| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220421144825.GA11810@hoboy.vegasvil.org>
Date: Thu, 21 Apr 2022 07:48:25 -0700
From: Richard Cochran <richardcochran@...il.com>
To: Lasse Johnsen <lasse@...ebeat.app>
Cc: netdev@...r.kernel.org,
Gordon Hollingworth <gordon@...pberrypi.com>,
Ahmad Byagowi <clk@...com>
Subject: Re: Support for IEEE1588 timestamping in the BCM54210PE PHY using
the kernel mii_timestamper interface
On Wed, Apr 20, 2022 at 03:03:26PM +0100, Lasse Johnsen wrote:
> diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> index bd1f419bc47ae..2fa6258103025 100644
> --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
This change is unrelated to the PHY driver and should be in its own
patch series.
> @@ -39,8 +39,11 @@
>
> #include <asm/unaligned.h>
>
> +#include <linux/ptp_classify.h>
> +
> #include "bcmgenet.h"
>
> +
Don't add extra blank lines. As Andrew commented, run your code
through checkpatch.pl and fix the coding style.
> /* Maximum number of hardware queues, downsized if needed */
> #define GENET_MAX_MQ_CNT 4
>
> @@ -2096,7 +2099,18 @@ static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev)
> }
>
> GENET_CB(skb)->last_cb = tx_cb_ptr;
> - skb_tx_timestamp(skb);
> +
> + // Timestamping
> + if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP))
> + {
> + //skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
> + skb_pull(skb, skb_mac_offset(skb)); // Feels like this pull should really be part of ptp_classify_raw...
> + skb_clone_tx_timestamp(skb);
> + }
> + else if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_SW_TSTAMP))
> + {
> + skb_tstamp_tx(skb, NULL);
> + }
This is totally wrong. skb_tx_timestamp() is the correct MAC driver API.
>
> /* Decrement total BD count and advance our write pointer */
> ring->free_bds -= nr_frags + 1;
> diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
> index a13e402074cf8..528192d59d793 100644
> --- a/drivers/net/phy/Makefile
> +++ b/drivers/net/phy/Makefile
> @@ -46,6 +46,7 @@ obj-$(CONFIG_BCM84881_PHY) += bcm84881.o
> obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o
> obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o
> obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o
> +obj-$(CONFIG_BCM54120PE_PHY) += bcm54210pe_ptp.o
> obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
> obj-$(CONFIG_CICADA_PHY) += cicada.o
> obj-$(CONFIG_CORTINA_PHY) += cortina.o
> diff --git a/drivers/net/phy/bcm54210pe_ptp.c b/drivers/net/phy/bcm54210pe_ptp.c
> new file mode 100755
> index 0000000000000..c4882c84229f9
> --- /dev/null
> +++ b/drivers/net/phy/bcm54210pe_ptp.c
> @@ -0,0 +1,1406 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * drivers/net/phy/bcm54210pe_ptp.c
> + *
> + * IEEE1588 (PTP), perout and extts for BCM54210PE PHY
> + *
> + * Authors: Carlos Fernandez, Kyle Judd, Lasse Johnsen
> + * License: GPL
Use the proper MODULE macros for this info.
> + */
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/ip.h>
> +#include <linux/net_tstamp.h>
> +#include <linux/mii.h>
> +#include <linux/phy.h>
> +#include <linux/ptp_classify.h>
> +#include <linux/ptp_clock_kernel.h>
> +#include <linux/udp.h>
> +#include <asm/unaligned.h>
> +#include <linux/brcmphy.h>
> +#include <linux/irq.h>
> +#include <linux/workqueue.h>
> +#include <linux/gpio.h>
> +#include <linux/if_ether.h>
> +#include <linux/delay.h>
> +#include <linux/sched.h>
Suggest keeping include directives in alphabetical order.
> +
> +#include "bcm54210pe_ptp.h"
> +#include "bcm-phy-lib.h"
> +
> +#define PTP_CONTROL_OFFSET 32
> +#define PTP_TSMT_OFFSET 0
> +#define PTP_SEQUENCE_ID_OFFSET 30
> +#define PTP_CLOCK_ID_OFFSET 20
> +#define PTP_CLOCK_ID_SIZE 8
> +#define PTP_SEQUENCE_PORT_NUMER_OFFSET (PTP_CLOCK_ID_OFFSET + PTP_CLOCK_ID_SIZE)
> +
> +#define EXT_SELECT_REG 0x17
> +#define EXT_DATA_REG 0x15
> +
> +#define EXT_ENABLE_REG1 0x17
> +#define EXT_ENABLE_DATA1 0x0F7E
> +#define EXT_ENABLE_REG2 0x15
> +#define EXT_ENABLE_DATA2 0x0000
> +
> +#define EXT_1588_SLICE_REG 0x0810
> +#define EXT_1588_SLICE_DATA 0x0101
EXT_1588_SLICE_DATA is not used anywhere.
