| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 14 Apr 2022 12:19:28 +0200
From: Lorenzo Bianconi <lorenzo@...nel.org>
To: netdev@...r.kernel.org
Cc: nbd@....name, lorenzo.bianconi@...hat.com,
devicetree@...r.kernel.org, robh@...nel.org, davem@...emloft.net,
kuba@...nel.org, pabeni@...hat.com, john@...ozen.org
Subject: [PATCH net-next] dt-bindings: net: mediatek,net: convert to the json-schema
This patch converts the existing mediatek-net.txt binding file
in yaml format.
Signed-off-by: Lorenzo Bianconi <lorenzo@...nel.org>
---
.../devicetree/bindings/net/mediatek,net.yaml | 294 ++++++++++++++++++
.../devicetree/bindings/net/mediatek-net.txt | 108 -------
2 files changed, 294 insertions(+), 108 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/mediatek,net.yaml
delete mode 100644 Documentation/devicetree/bindings/net/mediatek-net.txt
diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml
new file mode 100644
index 000000000000..6c7696a5b8e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml
@@ -0,0 +1,294 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mediatek,net.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Frame Engine Ethernet controller
+
+maintainers:
+ - Lorenzo Bianconi <lorenzo@...nel.org>
+ - Felix Fietkau <nbd@....name>
+
+description:
+ The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs
+ have dual GMAC ports.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt2701-eth
+ - mediatek,mt7623-eth
+ - mediatek,mt7622-eth
+ - mediatek,mt7629-eth
+ - ralink,rt5350-eth
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 3
+ maxItems: 3
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: fe
+ - const: gmac
+ - const: ppe
+
+ mediatek,ethsys:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the syscon node that handles the port setup.
+
+ cci-control-port: true
+
+ mediatek,hifsys:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the mediatek hifsys controller used to provide various clocks
+ and reset to the system.
+
+ dma-coherent: true
+
+ mdio-bus:
+ $ref: mdio.yaml#
+ unevaluatedProperties: false
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+allOf:
+ - $ref: "ethernet-controller.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - mediatek,mt2701-eth
+ - mediatek,mt7623-eth
+ then:
+ properties:
+ clocks:
+ minItems: 4
+ maxItems: 4
+
+ clock-names:
+ additionalItems: false
+ items:
+ - const: ethif
+ - const: esw
+ - const: gp1
+ - const: gp2
+
+ mediatek,pctl:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the syscon node that handles the ports slew rate and
+ driver current.
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt7622-eth
+ then:
+ properties:
+ clocks:
+ minItems: 11
+ maxItems: 11
+
+ clock-names:
+ additionalItems: false
+ items:
+ - const: ethif
+ - const: esw
+ - const: gp0
+ - const: gp1
+ - const: gp2
+ - const: sgmii_tx250m
+ - const: sgmii_rx250m
+ - const: sgmii_cdr_ref
+ - const: sgmii_cdr_fb
+ - const: sgmii_ck
+ - const: eth2pll
+
+ mediatek,sgmiisys:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+ description:
+ A list of phandle to the syscon node that handles the SGMII setup which is required for
+ those SoCs equipped with SGMII.
+
+ mediatek,wed:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ minItems: 2
+ maxItems: 2
+ description:
+ List of phandles to wireless ethernet dispatch nodes.
+
+ mediatek,pcie-mirror:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the mediatek pcie-mirror controller.
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt7629-eth
+ then:
+ properties:
+ clocks:
+ minItems: 17
+ maxItems: 17
+
+ clock-names:
+ additionalItems: false
+ items:
+ - const: ethif
+ - const: sgmiitop
+ - const: esw
+ - const: gp0
+ - const: gp1
+ - const: gp2
+ - const: fe
+ - const: sgmii_tx250m
+ - const: sgmii_rx250m
+ - const: sgmii_cdr_ref
+ - const: sgmii_cdr_fb
+ - const: sgmii2_tx250m
+ - const: sgmii2_rx250m
+ - const: sgmii2_cdr_ref
+ - const: sgmii2_cdr_fb
+ - const: sgmii_ck
+ - const: eth2pll
+
+ mediatek,infracfg:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the syscon node that handles the path from GMAC to
+ PHY variants.
+
+ mediatek,sgmiisys:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 2
+ description:
+ A list of phandle to the syscon node that handles the SGMII setup which is required for
+ those SoCs equipped with SGMII.
