| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220413072124.119262-1-sumang@marvell.com>
Date: Wed, 13 Apr 2022 12:51:24 +0530
From: Suman Ghosh <sumang@...vell.com>
To: <davem@...emloft.net>, <sgoutham@...vell.com>,
<hkelam@...vell.com>, <sbhatta@...vell.com>, <naveenm@...vell.com>,
<rsaladi2@...vell.com>, <gakula@...vell.com>,
<netdev@...r.kernel.org>
CC: Suman Ghosh <sumang@...vell.com>,
sa_ip-sw-jenkins <sa_ip-sw-jenkins@...vell.com>
Subject: [PATCH] octeontx2-pf: Add support for adaptive interrupt coalescing
Added support for adaptive IRQ coalescing. It uses net_dim
algorithm to find the suitable delay/IRQ count based on the
current packet rate.
Signed-off-by: Suman Ghosh <sumang@...vell.com>
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/kernel/linux/+/73558
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@...vell.com>
Reviewed-by: Sunil Kovvuri Goutham <sgoutham@...vell.com>
---
.../net/ethernet/marvell/octeontx2/Kconfig | 1 +
.../marvell/octeontx2/nic/otx2_common.c | 5 ---
.../marvell/octeontx2/nic/otx2_common.h | 10 +++++
.../marvell/octeontx2/nic/otx2_ethtool.c | 43 ++++++++++++++++---
.../ethernet/marvell/octeontx2/nic/otx2_pf.c | 22 ++++++++++
.../marvell/octeontx2/nic/otx2_txrx.c | 28 ++++++++++++
.../marvell/octeontx2/nic/otx2_txrx.h | 1 +
7 files changed, 99 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/Kconfig b/drivers/net/ethernet/marvell/octeontx2/Kconfig
index 8560f7e463d3..a544733152d8 100644
--- a/drivers/net/ethernet/marvell/octeontx2/Kconfig
+++ b/drivers/net/ethernet/marvell/octeontx2/Kconfig
@@ -30,6 +30,7 @@ config OCTEONTX2_PF
tristate "Marvell OcteonTX2 NIC Physical Function driver"
select OCTEONTX2_MBOX
select NET_DEVLINK
+ select DIMLIB
depends on PCI
help
This driver supports Marvell's OcteonTX2 Resource Virtualization
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
index 033fd79d35b0..c28850d815c2 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
@@ -103,11 +103,6 @@ void otx2_get_dev_stats(struct otx2_nic *pfvf)
{
struct otx2_dev_stats *dev_stats = &pfvf->hw.dev_stats;
-#define OTX2_GET_RX_STATS(reg) \
- otx2_read64(pfvf, NIX_LF_RX_STATX(reg))
-#define OTX2_GET_TX_STATS(reg) \
- otx2_read64(pfvf, NIX_LF_TX_STATX(reg))
-
dev_stats->rx_bytes = OTX2_GET_RX_STATS(RX_OCTS);
dev_stats->rx_drops = OTX2_GET_RX_STATS(RX_DROP);
dev_stats->rx_bcast_frames = OTX2_GET_RX_STATS(RX_BCAST);
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
index d9f4b085b2a4..6abf5c28921f 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
@@ -16,6 +16,7 @@
#include <net/pkt_cls.h>
#include <net/devlink.h>
#include <linux/time64.h>
+#include <linux/dim.h>
#include <mbox.h>
#include <npc.h>
@@ -54,6 +55,11 @@ enum arua_mapped_qtypes {
/* Send skid of 2000 packets required for CQ size of 4K CQEs. */
#define SEND_CQ_SKID 2000
+#define OTX2_GET_RX_STATS(reg) \
+ otx2_read64(pfvf, NIX_LF_RX_STATX(reg))
+#define OTX2_GET_TX_STATS(reg) \
+ otx2_read64(pfvf, NIX_LF_TX_STATX(reg))
+
struct otx2_lmt_info {
u64 lmt_addr;
u16 lmt_id;
@@ -363,6 +369,7 @@ struct otx2_nic {
#define OTX2_FLAG_TC_MATCHALL_INGRESS_ENABLED BIT_ULL(13)
#define OTX2_FLAG_DMACFLTR_SUPPORT BIT_ULL(14)
#define OTX2_FLAG_PTP_ONESTEP_SYNC BIT_ULL(15)