> +
> +#define ORIGINAL_TIME_CODE_0 0x0854
> +#define ORIGINAL_TIME_CODE_1 0x0855
> +#define ORIGINAL_TIME_CODE_2 0x0856
> +#define ORIGINAL_TIME_CODE_3 0x0857
> +#define ORIGINAL_TIME_CODE_4 0x0858
> +
> +#define TIME_STAMP_REG_0 0x0889
> +#define TIME_STAMP_REG_1 0x088A
> +#define TIME_STAMP_REG_2 0x088B
> +#define TIME_STAMP_REG_3 0x08C4
> +#define TIME_STAMP_INFO_1 0x088C
> +#define TIME_STAMP_INFO_2 0x088D
> +#define INTERRUPT_STATUS_REG 0x085F
> +#define INTERRUPT_MASK_REG 0x085E
> +#define EXT_SOFTWARE_RESET 0x0F70
> +#define EXT_RESET1 0x0001 //RESET
> +#define EXT_RESET2 0x0000 //NORMAL OPERATION
> +#define GLOBAL_TIMESYNC_REG 0x0FF5
> +
> +#define TX_EVENT_MODE_REG 0x0811
> +#define RX_EVENT_MODE_REG 0x0819
> +#define TX_TSCAPTURE_ENABLE_REG 0x0821
> +#define RX_TSCAPTURE_ENABLE_REG 0x0822
> +#define TXRX_1588_OPTION_REG 0x0823
> +
> +#define TX_TS_OFFSET_LSB 0x0834
> +#define TX_TS_OFFSET_MSB 0x0835
> +#define RX_TS_OFFSET_LSB 0x0844
> +#define RX_TS_OFFSET_MSB 0x0845
> +#define NSE_DPPL_NCO_1_LSB_REG 0x0873
> +#define NSE_DPPL_NCO_1_MSB_REG 0x0874
> +
> +#define NSE_DPPL_NCO_2_0_REG 0x0875
> +#define NSE_DPPL_NCO_2_1_REG 0x0876
> +#define NSE_DPPL_NCO_2_2_REG 0x0877
> +
> +#define NSE_DPPL_NCO_3_0_REG 0x0878
> +#define NSE_DPPL_NCO_3_1_REG 0x0879
> +#define NSE_DPPL_NCO_3_2_REG 0x087A
> +
> +#define NSE_DPPL_NCO_4_REG 0x087B
> +
> +#define NSE_DPPL_NCO_5_0_REG 0x087C
> +#define NSE_DPPL_NCO_5_1_REG 0x087D
> +#define NSE_DPPL_NCO_5_2_REG 0x087E
> +
> +#define NSE_DPPL_NCO_6_REG 0x087F
> +
> +#define NSE_DPPL_NCO_7_0_REG 0x0880
> +#define NSE_DPPL_NCO_7_1_REG 0x0881
> +
> +#define DPLL_SELECT_REG 0x085b
> +#define TIMECODE_SEL_REG 0x08C3
> +#define SHADOW_REG_CONTROL 0x085C
> +#define SHADOW_REG_LOAD 0x085D
> +
> +#define PTP_INTERRUPT_REG 0x0D0C
> +
> +#define CTR_DBG_REG 0x088E
> +#define HEART_BEAT_REG4 0x08ED
> +#define HEART_BEAT_REG3 0x08EC
> +#define HEART_BEAT_REG2 0x0888
> +#define HEART_BEAT_REG1 0x0887
> +#define HEART_BEAT_REG0 0x0886
> +
> +#define READ_END_REG 0x0885
> +
> +static bool bcm54210pe_fetch_timestamp(u8 txrx, u8 message_type, u16 seq_id, struct bcm54210pe_private *private, u64 *timestamp)
> +{
> + struct bcm54210pe_circular_buffer_item *item;
> + struct list_head *this, *next;
> +
> + u8 index = (txrx * 4) + message_type;
> +
> + if(index >= CIRCULAR_BUFFER_COUNT)
> + {
> + return false;
> + }
> +
> + list_for_each_safe(this, next, &private->circular_buffers[index])
> + {
> + item = list_entry(this, struct bcm54210pe_circular_buffer_item, list);
> +
> + if(item->sequence_id == seq_id && item->is_valid)
> + {
> + item->is_valid = false;
Instead of using this flag, just remove matched items from list.
> + *timestamp = item->time_stamp;
> + mutex_unlock(&private->timestamp_buffer_lock);
> + return true;
> + }
> + }
> +
> + return false;
> +}
> +
> +static void bcm54210pe_read_sop_time_register(struct bcm54210pe_private *private)
> +{
> + struct phy_device *phydev = private->phydev;
> + struct bcm54210pe_circular_buffer_item *item;
> + u16 fifo_info_1, fifo_info_2;
> + u8 tx_or_rx, msg_type, index;
> + u16 sequence_id;
> + u64 timestamp;
> + u16 Time[4];
> +
> + mutex_lock(&private->timestamp_buffer_lock);
> +
> + while(bcm_phy_read_exp(phydev, INTERRUPT_STATUS_REG) & 2)
Replace magic number 2 proper macro.
Also, this loop is potentially infinite. Add a sanity check to break out.
> + {
> + mutex_lock(&private->clock_lock);
> +
> + // Flush out the FIFO
> + bcm_phy_write_exp(phydev, READ_END_REG, 1);
> +
> + Time[3] = bcm_phy_read_exp(phydev, TIME_STAMP_REG_3);
> + Time[2] = bcm_phy_read_exp(phydev, TIME_STAMP_REG_2);
> + Time[1] = bcm_phy_read_exp(phydev, TIME_STAMP_REG_1);
> + Time[0] = bcm_phy_read_exp(phydev, TIME_STAMP_REG_0);
> +
> + fifo_info_1 = bcm_phy_read_exp(phydev, TIME_STAMP_INFO_1);
> + fifo_info_2 = bcm_phy_read_exp(phydev, TIME_STAMP_INFO_2);
> +
> + bcm_phy_write_exp(phydev, READ_END_REG, 2);
> + bcm_phy_write_exp(phydev, READ_END_REG, 0);
> +
> + mutex_unlock(&private->clock_lock);
> +
> + msg_type = (u8) ((fifo_info_2 & 0xF000) >> 12);
> + tx_or_rx = (u8) ((fifo_info_2 & 0x0800) >> 11); // 1 = TX, 0 = RX
> + sequence_id = fifo_info_1;
> +
> + timestamp = four_u16_to_ns(Time);
> +
> + index = (tx_or_rx * 4) + msg_type;
> +
> + if(index < CIRCULAR_BUFFER_COUNT)
> + {
> + item = list_first_entry_or_null(&private->circular_buffers[index], struct bcm54210pe_circular_buffer_item, list);
> + }
> +
> + if(item == NULL) {
> + continue;
> + }
> +
> + list_del_init(&item->list);
> +
> + item->msg_type = msg_type;
> + item->sequence_id = sequence_id;
> + item->time_stamp = timestamp;
> + item->is_valid = true;
> +
> + list_add_tail(&item->list, &private->circular_buffers[index]);
> + }
> +
> + mutex_unlock(&private->timestamp_buffer_lock);
> +}
> +
> +static void bcm54210pe_run_rx_timestamp_match_thread(struct work_struct *w)
> +{
> + struct bcm54210pe_private *private =
> + container_of(w, struct bcm54210pe_private, rxts_work);
> +
> + struct skb_shared_hwtstamps *shhwtstamps;
> + struct ptp_header *hdr;
> + struct sk_buff *skb;
> +
> + u8 msg_type;
> + u16 sequence_id;
> + u64 timestamp;
> + int x, type;
> +
> + skb = skb_dequeue(&private->rx_skb_queue);
> +
> + while (skb != NULL) {
> +
> + // Yes.... skb_defer_rx_timestamp just did this but <ZZZzzz>....