+
+patternProperties:
+ "^mac@[0-1]$":
+ type: object
+ additionalProperties: false
+ allOf:
+ - $ref: ethernet-controller.yaml#
+ description:
+ Ethernet MAC node
+ properties:
+ compatible:
+ const: mediatek,eth-mac
+
+ reg:
+ maxItems: 1
+
+ phy-handle: true
+
+ phy-mode: true
+
+ required:
+ - reg
+ - compatible
+ - phy-handle
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+ - mediatek,ethsys
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/mt7622-clk.h>
+ #include <dt-bindings/power/mt7622-power.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ethernet: ethernet@...00000 {
+ compatible = "mediatek,mt7622-eth";
+ reg = <0 0x1b100000 0 0x20000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_ETH_SEL>,
+ <ðsys CLK_ETH_ESW_EN>,
+ <ðsys CLK_ETH_GP0_EN>,
+ <ðsys CLK_ETH_GP1_EN>,
+ <ðsys CLK_ETH_GP2_EN>,
+ <&sgmiisys CLK_SGMII_TX250M_EN>,
+ <&sgmiisys CLK_SGMII_RX250M_EN>,
+ <&sgmiisys CLK_SGMII_CDR_REF>,
+ <&sgmiisys CLK_SGMII_CDR_FB>,
+ <&topckgen CLK_TOP_SGMIIPLL>,
+ <&apmixedsys CLK_APMIXED_ETH2PLL>;
+ clock-names = "ethif", "esw", "gp0", "gp1", "gp2",
+ "sgmii_tx250m", "sgmii_rx250m",
+ "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck",
+ "eth2pll";
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
+ mediatek,ethsys = <ðsys>;
+ mediatek,sgmiisys = <&sgmiisys>;
+ cci-control = <&cci_control2>;
+ mediatek,pcie-mirror = <&pcie_mirror>;
+ mediatek,hifsys = <&hifsys>;
+ dma-coherent;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio0: mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ reg = <0>;
+ };
+
+ gmac1: mac@1 {
+ compatible = "mediatek,eth-mac";
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ reg = <1>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt
deleted file mode 100644
index f18d70189375..000000000000
--- a/Documentation/devicetree/bindings/net/mediatek-net.txt
+++ /dev/null
@@ -1,108 +0,0 @@
-MediaTek Frame Engine Ethernet controller
-=========================================
-
-The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs
-have dual GMAC each represented by a child node..
-
-* Ethernet controller node
-
-Required properties:
-- compatible: Should be
- "mediatek,mt2701-eth": for MT2701 SoC
- "mediatek,mt7623-eth", "mediatek,mt2701-eth": for MT7623 SoC
- "mediatek,mt7622-eth": for MT7622 SoC
- "mediatek,mt7629-eth": for MT7629 SoC
- "ralink,rt5350-eth": for Ralink Rt5350F and MT7628/88 SoC
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the three frame engines interrupts in numeric
- order. These are fe_int0, fe_int1 and fe_int2.
-- clocks: the clock used by the core
-- clock-names: the names of the clock listed in the clocks property. These are
- "ethif", "esw", "gp2", "gp1" : For MT2701 and MT7623 SoC
- "ethif", "esw", "gp0", "gp1", "gp2", "sgmii_tx250m", "sgmii_rx250m",
- "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", "eth2pll" : For MT7622 SoC
- "ethif", "sgmiitop", "esw", "gp0", "gp1", "gp2", "fe", "sgmii_tx250m",
- "sgmii_rx250m", "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii2_tx250m",
- "sgmii2_rx250m", "sgmii2_cdr_ref", "sgmii2_cdr_fb", "sgmii_ck",
- "eth2pll" : For MT7629 SoC.
-- power-domains: phandle to the power domain that the ethernet is part of
-- resets: Should contain phandles to the ethsys reset signals
-- reset-names: Should contain the names of reset signal listed in the resets
- property
- These are "fe", "gmac" and "ppe"
-- mediatek,ethsys: phandle to the syscon node that handles the port setup
-- mediatek,infracfg: phandle to the syscon node that handles the path from
- GMAC to PHY variants, which is required for MT7629 SoC.
-- mediatek,sgmiisys: a list of phandles to the syscon node that handles the
- SGMII setup which is required for those SoCs equipped with SGMII such
- as MT7622 and MT7629 SoC. And MT7622 have only one set of SGMII shared
- by GMAC1 and GMAC2; MT7629 have two independent sets of SGMII directed
- to GMAC1 and GMAC2, respectively.
-- mediatek,pctl: phandle to the syscon node that handles the ports slew rate
- and driver current: only for MT2701 and MT7623 SoC
-
-Optional properties:
-- dma-coherent: present if dma operations are coherent
-- mediatek,cci-control: phandle to the cache coherent interconnect node
-- mediatek,hifsys: phandle to the mediatek hifsys controller used to provide
- various clocks and reset to the system.
-- mediatek,wed: a list of phandles to wireless ethernet dispatch nodes for
- MT7622 SoC.
-- mediatek,pcie-mirror: phandle to the mediatek pcie-mirror controller for
- MT7622 SoC.
-
-* Ethernet MAC node
-
-Required properties:
-- compatible: Should be "mediatek,eth-mac"
-- reg: The number of the MAC
-- phy-handle: see ethernet.txt file in the same directory and
- the phy-mode "trgmii" required being provided when reg
- is equal to 0 and the MAC uses fixed-link to connect
- with internal switch such as MT7530.
-
-Example:
-
-eth: ethernet@...00000 {
- compatible = "mediatek,mt7623-eth";
- reg = <0 0x1b100000 0 0x20000>;
- clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
- <ðsys CLK_ETHSYS_ESW>,
- <ðsys CLK_ETHSYS_GP2>,
- <ðsys CLK_ETHSYS_GP1>;
- clock-names = "ethif", "esw", "gp2", "gp1";
- interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW
- GIC_SPI 199 IRQ_TYPE_LEVEL_LOW
- GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
- resets = <ðsys MT2701_ETHSYS_ETH_RST>;
- reset-names = "eth";
- mediatek,ethsys = <ðsys>;
- mediatek,pctl = <&syscfg_pctl_a>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- gmac1: mac@0 {
- compatible = "mediatek,eth-mac";
- reg = <0>;
- phy-handle = <&phy0>;
- };
-
- gmac2: mac@1 {
- compatible = "mediatek,eth-mac";
- reg = <1>;
- phy-handle = <&phy1>;
- };
-
- mdio-bus {
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "rgmii";
- };
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- phy-mode = "rgmii";
- };
- };
-};
--
2.35.1
Powered by blists - more mailing lists