| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 10 Apr 2022 08:12:22 +0300
From: Ramon Fried <rfried.dev@...il.com>
To: alexandru.tachici@...log.com
Cc: andrew@...n.ch, o.rempel@...gutronix.de, davem@...emloft.net,
devicetree@...r.kernel.org, hkallweit1@...il.com, kuba@...nel.org,
LKML <linux-kernel@...r.kernel.org>, linux@...linux.org.uk,
netdev@...r.kernel.org, robh+dt@...nel.org,
Alexandru Ardelean <alexandru.ardelean@...log.com>
Subject: Re: [PATCH v5 5/7] net: phy: adin1100: Add initial support for
ADIN1100 industrial PHY
On Sun, Apr 10, 2022 at 8:11 AM Ramon Fried <rfried.dev@...il.com> wrote:
>
> On Fri, Mar 25, 2022 at 8:53 PM <alexandru.tachici@...log.com> wrote:
> >
> > From: Alexandru Ardelean <alexandru.ardelean@...log.com>
> >
> > The ADIN1100 is a low power single port 10BASE-T1L transceiver designed for
> > industrial Ethernet applications and is compliant with the IEEE 802.3cg
> > Ethernet standard for long reach 10 Mb/s Single Pair Ethernet.
> >
> > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@...log.com>
> > Signed-off-by: Alexandru Tachici <alexandru.tachici@...log.com>
> > ---
> > drivers/net/phy/Kconfig | 7 ++
> > drivers/net/phy/Makefile | 1 +
> > drivers/net/phy/adin1100.c | 247 +++++++++++++++++++++++++++++++++++++
> > 3 files changed, 255 insertions(+)
> > create mode 100644 drivers/net/phy/adin1100.c
> >
> > diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
> > index ea7571a2b39b..bbbf6c07ea53 100644
> > --- a/drivers/net/phy/Kconfig
> > +++ b/drivers/net/phy/Kconfig
> > @@ -83,6 +83,13 @@ config ADIN_PHY
> > - ADIN1300 - Robust,Industrial, Low Latency 10/100/1000 Gigabit
> > Ethernet PHY
> >
> > +config ADIN1100_PHY
> > + tristate "Analog Devices Industrial Ethernet T1L PHYs"
> > + help
> > + Adds support for the Analog Devices Industrial T1L Ethernet PHYs.
> > + Currently supports the:
> > + - ADIN1100 - Robust,Industrial, Low Power 10BASE-T1L Ethernet PHY
> > +
> > config AQUANTIA_PHY
> > tristate "Aquantia PHYs"
> > help
> > diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
> > index b2728d00fc9a..b82651b57043 100644
> > --- a/drivers/net/phy/Makefile
> > +++ b/drivers/net/phy/Makefile
> > @@ -31,6 +31,7 @@ sfp-obj-$(CONFIG_SFP) += sfp-bus.o
> > obj-y += $(sfp-obj-y) $(sfp-obj-m)
> >
> > obj-$(CONFIG_ADIN_PHY) += adin.o
> > +obj-$(CONFIG_ADIN1100_PHY) += adin1100.o
> > obj-$(CONFIG_AMD_PHY) += amd.o
> > aquantia-objs += aquantia_main.o
> > ifdef CONFIG_HWMON
> > diff --git a/drivers/net/phy/adin1100.c b/drivers/net/phy/adin1100.c
> > new file mode 100644
> > index 000000000000..23d1ae61e0ef
> > --- /dev/null
> > +++ b/drivers/net/phy/adin1100.c
> > @@ -0,0 +1,247 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> > +/*
> > + * Driver for Analog Devices Industrial Ethernet T1L PHYs
> > + *
> > + * Copyright 2020 Analog Devices Inc.