> + skb_push(skb, ETH_HLEN);
> + type = ptp_classify_raw(skb);
> + skb_pull(skb, ETH_HLEN);
> +
> + hdr = ptp_parse_header(skb, type);
> +
> + if (hdr == NULL) {
> + goto dequeue;
> + }
> +
> + msg_type = ptp_get_msgtype(hdr, type);
> + sequence_id = be16_to_cpu(hdr->sequence_id);
> +
> + timestamp = 0;
> +
> + for (x = 0; x < 10; x++) {
Ten times? and ...
> + bcm54210pe_read_sop_time_register(private);
> + if (bcm54210pe_fetch_timestamp(0, msg_type, sequence_id,
> + private, ×tamp)) {
> + break;
> + }
> +
> + udelay(private->fib_sequence[x] *
> + private->fib_factor_rx);
with a cute udelay? No, use a proper deferral mechanism.
> + }
> +
> + shhwtstamps = skb_hwtstamps(skb);
> +
> + if (!shhwtstamps) {
> + goto dequeue;
> + }
> +
> + memset(shhwtstamps, 0, sizeof(*shhwtstamps));
> + shhwtstamps->hwtstamp = ns_to_ktime(timestamp);
> +
> + dequeue:
> + netif_rx_ni(skb);
> + skb = skb_dequeue(&private->rx_skb_queue);
> + }
> +}
> +
> +static void bcm54210pe_run_tx_timestamp_match_thread(struct work_struct *w)
> +{
> + struct bcm54210pe_private *private =
> + container_of(w, struct bcm54210pe_private, txts_work);
> +
> + struct skb_shared_hwtstamps *shhwtstamps;
> + struct sk_buff *skb;
> +
> + struct ptp_header *hdr;
> + u8 msg_type;
> + u16 sequence_id;
> + u64 timestamp;
> + int x;
> +
> + timestamp = 0;
> + skb = skb_dequeue(&private->tx_skb_queue);
> +
> + while (skb != NULL) {
> + int type = ptp_classify_raw(skb);
> + hdr = ptp_parse_header(skb, type);
> +
> + if (!hdr) {
> + return;
> + }
> +
> + msg_type = ptp_get_msgtype(hdr, type);
> + sequence_id = be16_to_cpu(hdr->sequence_id);
> +
> + for (x = 0; x < 10; x++) {
> + bcm54210pe_read_sop_time_register(private);
> + if (bcm54210pe_fetch_timestamp(1, msg_type, sequence_id,
> + private, ×tamp)) {
> + break;
> + }
> + udelay(private->fib_sequence[x] * private->fib_factor_tx);
> + }
> + shhwtstamps = skb_hwtstamps(skb);
> +
> + if (!shhwtstamps) {
> + kfree_skb(skb);
> + goto dequeue;
> + }
> +
> + memset(shhwtstamps, 0, sizeof(*shhwtstamps));
> + shhwtstamps->hwtstamp = ns_to_ktime(timestamp);
> +
> + skb_complete_tx_timestamp(skb, shhwtstamps);
> +
> + dequeue:
> + skb = skb_dequeue(&private->tx_skb_queue);
> + }
> +}
> +
> +static int bcm54210pe_config_1588(struct phy_device *phydev)
> +{
> + int err;
> +
> + err = bcm_phy_write_exp(phydev, PTP_INTERRUPT_REG, 0x3c02 );
> +
> + err |= bcm_phy_write_exp(phydev, GLOBAL_TIMESYNC_REG, 0x0001); //Enable global timesync register.
> + err |= bcm_phy_write_exp(phydev, EXT_1588_SLICE_REG, 0x0101); //ENABLE TX and RX slice 1588
Does this device support multiple ports? If so, the driver should
support that.
> + err |= bcm_phy_write_exp(phydev, TX_EVENT_MODE_REG, 0xFF00); //Add 80bit timestamp + NO CPU MODE in TX
> + err |= bcm_phy_write_exp(phydev, RX_EVENT_MODE_REG, 0xFF00); //Add 32+32 bits timestamp + NO CPU mode in RX
> + err |= bcm_phy_write_exp(phydev, TIMECODE_SEL_REG, 0x0101); //Select 80 bit counter
> + err |= bcm_phy_write_exp(phydev, TX_TSCAPTURE_ENABLE_REG, 0x0001); //Enable timestamp capture in TX
> + err |= bcm_phy_write_exp(phydev, RX_TSCAPTURE_ENABLE_REG, 0x0001); //Enable timestamp capture in RX
> +
> + //Enable shadow register
> + err |= bcm_phy_write_exp(phydev, SHADOW_REG_CONTROL, 0x0000);
> + err |= bcm_phy_write_exp(phydev, SHADOW_REG_LOAD, 0x07c0);
> +
> +
> + // Set global mode and trigger immediate framesync to load shaddow registers
> + err |= bcm_phy_write_exp(phydev, NSE_DPPL_NCO_6_REG, 0xC020);
> +
> + //15, 33 or 41 - experimental
> + printk("DEBUG: GPIO %d IRQ %d\n", 15, gpio_to_irq(41));
> +
> + // Enable Interrupt behaviour (eventhough we get no interrupts)
> + err |= bcm54210pe_interrupts_enable(phydev,true, false);
> +
> + return err;
> +}
> +
> +static int bcm54210pe_gettimex(struct ptp_clock_info *info,
> + struct timespec64 *ts,
> + struct ptp_system_timestamp *sts)
> +{
> +
> + struct bcm54210pe_ptp *ptp = container_of(info, struct bcm54210pe_ptp, caps);
> + return bcm54210pe_get80bittime(ptp->chosen, ts, sts);
> +}
> +
> +// Must be called under clock_lock
> +static void bcm54210pe_read80bittime_register(struct phy_device *phydev, u64 *time_stamp_80, u64 *time_stamp_48)
> +{
> + u16 Time[5];
> + u64 ts[3];
> + u64 cumulative;
> +
> + bcm_phy_write_exp(phydev, CTR_DBG_REG, 0x400);
> + Time[4] = bcm_phy_read_exp(phydev, HEART_BEAT_REG4);
> + Time[3] = bcm_phy_read_exp(phydev, HEART_BEAT_REG3);
> + Time[2] = bcm_phy_read_exp(phydev, HEART_BEAT_REG2);
> + Time[1] = bcm_phy_read_exp(phydev, HEART_BEAT_REG1);
> + Time[0] = bcm_phy_read_exp(phydev, HEART_BEAT_REG0);
> +
> + // Set read end bit
> + bcm_phy_write_exp(phydev, CTR_DBG_REG, 0x800);
> + bcm_phy_write_exp(phydev, CTR_DBG_REG, 0x000);
> +
> + *time_stamp_80 = four_u16_to_ns(Time);
> +
> + if (time_stamp_48 != NULL) {
> +
> +
> + ts[2] = (((u64)Time[2]) << 32);
> + ts[1] = (((u64)Time[1]) << 16);
