...n.ch
Cc: sebastian.hesselbarth@...il.com, gregory.clement@...tlin.com,
linux@...linux.org.uk, linux@...tec.co.uk, krzk@...nel.org,
alim.akhtar@...sung.com, tglx@...utronix.de, mingo@...hat.com,
bp@...en8.de, dave.hansen@...ux.intel.com, hpa@...or.com,
robert.moore@...el.com, rafael.j.wysocki@...el.com,
lenb@...nel.org, 3chas3@...il.com, laforge@...monks.org,
arnd@...db.de, gregkh@...uxfoundation.org, mchehab@...nel.org,
tony.luck@...el.com, james.morse@....com, rric@...nel.org,
linus.walleij@...aro.org, brgl@...ev.pl,
mike.marciniszyn@...nelisnetworks.com,
dennis.dalessandro@...nelisnetworks.com, jgg@...pe.ca,
pali@...nel.org, dmitry.torokhov@...il.com, isdn@...ux-pingi.de,
benh@...nel.crashing.org, fbarrat@...ux.ibm.com, ajd@...ux.ibm.com,
davem@...emloft.net, kuba@...nel.org, pabeni@...hat.com,
nico@...xnic.net, loic.poulain@...aro.org, kvalo@...nel.org,
pkshih@...ltek.com, bhelgaas@...gle.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-samsung-soc@...r.kernel.org, linux-ia64@...r.kernel.org,
linux-acpi@...r.kernel.org, devel@...ica.org,
linux-atm-general@...ts.sourceforge.net, netdev@...r.kernel.org,
linux-edac@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-rdma@...r.kernel.org, linux-input@...r.kernel.org,
linuxppc-dev@...ts.ozlabs.org, linux-media@...r.kernel.org,
wcn36xx@...ts.infradead.org, linux-wireless@...r.kernel.org,
linux-pci@...r.kernel.org,
Benjamin Stürz <benni@...erz.xyz>
Subject: [PATCH 22/22] pci: Replace comments with C99 initializers
This replaces comments with C99's designated
initializers because the kernel supports them now.
Signed-off-by: Benjamin Stürz <benni@...erz.xyz>
---
drivers/pci/probe.c | 116 ++++++++++++++++++++++----------------------
1 file changed, 58 insertions(+), 58 deletions(-)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 17a969942d37..3de27b0765c8 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -653,42 +653,42 @@ EXPORT_SYMBOL(pci_free_host_bridge);
/* Indexed by PCI_X_SSTATUS_FREQ (secondary bus mode and frequency) */
static const unsigned char pcix_bus_speed[] = {
- PCI_SPEED_UNKNOWN, /* 0 */
- PCI_SPEED_66MHz_PCIX, /* 1 */
- PCI_SPEED_100MHz_PCIX, /* 2 */
- PCI_SPEED_133MHz_PCIX, /* 3 */
- PCI_SPEED_UNKNOWN, /* 4 */
- PCI_SPEED_66MHz_PCIX_ECC, /* 5 */
- PCI_SPEED_100MHz_PCIX_ECC, /* 6 */
- PCI_SPEED_133MHz_PCIX_ECC, /* 7 */
- PCI_SPEED_UNKNOWN, /* 8 */
- PCI_SPEED_66MHz_PCIX_266, /* 9 */
- PCI_SPEED_100MHz_PCIX_266, /* A */
- PCI_SPEED_133MHz_PCIX_266, /* B */
- PCI_SPEED_UNKNOWN, /* C */
- PCI_SPEED_66MHz_PCIX_533, /* D */
- PCI_SPEED_100MHz_PCIX_533, /* E */
- PCI_SPEED_133MHz_PCIX_533 /* F */
+ [0x0] = PCI_SPEED_UNKNOWN,
+ [0x1] = PCI_SPEED_66MHz_PCIX,
+ [0x2] = PCI_SPEED_100MHz_PCIX,
+ [0x3] = PCI_SPEED_133MHz_PCIX,
+ [0x4] = PCI_SPEED_UNKNOWN,
+ [0x5] = PCI_SPEED_66MHz_PCIX_ECC,
+ [0x6] = PCI_SPEED_100MHz_PCIX_ECC,
+ [0x7] = PCI_SPEED_133MHz_PCIX_ECC,
+ [0x8] = PCI_SPEED_UNKNOWN,
+ [0x9] = PCI_SPEED_66MHz_PCIX_266,