> > + */
> > +#include <linux/kernel.h>
> > +#include <linux/bitfield.h>
> > +#include <linux/delay.h>
> > +#include <linux/errno.h>
> > +#include <linux/init.h>
> > +#include <linux/module.h>
> > +#include <linux/mii.h>
> > +#include <linux/phy.h>
> > +#include <linux/property.h>
> > +
> > +#define PHY_ID_ADIN1100 0x0283bc81
> > +
> > +#define ADIN_FORCED_MODE 0x8000
> > +#define ADIN_FORCED_MODE_EN BIT(0)
> > +
> > +#define ADIN_CRSM_SFT_RST 0x8810
> > +#define ADIN_CRSM_SFT_RST_EN BIT(0)
> > +
> > +#define ADIN_CRSM_SFT_PD_CNTRL 0x8812
> > +#define ADIN_CRSM_SFT_PD_CNTRL_EN BIT(0)
> > +
> > +#define ADIN_AN_PHY_INST_STATUS 0x8030
> > +#define ADIN_IS_CFG_SLV BIT(2)
> > +#define ADIN_IS_CFG_MST BIT(3)
> > +
> > +#define ADIN_CRSM_STAT 0x8818
> > +#define ADIN_CRSM_SFT_PD_RDY BIT(1)
> > +#define ADIN_CRSM_SYS_RDY BIT(0)
> > +
> > +/**
> > + * struct adin_priv - ADIN PHY driver private data
> > + * @tx_level_2v4_able: set if the PHY supports 2.4V TX levels (10BASE-T1L)
> > + * @tx_level_2v4: set if the PHY requests 2.4V TX levels (10BASE-T1L)
> > + * @tx_level_prop_present: set if the TX level is specified in DT
> > + */
> > +struct adin_priv {
> > + unsigned int tx_level_2v4_able:1;
> > + unsigned int tx_level_2v4:1;
> > + unsigned int tx_level_prop_present:1;
> > +};
> > +
> > +static int adin_read_status(struct phy_device *phydev)
> > +{
> > + int ret;
> > +
> > + ret = genphy_c45_read_status(phydev);
> > + if (ret)
> > + return ret;
> > +
> > + ret = phy_read_mmd(phydev, MDIO_MMD_AN, ADIN_AN_PHY_INST_STATUS);
> > + if (ret < 0)
> > + return ret;
> > +
> > + if (ret & ADIN_IS_CFG_SLV)
> > + phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE;
> > +
> > + if (ret & ADIN_IS_CFG_MST)
> > + phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER;
> > +
> > + return 0;
> > +}
> > +
> > +static int adin_config_aneg(struct phy_device *phydev)
> > +{
> > + struct adin_priv *priv = phydev->priv;
> > + int ret;
> > +
> > + if (phydev->autoneg == AUTONEG_DISABLE) {
> > + ret = genphy_c45_pma_setup_forced(phydev);
> > + if (ret < 0)
> > + return ret;
> > +
> > + if (priv->tx_level_prop_present && priv->tx_level_2v4) {
> > + ret = phy_set_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_B10L_PMA_CTRL,
> > + MDIO_PMA_10T1L_CTRL_2V4_EN);
> > + if (ret < 0)
> > + return ret;
> > + } else {
> > + ret = phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_B10L_PMA_CTRL,
> > + MDIO_PMA_10T1L_CTRL_2V4_EN);
> > + if (ret < 0)
> > + return ret;
> > + }
> > +
> > + /* Force PHY to use above configurations */
> > + return phy_set_bits_mmd(phydev, MDIO_MMD_AN, ADIN_FORCED_MODE, ADIN_FORCED_MODE_EN);
> > + }
> > +
> > + ret = phy_clear_bits_mmd(phydev, MDIO_MMD_AN, ADIN_FORCED_MODE, ADIN_FORCED_MODE_EN);
> > + if (ret < 0)
> > + return ret;
> > +
> > + /* Request increased transmit level from LP. */
> > + if (priv->tx_level_prop_present && priv->tx_level_2v4) {
> > + ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_H,
> > + MDIO_AN_T1_ADV_H_10L_TX_HI |
> > + MDIO_AN_T1_ADV_H_10L_TX_HI_REQ);
> > + if (ret < 0)
> > + return ret;
> > + }
> > +
> > + /* Disable 2.4 Vpp transmit level. */
> > + if ((priv->tx_level_prop_present && !priv->tx_level_2v4) || !priv->tx_level_2v4_able) {
> > + ret = phy_clear_bits_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_H,
> > + MDIO_AN_T1_ADV_H_10L_TX_HI |
> > + MDIO_AN_T1_ADV_H_10L_TX_HI_REQ);
> > + if (ret < 0)
> > + return ret;
> > + }
> > +
> > + return genphy_c45_config_aneg(phydev);
> > +}
> > +
> > +static int adin_set_powerdown_mode(struct phy_device *phydev, bool en)
> > +{
> > + int ret;
> > + int val;
> > +
> > + if (en)
> > + val = ADIN_CRSM_SFT_PD_CNTRL_EN;
> > + else
> > + val = 0;
> > +
> > + ret = phy_write_mmd(phydev, MDIO_MMD_VEND1,
> > + ADIN_CRSM_SFT_PD_CNTRL, val);
> > + if (ret < 0)