> + ts[0] = ((u64)Time[0]);
> +
> + cumulative = 0;
> + cumulative |= ts[0];
> + cumulative |= ts[1];
> + cumulative |= ts[2];
> +
> + *time_stamp_48 = cumulative;
> + }
> +}
> +
> +// Must be called under clock_lock
> +static void bcm54210pe_read48bittime_register(struct phy_device *phydev, u64 *time_stamp)
> +{
> + u16 Time[3];
> + u64 ts[3];
> + u64 cumulative;
> +
> + bcm_phy_write_exp(phydev, CTR_DBG_REG, 0x400);
> + Time[2] = bcm_phy_read_exp(phydev, HEART_BEAT_REG2);
> + Time[1] = bcm_phy_read_exp(phydev, HEART_BEAT_REG1);
> + Time[0] = bcm_phy_read_exp(phydev, HEART_BEAT_REG0);
> +
> + // Set read end bit
> + bcm_phy_write_exp(phydev, CTR_DBG_REG, 0x800);
> + bcm_phy_write_exp(phydev, CTR_DBG_REG, 0x000);
> +
> +
> + ts[2] = (((u64)Time[2]) << 32);
> + ts[1] = (((u64)Time[1]) << 16);
> + ts[0] = ((u64)Time[0]);
> +
> + cumulative = 0;
> + cumulative |= ts[0];
> + cumulative |= ts[1];
> + cumulative |= ts[2];
> +
> + *time_stamp = cumulative;
> +}
> +
> +static int bcm54210pe_get80bittime(struct bcm54210pe_private *private,
> + struct timespec64 *ts,
> + struct ptp_system_timestamp *sts)
> +{
> + struct phy_device *phydev;
> + u16 nco_6_register_value;
> + int i;
> + u64 time_stamp_48, time_stamp_80, control_ts;
> +
> + phydev = private->phydev;
> +
> + // Capture timestamp on next framesync
> + nco_6_register_value = 0x2000;
> +
> + // Lock
> + mutex_lock(&private->clock_lock);
> +
> + // We share frame sync events with extts, so we need to ensure no event has occurred as we are about to boot the registers, so....
> +
> + // If extts is enabled
> + if (private->extts_en) {
> +
> + // Halt framesyncs generated by the sync in pin
> + bcm_phy_modify_exp(phydev, NSE_DPPL_NCO_6_REG, 0x003C, 0x0000);
> +
> + // Read what's in the 8- bit register
> + bcm54210pe_read48bittime_register(phydev, &control_ts);
> +
> + // If it matches neither the last gettime or extts timestamp
> + if (control_ts != private->last_extts_ts && control_ts != private->last_immediate_ts[0]) { // FIXME: This is a bug
> +
> + // Odds are this is a extts not yet logged as an event
> + //printk("extts triggered by get80bittime\n");
> + bcm54210pe_trigger_extts_event(private, control_ts);
> + }
> + }
> +
> + // Heartbeat register selection. Latch 80 bit Original time coude counter into Heartbeat register
> + // (this is undocumented)
> + bcm_phy_write_exp(phydev, DPLL_SELECT_REG, 0x0040);
> +
> + // Amend to base register
> + nco_6_register_value = bcm54210pe_get_base_nco6_reg(private, nco_6_register_value, false);
> +
> + // Set the NCO register
> + bcm_phy_write_exp(phydev, NSE_DPPL_NCO_6_REG, nco_6_register_value);
> +
> + // Trigger framesync
> + if (sts != NULL) {
> +
> + // If we are doing a gettimex call
> + ptp_read_system_prets(sts);
> + bcm_phy_modify_exp(phydev, NSE_DPPL_NCO_6_REG, 0x003C, 0x0020);
> + ptp_read_system_postts(sts);
> +
> + } else {
> +
> + // or if we are doing a gettime call
> + bcm_phy_modify_exp(phydev, NSE_DPPL_NCO_6_REG, 0x003C, 0x0020);
> + }
> +
> + for (i = 0; i < 5;i++) {
> +
> + bcm54210pe_read80bittime_register(phydev, &time_stamp_80, &time_stamp_48);
> +
> + if (time_stamp_80 != 0) {
> + break;
> + }
> + }
> +
> + // Convert to timespec64
> + ns_to_ts(time_stamp_80, ts);
> +
> + // If we are using extts
> + if(private->extts_en) {
> +
> + // Commit last timestamp
> + private->last_immediate_ts[0] = time_stamp_48;
> + private->last_immediate_ts[1] = time_stamp_80;
> +
> + // Heartbeat register selection. Latch 48 bit Original time coude counter into Heartbeat register
> + // (this is undocumented)
> + bcm_phy_write_exp(phydev, DPLL_SELECT_REG, 0x0000);
> +
> + // Rearm framesync for sync in pin
> + nco_6_register_value = bcm54210pe_get_base_nco6_reg(private, nco_6_register_value, false);
> + bcm_phy_write_exp(phydev, NSE_DPPL_NCO_6_REG, nco_6_register_value);
> + }
> +
> + mutex_unlock(&private->clock_lock);
> +
> + return 0;
> +}
> +
> +static int bcm54210pe_gettime(struct ptp_clock_info *info, struct timespec64 *ts)
> +{
> + int err;
> + err = bcm54210pe_gettimex(info, ts, NULL);
> + return err;
> +}
> +
> +static int bcm54210pe_get48bittime(struct bcm54210pe_private *private, u64 *timestamp)
> +{
> + u16 nco_6_register_value;
> + int i, err;
> +
> + struct phy_device *phydev = private->phydev;
> +
> + // Capture timestamp on next framesync
> + nco_6_register_value = 0x2000;
> +
> + mutex_lock(&private->clock_lock);
> +
> + // Heartbeat register selection. Latch 48 bit Original time coude counter into Heartbeat register
> + // (this is undocumented)
> + err = bcm_phy_write_exp(phydev, DPLL_SELECT_REG, 0x0000);
> +
> + // Amend to base register
> + nco_6_register_value =
> + bcm54210pe_get_base_nco6_reg(private, nco_6_register_value, false);
> +
> + // Set the NCO register
> + err |= bcm_phy_write_exp(phydev, NSE_DPPL_NCO_6_REG, nco_6_register_value);
