lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220326192454.14115baa@coco.lan>
Date:   Sat, 26 Mar 2022 19:24:54 +0100
From:   Mauro Carvalho Chehab <mchehab@...nel.org>
To:     Benjamin Stürz <benni@...erz.xyz>
Cc:     andrew@...n.ch, sebastian.hesselbarth@...il.com,
        gregory.clement@...tlin.com, linux@...linux.org.uk,
        linux@...tec.co.uk, krzk@...nel.org, alim.akhtar@...sung.com,
        tglx@...utronix.de, mingo@...hat.com, bp@...en8.de,
        dave.hansen@...ux.intel.com, hpa@...or.com, robert.moore@...el.com,
        rafael.j.wysocki@...el.com, lenb@...nel.org, 3chas3@...il.com,
        laforge@...monks.org, arnd@...db.de, gregkh@...uxfoundation.org,
        tony.luck@...el.com, james.morse@....com, rric@...nel.org,
        linus.walleij@...aro.org, brgl@...ev.pl,
        mike.marciniszyn@...nelisnetworks.com,
        dennis.dalessandro@...nelisnetworks.com, jgg@...pe.ca,
        pali@...nel.org, dmitry.torokhov@...il.com, isdn@...ux-pingi.de,
        benh@...nel.crashing.org, fbarrat@...ux.ibm.com, ajd@...ux.ibm.com,
        davem@...emloft.net, kuba@...nel.org, pabeni@...hat.com,
        nico@...xnic.net, loic.poulain@...aro.org, kvalo@...nel.org,
        pkshih@...ltek.com, bhelgaas@...gle.com,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-samsung-soc@...r.kernel.org, linux-ia64@...r.kernel.org,
        linux-acpi@...r.kernel.org, devel@...ica.org,
        linux-atm-general@...ts.sourceforge.net, netdev@...r.kernel.org,
        linux-edac@...r.kernel.org, linux-gpio@...r.kernel.org,
        linux-rdma@...r.kernel.org, linux-input@...r.kernel.org,
        linuxppc-dev@...ts.ozlabs.org, linux-media@...r.kernel.org,
        wcn36xx@...ts.infradead.org, linux-wireless@...r.kernel.org,
        linux-pci@...r.kernel.org
Subject: Re: [PATCH 16/22] dvb-usb: Replace comments with C99 initializers

Em Sat, 26 Mar 2022 17:59:03 +0100
Benjamin Stürz <benni@...erz.xyz> escreveu:

> This replaces comments with C99's designated
> initializers because the kernel supports them now.
> 
> Signed-off-by: Benjamin Stürz <benni@...erz.xyz>
> ---
>  drivers/media/usb/dvb-usb/dibusb-mb.c | 62 +++++++++++++--------------
>  drivers/media/usb/dvb-usb/dibusb-mc.c | 34 +++++++--------
>  2 files changed, 48 insertions(+), 48 deletions(-)
> 
> diff --git a/drivers/media/usb/dvb-usb/dibusb-mb.c b/drivers/media/usb/dvb-usb/dibusb-mb.c
> index e9dc27f73970..f188e07f518b 100644
> --- a/drivers/media/usb/dvb-usb/dibusb-mb.c
> +++ b/drivers/media/usb/dvb-usb/dibusb-mb.c
> @@ -122,40 +122,40 @@ static int dibusb_probe(struct usb_interface *intf,
>  
>  /* do not change the order of the ID table */
>  static struct usb_device_id dibusb_dib3000mb_table [] = {
> -/* 00 */	{ USB_DEVICE(USB_VID_WIDEVIEW,		USB_PID_AVERMEDIA_DVBT_USB_COLD) },
> -/* 01 */	{ USB_DEVICE(USB_VID_WIDEVIEW,		USB_PID_AVERMEDIA_DVBT_USB_WARM) },
> -/* 02 */	{ USB_DEVICE(USB_VID_COMPRO,		USB_PID_COMPRO_DVBU2000_COLD) },
> -/* 03 */	{ USB_DEVICE(USB_VID_COMPRO,		USB_PID_COMPRO_DVBU2000_WARM) },
> -/* 04 */	{ USB_DEVICE(USB_VID_COMPRO_UNK,	USB_PID_COMPRO_DVBU2000_UNK_COLD) },
> -/* 05 */	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3000_COLD) },
> -/* 06 */	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3000_WARM) },
> -/* 07 */	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_KWORLD_VSTREAM_COLD) },
> -/* 08 */	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_KWORLD_VSTREAM_WARM) },
> -/* 09 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_GRANDTEC_DVBT_USB_COLD) },
> -/* 10 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_GRANDTEC_DVBT_USB_WARM) },
> -/* 11 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_DIBCOM_MOD3000_COLD) },
> -/* 12 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_DIBCOM_MOD3000_WARM) },
> -/* 13 */	{ USB_DEVICE(USB_VID_HYPER_PALTEK,	USB_PID_UNK_HYPER_PALTEK_COLD) },
> -/* 14 */	{ USB_DEVICE(USB_VID_HYPER_PALTEK,	USB_PID_UNK_HYPER_PALTEK_WARM) },
> -/* 15 */	{ USB_DEVICE(USB_VID_VISIONPLUS,	USB_PID_TWINHAN_VP7041_COLD) },
> -/* 16 */	{ USB_DEVICE(USB_VID_VISIONPLUS,	USB_PID_TWINHAN_VP7041_WARM) },
> -/* 17 */	{ USB_DEVICE(USB_VID_TWINHAN,		USB_PID_TWINHAN_VP7041_COLD) },
> -/* 18 */	{ USB_DEVICE(USB_VID_TWINHAN,		USB_PID_TWINHAN_VP7041_WARM) },
> -/* 19 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_COLD) },
> -/* 20 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_WARM) },
> -/* 21 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_AN2235_COLD) },
> -/* 22 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_AN2235_WARM) },
> -/* 23 */	{ USB_DEVICE(USB_VID_ADSTECH,		USB_PID_ADSTECH_USB2_COLD) },
> +[0]  =	{ USB_DEVICE(USB_VID_WIDEVIEW,		USB_PID_AVERMEDIA_DVBT_USB_COLD) },
> +[1]  =	{ USB_DEVICE(USB_VID_WIDEVIEW,		USB_PID_AVERMEDIA_DVBT_USB_WARM) },