+#define OTX2_FLAG_ADPTV_INT_COAL_ENABLED BIT_ULL(16)
u64 flags;
u64 *cq_op_addr;
@@ -442,6 +449,9 @@ struct otx2_nic {
#endif
/* qos */
struct otx2_qos qos;
+
+ /* napi event count. It is needed for adaptive irq coalescing */
+ u32 napi_events;
};
static inline bool is_otx2_lbkvf(struct pci_dev *pdev)
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
index 72d0b02da3cc..8ed282991f05 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
@@ -477,6 +477,14 @@ static int otx2_get_coalesce(struct net_device *netdev,
cmd->rx_max_coalesced_frames = hw->cq_ecount_wait;
cmd->tx_coalesce_usecs = hw->cq_time_wait;
cmd->tx_max_coalesced_frames = hw->cq_ecount_wait;
+ if ((pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED) ==
+ OTX2_FLAG_ADPTV_INT_COAL_ENABLED) {
+ cmd->use_adaptive_rx_coalesce = 1;
+ cmd->use_adaptive_tx_coalesce = 1;
+ } else {
+ cmd->use_adaptive_rx_coalesce = 0;
+ cmd->use_adaptive_tx_coalesce = 0;
+ }
return 0;
}
@@ -486,10 +494,10 @@ static int otx2_set_coalesce(struct net_device *netdev,
{
struct otx2_nic *pfvf = netdev_priv(netdev);
struct otx2_hw *hw = &pfvf->hw;
+ u8 priv_coalesce_status;
int qidx;
- if (ec->use_adaptive_rx_coalesce || ec->use_adaptive_tx_coalesce ||
- ec->rx_coalesce_usecs_irq || ec->rx_max_coalesced_frames_irq ||
+ if (ec->rx_coalesce_usecs_irq || ec->rx_max_coalesced_frames_irq ||
ec->tx_coalesce_usecs_irq || ec->tx_max_coalesced_frames_irq ||
ec->stats_block_coalesce_usecs || ec->pkt_rate_low ||
ec->rx_coalesce_usecs_low || ec->rx_max_coalesced_frames_low ||
@@ -502,6 +510,18 @@ static int otx2_set_coalesce(struct net_device *netdev,
if (!ec->rx_max_coalesced_frames || !ec->tx_max_coalesced_frames)
return 0;
+ /* Check and update coalesce status */
+ if ((pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED) ==
+ OTX2_FLAG_ADPTV_INT_COAL_ENABLED) {
+ priv_coalesce_status = 1;
+ if (!ec->use_adaptive_rx_coalesce || !ec->use_adaptive_tx_coalesce)
+ pfvf->flags &= ~OTX2_FLAG_ADPTV_INT_COAL_ENABLED;
+ } else {
+ priv_coalesce_status = 0;
+ if (ec->use_adaptive_rx_coalesce || ec->use_adaptive_tx_coalesce)
+ pfvf->flags |= OTX2_FLAG_ADPTV_INT_COAL_ENABLED;
+ }
+
/* 'cq_time_wait' is 8bit and is in multiple of 100ns,
* so clamp the user given value to the range of 1 to 25usec.
*/
@@ -521,13 +541,13 @@ static int otx2_set_coalesce(struct net_device *netdev,
hw->cq_time_wait = min_t(u8, ec->rx_coalesce_usecs,
ec->tx_coalesce_usecs);
- /* Max ecount_wait supported is 16bit,
- * so clamp the user given value to the range of 1 to 64k.
+ /* Max packet budget per napi is 64,
+ * so clamp the user given value to the range of 1 to 64.
*/
ec->rx_max_coalesced_frames = clamp_t(u32, ec->rx_max_coalesced_frames,
- 1, U16_MAX);
+ 1, NAPI_POLL_WEIGHT);
ec->tx_max_coalesced_frames = clamp_t(u32, ec->tx_max_coalesced_frames,
- 1, U16_MAX);
+ 1, NAPI_POLL_WEIGHT);
/* Rx and Tx are mapped to same CQ, check which one
* is changed, if both then choose the min.
@@ -540,6 +560,17 @@ static int otx2_set_coalesce(struct net_device *netdev,
hw->cq_ecount_wait = min_t(u16, ec->rx_max_coalesced_frames,
ec->tx_max_coalesced_frames);
+ /* Reset 'cq_time_wait' and 'cq_ecount_wait' to
+ * default values if coalesce status changed from
+ * 'on' to 'off'.