> +
> + // Trigger framesync
> + err |= bcm_phy_modify_exp(phydev, NSE_DPPL_NCO_6_REG, 0x003C, 0x0020);
> +
> + for (i = 0; i < 5; i++) {
> +
> + bcm54210pe_read48bittime_register(phydev,timestamp);
> +
> + if (*timestamp != 0) {
> + break;
> + }
> + }
> + mutex_unlock(&private->clock_lock);
> +
> + return err;
> +}
> +
> +static int bcm54210pe_settime(struct ptp_clock_info *info, const struct timespec64 *ts)
> +{
> + u16 shadow_load_register, nco_6_register_value;
> + u16 original_time_codes[5], local_time_codes[3];
> + struct bcm54210pe_ptp *ptp;
> + struct phy_device *phydev;
> +
> + ptp = container_of(info, struct bcm54210pe_ptp, caps);
> + phydev = ptp->chosen->phydev;
> +
> + shadow_load_register = 0;
> + nco_6_register_value = 0;
> +
> + // Assign original time codes (80 bit)
> + original_time_codes[4] = (u16) ((ts->tv_sec & 0x0000FFFF00000000) >> 32);
> + original_time_codes[3] = (u16) ((ts->tv_sec & 0x00000000FFFF0000) >> 16);
> + original_time_codes[2] = (u16) (ts->tv_sec & 0x000000000000FFFF);
> + original_time_codes[1] = (u16) ((ts->tv_nsec & 0x00000000FFFF0000) >> 16);
> + original_time_codes[0] = (u16) (ts->tv_nsec & 0x000000000000FFFF);
> +
> + // Assign original time codes (48 bit)
> + local_time_codes[2] = 0x4000;
> + local_time_codes[1] = (u16) (ts->tv_nsec >> 20);
> + local_time_codes[0] = (u16) (ts->tv_nsec >> 4);
> +
> + // Set Time Code load bit in the shadow load register
> + shadow_load_register |= 0x0400;
> +
> + // Set Local Time load bit in the shadow load register
> + shadow_load_register |= 0x0080;
> +
> + mutex_lock(&ptp->chosen->clock_lock);
> +
> + // Write Original Time Code Register
> + bcm_phy_write_exp(phydev, ORIGINAL_TIME_CODE_0, original_time_codes[0]);
> + bcm_phy_write_exp(phydev, ORIGINAL_TIME_CODE_1, original_time_codes[1]);
> + bcm_phy_write_exp(phydev, ORIGINAL_TIME_CODE_2, original_time_codes[2]);
> + bcm_phy_write_exp(phydev, ORIGINAL_TIME_CODE_3, original_time_codes[3]);
> + bcm_phy_write_exp(phydev, ORIGINAL_TIME_CODE_4, original_time_codes[4]);
> +
> + // Write Local Time Code Register
> + bcm_phy_write_exp(phydev, NSE_DPPL_NCO_2_0_REG, local_time_codes[0]);
> + bcm_phy_write_exp(phydev, NSE_DPPL_NCO_2_1_REG, local_time_codes[1]);
> + bcm_phy_write_exp(phydev, NSE_DPPL_NCO_2_2_REG, local_time_codes[2]);
> +
> + // Write Shadow register
> + bcm_phy_write_exp(phydev, SHADOW_REG_CONTROL, 0x0000);
> + bcm_phy_write_exp(phydev, SHADOW_REG_LOAD, shadow_load_register);
> +
> + // Set global mode and nse_init
> + nco_6_register_value = bcm54210pe_get_base_nco6_reg(ptp->chosen, nco_6_register_value, true);
> +
> + // Write to register
> + bcm_phy_write_exp(phydev, NSE_DPPL_NCO_6_REG, nco_6_register_value);
> +
> + // Trigger framesync
> + bcm_phy_modify_exp(phydev, NSE_DPPL_NCO_6_REG, 0x003C, 0x0020);
> +
> + // Set the second on set
> + ptp->chosen->second_on_set = ts->tv_sec;
> +
> + mutex_unlock(&ptp->chosen->clock_lock);
> +
> + return 0;
> +}
> +
> +static int bcm54210pe_adjfine(struct ptp_clock_info *info, long scaled_ppm)
> +{
> + int err;
> + u16 lo, hi;
> + u32 corrected_8ns_interval, base_8ns_interval;
> + bool negative;
> +
> + struct bcm54210pe_ptp *ptp = container_of(info, struct bcm54210pe_ptp, caps);
> + struct phy_device *phydev = ptp->chosen->phydev;
> +
> + negative = false;
> + if ( scaled_ppm < 0 ) {
> + negative = true;
> + scaled_ppm = -scaled_ppm;
> + }
> +
> + // This is not completely accurate but very fast
> + scaled_ppm >>= 7;
> +
> + // Nominal counter increment is 8ns
> + base_8ns_interval = 1 << 31;
> +
> + // Add or subtract differential
> + if (negative) {
> + corrected_8ns_interval = base_8ns_interval - scaled_ppm;
> + } else {
> + corrected_8ns_interval = base_8ns_interval + scaled_ppm;
> + }
> +
> + // Load up registers
> + hi = (corrected_8ns_interval & 0xFFFF0000) >> 16;
> + lo = (corrected_8ns_interval & 0x0000FFFF);
> +
> + mutex_lock(&ptp->chosen->clock_lock);
> +
> + // Set freq_mdio_sel to 1
> + bcm_phy_write_exp(phydev, NSE_DPPL_NCO_2_2_REG, 0x4000);
> +
> + // Load 125MHz frequency reqcntrl
> + bcm_phy_write_exp(phydev, NSE_DPPL_NCO_1_MSB_REG, hi);
> + bcm_phy_write_exp(phydev, NSE_DPPL_NCO_1_LSB_REG, lo);
> +
> + // On next framesync load freq from freqcntrl
> + bcm_phy_write_exp(phydev, SHADOW_REG_LOAD, 0x0040);
> +
> + // Trigger framesync
> + err = bcm_phy_modify_exp(phydev, NSE_DPPL_NCO_6_REG, 0x003C, 0x0020);
> +
> + mutex_unlock(&ptp->chosen->clock_lock);
> +
> + return err;
> +}
> +
> +static int bcm54210pe_adjtime(struct ptp_clock_info *info, s64 delta)
> +{
> + int err;
> + struct timespec64 ts;
> + u64 now;
> +
> + err = bcm54210pe_gettime(info, &ts);
> + if (err < 0)
> + return err;
> +
> + now = ktime_to_ns(timespec64_to_ktime(ts));
> + ts = ns_to_timespec64(now + delta);
> +
> + err = bcm54210pe_settime(info, &ts);
> +
> + return err;
> +}
> +
> +