While here, please properly indent this table, and respect the 80-columns limit,
e. g.:

static struct usb_device_id dibusb_dib3000mb_table [] = {
	[0] = { USB_DEVICE(USB_VID_WIDEVIEW 
			   USB_PID_AVERMEDIA_DVBT_USB_COLD) 
	},
	[1]  =	{ USB_DEVICE(USB_VID_WIDEVIEW,
			     USB_PID_AVERMEDIA_DVBT_USB_WARM)
	},
	...

	
Regards,
Mauro

> +[2]  =	{ USB_DEVICE(USB_VID_COMPRO,		USB_PID_COMPRO_DVBU2000_COLD) },
> +[3]  =	{ USB_DEVICE(USB_VID_COMPRO,		USB_PID_COMPRO_DVBU2000_WARM) },
> +[4]  =	{ USB_DEVICE(USB_VID_COMPRO_UNK,	USB_PID_COMPRO_DVBU2000_UNK_COLD) },
> +[5]  =	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3000_COLD) },
> +[6]  =	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3000_WARM) },
> +[7]  =	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_KWORLD_VSTREAM_COLD) },
> +[8]  =	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_KWORLD_VSTREAM_WARM) },
> +[9]  =	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_GRANDTEC_DVBT_USB_COLD) },
> +[10] =	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_GRANDTEC_DVBT_USB_WARM) },
> +[11] =	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_DIBCOM_MOD3000_COLD) },
> +[12] =	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_DIBCOM_MOD3000_WARM) },
> +[13] =	{ USB_DEVICE(USB_VID_HYPER_PALTEK,	USB_PID_UNK_HYPER_PALTEK_COLD) },
> +[14] =	{ USB_DEVICE(USB_VID_HYPER_PALTEK,	USB_PID_UNK_HYPER_PALTEK_WARM) },
> +[15] =	{ USB_DEVICE(USB_VID_VISIONPLUS,	USB_PID_TWINHAN_VP7041_COLD) },
> +[16] =	{ USB_DEVICE(USB_VID_VISIONPLUS,	USB_PID_TWINHAN_VP7041_WARM) },
> +[17] =	{ USB_DEVICE(USB_VID_TWINHAN,		USB_PID_TWINHAN_VP7041_COLD) },
> +[18] =	{ USB_DEVICE(USB_VID_TWINHAN,		USB_PID_TWINHAN_VP7041_WARM) },
> +[19] =	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_COLD) },
> +[20] =	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_WARM) },
> +[21] =	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_AN2235_COLD) },
> +[22] =	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_AN2235_WARM) },
> +[23] =	{ USB_DEVICE(USB_VID_ADSTECH,		USB_PID_ADSTECH_USB2_COLD) },
>  
>  /* device ID with default DIBUSB2_0-firmware and with the hacked firmware */
> -/* 24 */	{ USB_DEVICE(USB_VID_ADSTECH,		USB_PID_ADSTECH_USB2_WARM) },
> -/* 25 */	{ USB_DEVICE(USB_VID_KYE,		USB_PID_KYE_DVB_T_COLD) },
> -/* 26 */	{ USB_DEVICE(USB_VID_KYE,		USB_PID_KYE_DVB_T_WARM) },
> +[24] =	{ USB_DEVICE(USB_VID_ADSTECH,		USB_PID_ADSTECH_USB2_WARM) },
> +[25] =	{ USB_DEVICE(USB_VID_KYE,		USB_PID_KYE_DVB_T_COLD) },
> +[26] =	{ USB_DEVICE(USB_VID_KYE,		USB_PID_KYE_DVB_T_WARM) },
>  
> -/* 27 */	{ USB_DEVICE(USB_VID_KWORLD,		USB_PID_KWORLD_VSTREAM_COLD) },
> +[27] =	{ USB_DEVICE(USB_VID_KWORLD,		USB_PID_KWORLD_VSTREAM_COLD) },
>  
> -/* 28 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_USB2_COLD) },
> -/* 29 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_USB2_WARM) },
> +[28] =	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_USB2_COLD) },
> +[29] =	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_USB2_WARM) },
>  
>  /*
>   * XXX: As Artec just 'forgot' to program the EEPROM on some Artec T1 devices
> @@ -166,7 +166,7 @@ static struct usb_device_id dibusb_dib3000mb_table [] = {
>   */
>  
>  #ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY
> -/* 30 */	{ USB_DEVICE(USB_VID_ANCHOR,		USB_PID_ULTIMA_TVBOX_ANCHOR_COLD) },
> +[30] =	{ USB_DEVICE(USB_VID_ANCHOR,		USB_PID_ULTIMA_TVBOX_ANCHOR_COLD) },