> > + return ret;
> > +
> > + return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1, ADIN_CRSM_STAT, ret,
> > + (ret & ADIN_CRSM_SFT_PD_RDY) == val,
> > + 1000, 30000, true);
> > +}
> > +
> > +static int adin_suspend(struct phy_device *phydev)
> > +{
> > + return adin_set_powerdown_mode(phydev, true);
> > +}
> > +
> > +static int adin_resume(struct phy_device *phydev)
> > +{
> > + return adin_set_powerdown_mode(phydev, false);
> > +}
> > +
> > +static int adin_set_loopback(struct phy_device *phydev, bool enable)
> > +{
> > + if (enable)
> > + return phy_set_bits_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_10T1L_CTRL,
> > + BMCR_LOOPBACK);
> > +
> > + /* PCS loopback (according to 10BASE-T1L spec) */
> > + return phy_clear_bits_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_10T1L_CTRL,
> > + BMCR_LOOPBACK);
> > +}
> > +
> > +static int adin_soft_reset(struct phy_device *phydev)
> > +{
> > + int ret;
> > +
> > + ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, ADIN_CRSM_SFT_RST, ADIN_CRSM_SFT_RST_EN);
> > + if (ret < 0)
> > + return ret;
> > +
> > + return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1, ADIN_CRSM_STAT, ret,
> > + (ret & ADIN_CRSM_SYS_RDY),
> > + 10000, 30000, true);
> > +}
> > +
> > +static int adin_get_features(struct phy_device *phydev)
> > +{
> > + struct adin_priv *priv = phydev->priv;
> > + struct device *dev = &phydev->mdio.dev;
> > + int ret;
> > + u8 val;
> > +
> > + ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10T1L_STAT);
> > + if (ret < 0)
> > + return ret;
> > +
> > + /* This depends on the voltage level from the power source */
> > + priv->tx_level_2v4_able = !!(ret & MDIO_PMA_10T1L_STAT_2V4_ABLE);
> > +
> > + phydev_dbg(phydev, "PHY supports 2.4V TX level: %s\n",
> > + priv->tx_level_2v4_able ? "yes" : "no");
> > +
> > + priv->tx_level_prop_present = device_property_present(dev, "phy-10base-t1l-2.4vpp");
> > + if (priv->tx_level_prop_present) {
> > + ret = device_property_read_u8(dev, "phy-10base-t1l-2.4vpp", &val);
> > + if (ret < 0)
> > + return ret;
> > +
> > + priv->tx_level_2v4 = val;
> > + if (!priv->tx_level_2v4 && priv->tx_level_2v4_able)
> > + phydev_info(phydev,
> > + "PHY supports 2.4V TX level, but disabled via config\n");
> > + }
> > +
> > + linkmode_set_bit_array(phy_basic_ports_array, ARRAY_SIZE(phy_basic_ports_array),
> > + phydev->supported);
> > +
> > + return genphy_c45_pma_read_abilities(phydev);
> > +}
> > +
> > +static int adin_probe(struct phy_device *phydev)
> > +{
> > + struct device *dev = &phydev->mdio.dev;
> > + struct adin_priv *priv;
> > +
> > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> > + if (!priv)
> > + return -ENOMEM;
> > +
> > + phydev->priv = priv;
> > +
> > + return 0;
> > +}
> > +
> > +static struct phy_driver adin_driver[] = {
> > + {
> > + PHY_ID_MATCH_MODEL(PHY_ID_ADIN1100),
> > + .name = "ADIN1100",
> > + .get_features = adin_get_features,
> > + .soft_reset = adin_soft_reset,
> > + .probe = adin_probe,
> > + .config_aneg = adin_config_aneg,
> > + .read_status = adin_read_status,
> > + .set_loopback = adin_set_loopback,
> > + .suspend = adin_suspend,
> > + .resume = adin_resume,
> > + },
> > +};
> > +
> > +module_phy_driver(adin_driver);
> > +
> > +static struct mdio_device_id __maybe_unused adin_tbl[] = {
> > + { PHY_ID_MATCH_MODEL(PHY_ID_ADIN1100) },
> > + { }
> > +};
> > +
> > +MODULE_DEVICE_TABLE(mdio, adin_tbl);
> > +MODULE_DESCRIPTION("Analog Devices Industrial Ethernet T1L PHY driver");
> > +MODULE_LICENSE("Dual BSD/GPL");
> > --
> > 2.25.1
> >
> Hi.
> Got two submissions for both drivers in parallel.
> https://patchwork.ozlabs.org/project/uboot/patch/20220408162814.227120-1-nate.d@variscite.com/
> are you aware of each other ?
Ignore last mail. I should go to sleep....
Powered by blists - more mailing lists