> +static int bcm54210pe_extts_enable(struct bcm54210pe_private *private, int enable)
> +{
> + int err;
> + struct phy_device *phydev;
> + u16 nco_6_register_value;
> +
> + phydev = private->phydev;
> +
> + if (enable) {
> +
> + if (!private->extts_en) {
> +
> + // Set enable per_out
> + private->extts_en = true;
> + err = bcm_phy_write_exp(phydev, NSE_DPPL_NCO_4_REG, 0x0001);
> +
> + nco_6_register_value = 0;
> + nco_6_register_value = bcm54210pe_get_base_nco6_reg(private, nco_6_register_value, false);
> +
> + err = bcm_phy_write_exp(phydev, NSE_DPPL_NCO_7_0_REG, 0x0100);
> + err = bcm_phy_write_exp(phydev, NSE_DPPL_NCO_7_1_REG, 0x0200);
> + err = bcm_phy_write_exp(phydev, NSE_DPPL_NCO_6_REG, nco_6_register_value);
> +
> + schedule_delayed_work(&private->extts_ws, msecs_to_jiffies(1));
> + }
> +
> + } else {
> + private->extts_en = false;
> + err = bcm_phy_write_exp(phydev, NSE_DPPL_NCO_4_REG, 0x0000);
> +
> + }
> +
> + return err;
> +}
> +
> +static void bcm54210pe_run_extts_thread(struct work_struct *extts_ws)
> +{
> + struct bcm54210pe_private *private;
> + struct phy_device *phydev;
> + u64 interval, time_stamp_48, time_stamp_80;
> +
> + private = container_of((struct delayed_work *)extts_ws, struct bcm54210pe_private, extts_ws);
> + phydev = private->phydev;
> +
> + interval = 10; // in ms - long after we are gone from this earth, discussions will be had and
> + // songs will be sung about whether this interval is short enough....
> + // Before you complain let me say that in Timebeat.app up to ~150ms allows
> + // single digit ns servo accuracy. If your client / servo is not as cool: Do better :-)
> +
> + mutex_lock(&private->clock_lock);
> +
> + bcm54210pe_read80bittime_register(phydev, &time_stamp_80, &time_stamp_48);
> +
> +
> + if (private->last_extts_ts != time_stamp_48 &&
> + private->last_immediate_ts[0] != time_stamp_48 &&
> + private->last_immediate_ts[1] != time_stamp_80) {
> +
> + bcm_phy_write_exp(phydev, NSE_DPPL_NCO_6_REG, 0xE000);
> + bcm54210pe_trigger_extts_event(private, time_stamp_48);
> + bcm_phy_write_exp(phydev, NSE_DPPL_NCO_6_REG, 0xE004);
> + }
> +
> + mutex_unlock(&private->clock_lock);
> +
> + // Do we need to reschedule
> + if (private->extts_en) {
> + schedule_delayed_work(&private->extts_ws, msecs_to_jiffies(interval));
> + }
> +}
> +
> +// Must be called under clock_lock
> +static void bcm54210pe_trigger_extts_event(struct bcm54210pe_private *private, u64 time_stamp)
> +{
> +
> + struct ptp_clock_event event;
> + struct timespec64 ts;
> +
> + event.type = PTP_CLOCK_EXTTS;
> + event.timestamp = convert_48bit_to_80bit(private->second_on_set, time_stamp);
> + event.index = 0;
> +
> + ptp_clock_event(private->ptp->ptp_clock, &event);
> +
> + private->last_extts_ts = time_stamp;
> +
> + ns_to_ts(time_stamp, &ts);
> +}
> +
> +static int bcm54210pe_perout_enable(struct bcm54210pe_private *private, s64 period, s64 pulsewidth, int enable)
> +{
> + struct phy_device *phydev;
> + u16 nco_6_register_value, frequency_hi, frequency_lo, pulsewidth_reg, pulse_start_hi, pulse_start_lo;
> + int err;
> +
> + phydev = private->phydev;
> +
> + if (enable) {
> + frequency_hi = 0;
> + frequency_lo = 0;
> + pulsewidth_reg = 0;
> + pulse_start_hi = 0;
> + pulse_start_lo = 0;
> +
> + // Convert interval pulse spacing (period) and pulsewidth to 8 ns units
> + period /= 8;
> + pulsewidth /= 8;
> +
> + // Mode 2 only: If pulsewidth is not explicitly set with PTP_PEROUT_DUTY_CYCLE
> + if (pulsewidth == 0) {
> + if (period < 2500) {
> + // At a frequency at less than 20us (2500 x 8ns) set pulse length to 1/10th of the interval pulse spacing
> + pulsewidth = period / 10;
> +
> + // Where the interval pulse spacing is short, ensure we set a pulse length of 8ns
> + if (pulsewidth == 0) {
> + pulsewidth = 1;
> + }
> +
> + } else {
> + // Otherwise set pulse with to 4us (8ns x 500 = 4us)
> + pulsewidth = 500;
> + }
> + }
> +
> + if (private->perout_mode == SYNC_OUT_MODE_1) {
> +
> + // Set period
> + private->perout_period = period;
> +
> + if (!private->perout_en) {
> +
> + // Set enable per_out
> + private->perout_en = true;
> + schedule_delayed_work(&private->perout_ws, msecs_to_jiffies(1));
> + }
> +
> + err = 0;
> +
> + } else if (private->perout_mode == SYNC_OUT_MODE_2) {
> +
> + // Set enable per_out
> + private->perout_en = true;
> +
> + // Calculate registers
> + frequency_lo = (u16)period; // Lowest 16 bits of 8ns interval pulse spacing [15:0]
> + frequency_hi = (u16) (0x3FFF & (period >> 16)); // Highest 14 bits of 8ns interval pulse spacing [29:16]
> + frequency_hi |= (u16) pulsewidth << 14; // 2 lowest bits of 8ns pulse length [1:0]
> + pulsewidth_reg = (u16) (0x7F & (pulsewidth >> 2)); // 7 highest bit of 8 ns pulse length [8:2]
> +
> + // Get base value
> + nco_6_register_value = bcm54210pe_get_base_nco6_reg(
> + private, nco_6_register_value, true);
> +