>  #endif
>  
>  			{ }		/* Terminating entry */
> diff --git a/drivers/media/usb/dvb-usb/dibusb-mc.c b/drivers/media/usb/dvb-usb/dibusb-mc.c
> index e2689977c8c8..48760470e821 100644
> --- a/drivers/media/usb/dvb-usb/dibusb-mc.c
> +++ b/drivers/media/usb/dvb-usb/dibusb-mc.c
> @@ -25,23 +25,23 @@ static int dibusb_mc_probe(struct usb_interface *intf,
>  
>  /* do not change the order of the ID table */
>  static struct usb_device_id dibusb_dib3000mc_table [] = {
> -/* 00 */	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3001_COLD) },
> -/* 01 */	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3001_WARM) },
> -/* 02 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_USB2_COLD) },
> -/* 03 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_USB2_WARM) }, // ( ? )
> -/* 04 */	{ USB_DEVICE(USB_VID_LITEON,		USB_PID_LITEON_DVB_T_COLD) },
> -/* 05 */	{ USB_DEVICE(USB_VID_LITEON,		USB_PID_LITEON_DVB_T_WARM) },
> -/* 06 */	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_DIGIVOX_MINI_SL_COLD) },
> -/* 07 */	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_DIGIVOX_MINI_SL_WARM) },
> -/* 08 */	{ USB_DEVICE(USB_VID_GRANDTEC,          USB_PID_GRANDTEC_DVBT_USB2_COLD) },
> -/* 09 */	{ USB_DEVICE(USB_VID_GRANDTEC,          USB_PID_GRANDTEC_DVBT_USB2_WARM) },
> -/* 10 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ARTEC_T14_COLD) },
> -/* 11 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ARTEC_T14_WARM) },
> -/* 12 */	{ USB_DEVICE(USB_VID_LEADTEK,		USB_PID_WINFAST_DTV_DONGLE_COLD) },
> -/* 13 */	{ USB_DEVICE(USB_VID_LEADTEK,		USB_PID_WINFAST_DTV_DONGLE_WARM) },
> -/* 14 */	{ USB_DEVICE(USB_VID_HUMAX_COEX,	USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD) },
> -/* 15 */	{ USB_DEVICE(USB_VID_HUMAX_COEX,	USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM) },
> -			{ }		/* Terminating entry */
> +	[0]  =	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3001_COLD) },
> +	[1]  =	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3001_WARM) },
> +	[2]  =	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_USB2_COLD) },
> +	[3]  =	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_USB2_WARM) }, // ( ? )
> +	[4]  =	{ USB_DEVICE(USB_VID_LITEON,		USB_PID_LITEON_DVB_T_COLD) },
> +	[5]  =	{ USB_DEVICE(USB_VID_LITEON,		USB_PID_LITEON_DVB_T_WARM) },
> +	[6]  =	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_DIGIVOX_MINI_SL_COLD) },
> +	[7]  =	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_DIGIVOX_MINI_SL_WARM) },
> +	[8]  =	{ USB_DEVICE(USB_VID_GRANDTEC,          USB_PID_GRANDTEC_DVBT_USB2_COLD) },
> +	[9]  =	{ USB_DEVICE(USB_VID_GRANDTEC,          USB_PID_GRANDTEC_DVBT_USB2_WARM) },
> +	[10] =	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ARTEC_T14_COLD) },
> +	[11] =	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ARTEC_T14_WARM) },
> +	[12] =	{ USB_DEVICE(USB_VID_LEADTEK,		USB_PID_WINFAST_DTV_DONGLE_COLD) },
> +	[13] =	{ USB_DEVICE(USB_VID_LEADTEK,		USB_PID_WINFAST_DTV_DONGLE_WARM) },
> +	[14] =	{ USB_DEVICE(USB_VID_HUMAX_COEX,	USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD) },
> +	[15] =	{ USB_DEVICE(USB_VID_HUMAX_COEX,	USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM) },
> +			   { }		/* Terminating entry */
>  };
>  MODULE_DEVICE_TABLE (usb, dibusb_dib3000mc_table);
>  



Thanks,
Mauro

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