netdev - Re: [PATCH RESEND2] net: stmmac: Fix unset max_speed difference between DT and non-DT platforms

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <9fd2c36d-0ac2-357e-23da-9d20397dbb67@linaro.org>
Date:   Fri, 1 Apr 2022 13:29:41 +0100
From:   Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To:     Chen-Yu Tsai <wens@...nel.org>,
        Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>,
        Jose Abreu <joabreu@...opsys.com>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>
Cc:     Chen-Yu Tsai <wens@...e.org>, netdev@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Russell King <rmk+kernel@...linux.org.uk>
Subject: Re: [PATCH RESEND2] net: stmmac: Fix unset max_speed difference
 between DT and non-DT platforms



On 31/03/2022 19:48, Chen-Yu Tsai wrote:
> From: Chen-Yu Tsai <wens@...e.org>
> 
> In commit 9cbadf094d9d ("net: stmmac: support max-speed device tree
> property"), when DT platforms don't set "max-speed", max_speed is set to
> -1; for non-DT platforms, it stays the default 0.
> 
> Prior to commit eeef2f6b9f6e ("net: stmmac: Start adding phylink support"),
> the check for a valid max_speed setting was to check if it was greater
> than zero. This commit got it right, but subsequent patches just checked
> for non-zero, which is incorrect for DT platforms.
> 
> In commit 92c3807b9ac3 ("net: stmmac: convert to phylink_get_linkmodes()")
> the conversion switched completely to checking for non-zero value as a
> valid value, which caused 1000base-T to stop getting advertised by
> default.
> 
> Instead of trying to fix all the checks, simply leave max_speed alone if
> DT property parsing fails.
> 
> Fixes: 9cbadf094d9d ("net: stmmac: support max-speed device tree property")
> Fixes: 92c3807b9ac3 ("net: stmmac: convert to phylink_get_linkmodes()")
> Signed-off-by: Chen-Yu Tsai <wens@...e.org>
> Acked-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
> ---
LGTM,

Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>


--srini
> 
> Resend2: CC Srinivas at Linaro instead of ST. Collected Russell's ack.
> Resend: added Srinivas (author of first fixed commit) to CC list.
> 
> This was first noticed on ROC-RK3399-PC, and also observed on ROC-RK3328-CC.
> The fix was tested on ROC-RK3328-CC and Libre Computer ALL-H5-ALL-CC.
> 
>   drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 3 +--
>   1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> index 5d29f336315b..11e1055e8260 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> @@ -431,8 +431,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
>   	plat->phylink_node = np;
>   
>   	/* Get max speed of operation from device tree */
> -	if (of_property_read_u32(np, "max-speed", &plat->max_speed))
> -		plat->max_speed = -1;
> +	of_property_read_u32(np, "max-speed", &plat->max_speed);
>   
>   	plat->bus_id = of_alias_get_id(np, "ethernet");
>   	if (plat->bus_id < 0)