> + mutex_lock(&private->clock_lock);
> +
> + // Write to register
> + err = bcm_phy_write_exp(phydev, NSE_DPPL_NCO_6_REG,
> + nco_6_register_value);
> +
> + // Set sync out pulse interval spacing and pulse length
> + err |= bcm_phy_write_exp(
> + phydev, NSE_DPPL_NCO_3_0_REG, frequency_lo);
> + err |= bcm_phy_write_exp(
> + phydev, NSE_DPPL_NCO_3_1_REG, frequency_hi);
> + err |= bcm_phy_write_exp(phydev,
> + NSE_DPPL_NCO_3_2_REG,
> + pulsewidth_reg);
> +
> + // On next framesync load sync out frequency
> + err |= bcm_phy_write_exp(phydev, SHADOW_REG_LOAD,
> + 0x0200);
> +
> + // Trigger immediate framesync framesync
> + err |= bcm_phy_modify_exp(
> + phydev, NSE_DPPL_NCO_6_REG, 0x003C, 0x0020);
> +
> + mutex_unlock(&private->clock_lock);
> + }
> + } else {
> +
> + // Set disable pps
> + private->perout_en = false;
> +
> + // Get base value
> + nco_6_register_value = bcm54210pe_get_base_nco6_reg(private, nco_6_register_value, false);
> +
> + mutex_lock(&private->clock_lock);
> +
> + // Write to register
> + err = bcm_phy_write_exp(phydev, NSE_DPPL_NCO_6_REG, nco_6_register_value);
> +
> + mutex_unlock(&private->clock_lock);
> + }
> +
> + return err;
> +}
> +
> +static void bcm54210pe_run_perout_mode_one_thread(struct work_struct *perout_ws)
> +{
> + struct bcm54210pe_private *private;
> + u64 local_time_stamp_48bits; //, local_time_stamp_80bits;
> + u64 next_event, time_before_next_pulse, period;
> + u16 nco_6_register_value, pulsewidth_nco3_hack;
> + u64 wait_one, wait_two;
> +
> + private = container_of((struct delayed_work *)perout_ws, struct bcm54210pe_private, perout_ws);
> + period = private->perout_period * 8;
> + pulsewidth_nco3_hack = 250; // The BCM chip is broken. It does not respect this in sync out mode 1
> +
> + nco_6_register_value = 0;
> +
> + // Get base value
> + nco_6_register_value = bcm54210pe_get_base_nco6_reg(private, nco_6_register_value, false);
> +
> + // Get 48 bit local time
> + bcm54210pe_get48bittime(private, &local_time_stamp_48bits);
> +
> + // Calculate time before next event and next event time
> + time_before_next_pulse = period - (local_time_stamp_48bits % period);
> + next_event = local_time_stamp_48bits + time_before_next_pulse;
> +
> + // Lock
> + mutex_lock(&private->clock_lock);
> +
> + // Set pulsewidth (test reveal this does not work), but registers need content or no pulse will exist
> + bcm_phy_write_exp(private->phydev, NSE_DPPL_NCO_3_1_REG, pulsewidth_nco3_hack << 14);
> + bcm_phy_write_exp(private->phydev, NSE_DPPL_NCO_3_2_REG, pulsewidth_nco3_hack >> 2);
> +
> + // Set sync out pulse interval spacing and pulse length
> + bcm_phy_write_exp(private->phydev, NSE_DPPL_NCO_5_0_REG, next_event & 0xFFF0);
> + bcm_phy_write_exp(private->phydev, NSE_DPPL_NCO_5_1_REG, next_event >> 16);
> + bcm_phy_write_exp(private->phydev, NSE_DPPL_NCO_5_2_REG, next_event >> 32);
> +
> + // On next framesync load sync out frequency
> + bcm_phy_write_exp(private->phydev, SHADOW_REG_LOAD, 0x0200);
> +
> + // Write to register with mode one set for sync out
> + bcm_phy_write_exp(private->phydev, NSE_DPPL_NCO_6_REG, nco_6_register_value || 0x0001);
> +
> + // Trigger immediate framesync framesync
> + bcm_phy_modify_exp(private->phydev, NSE_DPPL_NCO_6_REG, 0x003C, 0x0020);
> +
> + // Unlock
> + mutex_unlock(&private->clock_lock);
> +
> + // Wait until 1/10 period after the next pulse
> + wait_one = (time_before_next_pulse / 1000000) + (period / 1000000 / 10);
> + mdelay(wait_one);
> +
> + // Lock
> + mutex_lock(&private->clock_lock);
> +
> + // Clear pulse by bumping sync_out_match to max (this pulls sync out down)
> + bcm_phy_write_exp(private->phydev, NSE_DPPL_NCO_5_0_REG, 0xFFF0);
> + bcm_phy_write_exp(private->phydev, NSE_DPPL_NCO_5_1_REG, 0xFFFF);
> + bcm_phy_write_exp(private->phydev, NSE_DPPL_NCO_5_2_REG, 0xFFFF);
> +
> + // On next framesync load sync out frequency
> + bcm_phy_write_exp(private->phydev, SHADOW_REG_LOAD, 0x0200);
> +
> + // Trigger immediate framesync framesync
> + bcm_phy_modify_exp(private->phydev, NSE_DPPL_NCO_6_REG, 0x003C, 0x0020);
> +
> + // Unlock
> + mutex_unlock(&private->clock_lock);
> +
> + // Calculate wait before we reschedule the next pulse
> + wait_two = (period / 1000000) - (2 * (period / 10000000));
> +
> + // Do we need to reschedule
> + if (private->perout_en) {
> + schedule_delayed_work(&private->perout_ws, msecs_to_jiffies(wait_two));
> + }
> +}
> +
> +
> +bool bcm54210pe_rxtstamp(struct mii_timestamper *mii_ts, struct sk_buff *skb, int type)
> +{
> + struct bcm54210pe_private *private = container_of(mii_ts, struct bcm54210pe_private, mii_ts);
> +
> + if (private->hwts_rx_en) {
> + skb_queue_tail(&private->rx_skb_queue, skb);
This is clunky. The time stamp item may already be in the list. Code
should check the list and deliver the skb immediately on match. Queue
the skb only when time stamp not ready yet.