+ */
+ if (priv_coalesce_status &&
+ ((pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED) !=
+ OTX2_FLAG_ADPTV_INT_COAL_ENABLED)) {
+ hw->cq_time_wait = CQ_TIMER_THRESH_DEFAULT;
+ hw->cq_ecount_wait = CQ_CQE_THRESH_DEFAULT;
+ }
+
if (netif_running(netdev)) {
for (qidx = 0; qidx < pfvf->hw.cint_cnt; qidx++)
otx2_config_irq_coalescing(pfvf, qidx);
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
index f18c9a9a50d0..94aaafbeb365 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -1279,6 +1279,7 @@ static irqreturn_t otx2_cq_intr_handler(int irq, void *cq_irq)
otx2_write64(pf, NIX_LF_CINTX_ENA_W1C(qidx), BIT_ULL(0));
/* Schedule NAPI */
+ pf->napi_events++;
napi_schedule_irqoff(&cq_poll->napi);
return IRQ_HANDLED;
@@ -1292,6 +1293,7 @@ static void otx2_disable_napi(struct otx2_nic *pf)
for (qidx = 0; qidx < pf->hw.cint_cnt; qidx++) {
cq_poll = &qset->napi[qidx];
+ cancel_work_sync(&cq_poll->dim.work);
napi_disable(&cq_poll->napi);
netif_napi_del(&cq_poll->napi);
}
@@ -1538,6 +1540,24 @@ static void otx2_free_hw_resources(struct otx2_nic *pf)
mutex_unlock(&mbox->lock);
}
+static void otx2_dim_work(struct work_struct *w)
+{
+ struct dim_cq_moder cur_moder;
+ struct otx2_cq_poll *cq_poll;
+ struct otx2_nic *pfvf;
+ struct dim *dim;
+
+ dim = container_of(w, struct dim, work);
+ cur_moder = net_dim_get_rx_moderation(dim->mode, dim->profile_ix);
+ cq_poll = container_of(dim, struct otx2_cq_poll, dim);
+ pfvf = (struct otx2_nic *)cq_poll->dev;
+ pfvf->hw.cq_time_wait = (cur_moder.usec > CQ_TIMER_THRESH_MAX) ?
+ CQ_TIMER_THRESH_MAX : cur_moder.usec;
+ pfvf->hw.cq_ecount_wait = (cur_moder.pkts > NAPI_POLL_WEIGHT) ?
+ NAPI_POLL_WEIGHT : cur_moder.pkts;
+ dim->state = DIM_START_MEASURE;
+}
+
int otx2_open(struct net_device *netdev)
{
struct otx2_nic *pf = netdev_priv(netdev);
@@ -1611,6 +1631,8 @@ int otx2_open(struct net_device *netdev)
CINT_INVALID_CQ;
cq_poll->dev = (void *)pf;
+ cq_poll->dim.mode = DIM_CQ_PERIOD_MODE_START_FROM_CQE;
+ INIT_WORK(&cq_poll->dim.work, otx2_dim_work);
netif_napi_add(netdev, &cq_poll->napi,
otx2_napi_handler, NAPI_POLL_WEIGHT);
napi_enable(&cq_poll->napi);
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c
index 459b94b99ddb..927dd12b4f4e 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c
@@ -512,6 +512,22 @@ static int otx2_tx_napi_handler(struct otx2_nic *pfvf,
return 0;
}
+static void otx2_adjust_adaptive_coalese(struct otx2_nic *pfvf, struct otx2_cq_poll *cq_poll)
+{
+ struct dim_sample dim_sample;
+ u64 rx_frames, rx_bytes;
+
+ rx_frames = OTX2_GET_RX_STATS(RX_BCAST) + OTX2_GET_RX_STATS(RX_MCAST) +
+ OTX2_GET_RX_STATS(RX_UCAST);
+ rx_bytes = OTX2_GET_RX_STATS(RX_OCTS);
+ dim_update_sample(pfvf->napi_events,
+ rx_frames,
+ rx_bytes,
+ &dim_sample);
+
+ net_dim(&cq_poll->dim, dim_sample);
+}
+
int otx2_napi_handler(struct napi_struct *napi, int budget)
{
struct otx2_cq_queue *rx_cq = NULL;
@@ -549,6 +565,18 @@ int otx2_napi_handler(struct napi_struct *napi, int budget)
if (pfvf->flags & OTX2_FLAG_INTF_DOWN)
return workdone;
+ /* Check for adaptive interrupt coalesce */
+ if (workdone != 0 &&
+ ((pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED) ==
+ OTX2_FLAG_ADPTV_INT_COAL_ENABLED)) {
+ /* Adjust irq coalese using net_dim */
+ otx2_adjust_adaptive_coalese(pfvf, cq_poll);
+
+ /* Update irq coalescing */
+ for (i = 0; i < pfvf->hw.cint_cnt; i++)
+ otx2_config_irq_coalescing(pfvf, i);
+ }
+
/* Re-enable interrupts */
otx2_write64(pfvf, NIX_LF_CINTX_ENA_W1S(cq_poll->cint_idx),
BIT_ULL(0));
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h
index a2ac2b3bdbf5..ed41a68d3ec6 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h
@@ -107,6 +107,7 @@ struct otx2_cq_poll {
#define CINT_INVALID_CQ 255
u8 cint_idx;
u8 cq_ids[CQS_PER_CINT];
+ struct dim dim;
struct napi_struct napi;
};
--
2.25.1
Powered by blists - more mailing lists