+ [0xA] = PCI_SPEED_100MHz_PCIX_266,
+ [0xB] = PCI_SPEED_133MHz_PCIX_266,
+ [0xC] = PCI_SPEED_UNKNOWN,
+ [0xD] = PCI_SPEED_66MHz_PCIX_533,
+ [0xE] = PCI_SPEED_100MHz_PCIX_533,
+ [0xF] = PCI_SPEED_133MHz_PCIX_533
};
/* Indexed by PCI_EXP_LNKCAP_SLS, PCI_EXP_LNKSTA_CLS */
const unsigned char pcie_link_speed[] = {
- PCI_SPEED_UNKNOWN, /* 0 */
- PCIE_SPEED_2_5GT, /* 1 */
- PCIE_SPEED_5_0GT, /* 2 */
- PCIE_SPEED_8_0GT, /* 3 */
- PCIE_SPEED_16_0GT, /* 4 */
- PCIE_SPEED_32_0GT, /* 5 */
- PCIE_SPEED_64_0GT, /* 6 */
- PCI_SPEED_UNKNOWN, /* 7 */
- PCI_SPEED_UNKNOWN, /* 8 */
- PCI_SPEED_UNKNOWN, /* 9 */
- PCI_SPEED_UNKNOWN, /* A */
- PCI_SPEED_UNKNOWN, /* B */
- PCI_SPEED_UNKNOWN, /* C */
- PCI_SPEED_UNKNOWN, /* D */
- PCI_SPEED_UNKNOWN, /* E */
- PCI_SPEED_UNKNOWN /* F */
+ [0x0] = PCI_SPEED_UNKNOWN,
+ [0x1] = PCIE_SPEED_2_5GT,
+ [0x2] = PCIE_SPEED_5_0GT,
+ [0x3] = PCIE_SPEED_8_0GT,
+ [0x4] = PCIE_SPEED_16_0GT,
+ [0x5] = PCIE_SPEED_32_0GT,
+ [0x6] = PCIE_SPEED_64_0GT,
+ [0x7] = PCI_SPEED_UNKNOWN,
+ [0x8] = PCI_SPEED_UNKNOWN,
+ [0x9] = PCI_SPEED_UNKNOWN,
+ [0xA] = PCI_SPEED_UNKNOWN,
+ [0xB] = PCI_SPEED_UNKNOWN,
+ [0xC] = PCI_SPEED_UNKNOWN,
+ [0xD] = PCI_SPEED_UNKNOWN,
+ [0xE] = PCI_SPEED_UNKNOWN,
+ [0xF] = PCI_SPEED_UNKNOWN
};
EXPORT_SYMBOL_GPL(pcie_link_speed);
@@ -696,32 +696,32 @@ const char *pci_speed_string(enum pci_bus_speed speed)
{
/* Indexed by the pci_bus_speed enum */
static const char *speed_strings[] = {
- "33 MHz PCI", /* 0x00 */
- "66 MHz PCI", /* 0x01 */
- "66 MHz PCI-X", /* 0x02 */
- "100 MHz PCI-X", /* 0x03 */
- "133 MHz PCI-X", /* 0x04 */
- NULL, /* 0x05 */
- NULL, /* 0x06 */
- NULL, /* 0x07 */
- NULL, /* 0x08 */
- "66 MHz PCI-X 266", /* 0x09 */
- "100 MHz PCI-X 266", /* 0x0a */
- "133 MHz PCI-X 266", /* 0x0b */
- "Unknown AGP", /* 0x0c */
- "1x AGP", /* 0x0d */
- "2x AGP", /* 0x0e */
- "4x AGP", /* 0x0f */
- "8x AGP", /* 0x10 */
- "66 MHz PCI-X 533", /* 0x11 */
- "100 MHz PCI-X 533", /* 0x12 */
- "133 MHz PCI-X 533", /* 0x13 */
- "2.5 GT/s PCIe", /* 0x14 */
- "5.0 GT/s PCIe", /* 0x15 */
- "8.0 GT/s PCIe", /* 0x16 */
- "16.0 GT/s PCIe", /* 0x17 */
- "32.0 GT/s PCIe", /* 0x18 */
- "64.0 GT/s PCIe", /* 0x19 */
+ [0x00] = "33 MHz PCI",
+ [0x01] = "66 MHz PCI",
+ [0x02] = "66 MHz PCI-X",
+ [0x03] = "100 MHz PCI-X",
+ [0x04] = "133 MHz PCI-X",
+ [0x05] = NULL,
+ [0x06] = NULL,
+ [0x07] = NULL,
+ [0x08] = NULL,
+ [0x09] = "66 MHz PCI-X 266",
+ [0x0a] = "100 MHz PCI-X 266",
+ [0x0b] = "133 MHz PCI-X 266",
+ [0x0c] = "Unknown AGP",
+ [0x0d] = "1x AGP",
+ [0x0e] = "2x AGP",
+ [0x0f] = "4x AGP",
+ [0x10] = "8x AGP",
+ [0x11] = "66 MHz PCI-X 533",
+ [0x12] = "100 MHz PCI-X 533",
+ [0x13] = "133 MHz PCI-X 533",
+ [0x14] = "2.5 GT/s PCIe",
+ [0x15] = "5.0 GT/s PCIe",
+ [0x16] = "8.0 GT/s PCIe",
+ [0x17] = "16.0 GT/s PCIe",
+ [0x18] = "32.0 GT/s PCIe",
+ [0x19] = "64.0 GT/s PCIe",
};
if (speed < ARRAY_SIZE(speed_strings))
--
2.35.1
Powered by blists - more mailing lists