It appears that time stamps generate an interrupt, no? If so, then
why not use the ISR to trigger reading of time stamps?
See dp83640.c for an example of how to handle asynchronous Rx time stamps.
Moreover: Does this device provide in-band Rx time stamps? If so, why
not use them?
> + schedule_work(&private->rxts_work);
> + return true;
> + }
> +
> + return false;
> +}
> +
> +void bcm54210pe_txtstamp(struct mii_timestamper *mii_ts, struct sk_buff *skb, int type)
> +{
> + struct bcm54210pe_private *private = container_of(mii_ts, struct bcm54210pe_private, mii_ts);
> +
> + switch (private->hwts_tx_en)
> + {
> + case HWTSTAMP_TX_ON:
> + {
> + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
> + skb_queue_tail(&private->tx_skb_queue, skb);
> + schedule_work(&private->txts_work);
> + break;
> + }
> + case HWTSTAMP_TX_OFF:
> + {
> +
> + }
> + default:
> + {
> + kfree_skb(skb);
> + break;
> + }
> + }
> +}
> +
> +int bcm54210pe_ts_info(struct mii_timestamper *mii_ts, struct ethtool_ts_info *info)
> +{
> + struct bcm54210pe_private *bcm54210pe = container_of(mii_ts, struct bcm54210pe_private, mii_ts);
> +
> + info->so_timestamping =
> + SOF_TIMESTAMPING_TX_HARDWARE |
> + SOF_TIMESTAMPING_RX_HARDWARE |
> + SOF_TIMESTAMPING_RAW_HARDWARE;
> +
> + info->phc_index = ptp_clock_index(bcm54210pe->ptp->ptp_clock);
> + info->tx_types =
> + (1 << HWTSTAMP_TX_OFF) |
> + (1 << HWTSTAMP_TX_ON) ;
> + info->rx_filters =
> + (1 << HWTSTAMP_FILTER_NONE) |
> + (1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) |
> + (1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT);
> + return 0;
> +}
> +
> +int bcm54210pe_hwtstamp(struct mii_timestamper *mii_ts, struct ifreq *ifr)
> +{
> + struct bcm54210pe_private *device = container_of(mii_ts, struct bcm54210pe_private, mii_ts);
> +
> + struct hwtstamp_config cfg;
> +
> + if (copy_from_user(&cfg, ifr->ifr_data, sizeof(cfg)))
> + return -EFAULT;
> +
> + if (cfg.flags) /* reserved for future extensions */
> + return -EINVAL;
> +
> + if (cfg.tx_type < 0 || cfg.tx_type > HWTSTAMP_TX_ONESTEP_SYNC)
> + return -ERANGE;
> +
> + device->hwts_tx_en = cfg.tx_type;
> +
> + switch (cfg.rx_filter) {
> + case HWTSTAMP_FILTER_NONE:
> + device->hwts_rx_en = 0;
> + device->layer = 0;
> + device->version = 0;
> + break;
> + case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
> + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
> + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
> + device->hwts_rx_en = 1;
> + device->layer = PTP_CLASS_L4;
> + device->version = PTP_CLASS_V1;
> + cfg.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
> + break;
> + case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
> + case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
> + case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
> + device->hwts_rx_en = 1;
> + device->layer = PTP_CLASS_L4;
> + device->version = PTP_CLASS_V2;
> + cfg.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT;
> + break;
> + case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
> + case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
> + case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
> + device->hwts_rx_en = 1;
> + device->layer = PTP_CLASS_L2;
> + device->version = PTP_CLASS_V2;
> + cfg.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT;
> + break;
> + case HWTSTAMP_FILTER_PTP_V2_EVENT:
> + case HWTSTAMP_FILTER_PTP_V2_SYNC:
> + case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
> + device->hwts_rx_en = 1;
> + device->layer = PTP_CLASS_L4 | PTP_CLASS_L2;
> + device->version = PTP_CLASS_V2;
> + cfg.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
> + break;
> + default:
> + return -ERANGE;
> + }
> +
> + return copy_to_user(ifr->ifr_data, &cfg, sizeof(cfg)) ? -EFAULT : 0;
> +}
> +
> +static int bcm54210pe_feature_enable(struct ptp_clock_info *info, struct ptp_clock_request *req, int on)
> +{
> + struct bcm54210pe_ptp *ptp = container_of(info, struct bcm54210pe_ptp, caps);
> + s64 period, pulsewidth;
> + struct timespec64 ts;
> +
> + switch (req->type) {
> +
> + case PTP_CLK_REQ_PEROUT :
> +
> + period = 0;
> + pulsewidth = 0;
> +
> + // Check if pin func is set correctly
> + if (ptp->chosen->sdp_config[SYNC_OUT_PIN].func != PTP_PF_PEROUT) {
> + return -EOPNOTSUPP;
> + }
> +
> + // No other flags supported
> + if (req->perout.flags & ~PTP_PEROUT_DUTY_CYCLE) {
> + return -EOPNOTSUPP;
> + }
> +
> + // Check if a specific pulsewidth is set
> + if ((req->perout.flags & PTP_PEROUT_DUTY_CYCLE) > 0) {
> +
> + if (ptp->chosen->perout_mode == SYNC_OUT_MODE_1) {
> + return -EOPNOTSUPP;
> + }
> +
> + // Extract pulsewidth
> + ts.tv_sec = req->perout.on.sec;
> + ts.tv_nsec = req->perout.on.nsec;
> + pulsewidth = timespec64_to_ns(&ts);
> +
> + // 9 bits in 8ns units, so max = 4,088ns
> + if (pulsewidth > 511 * 8) {
> + return -ERANGE;
> + }
> + }
> +
> + // Extract pulse spacing interval (period)
> + ts.tv_sec = req->perout.period.sec;
> + ts.tv_nsec = req->perout.period.nsec;
> + period = timespec64_to_ns(&ts);
> +
> + // 16ns is minimum pulse spacing interval (a value of 16 will result in 8ns high followed by 8 ns low)
> + if (period != 0 && period < 16) {
> + return -ERANGE;
> + }
> +
> + return bcm54210pe_perout_enable(ptp->chosen, period, pulsewidth, on);
> +
> + case PTP_CLK_REQ_EXTTS:
> +
> + if (ptp->chosen->sdp_config[SYNC_IN_PIN].func != PTP_PF_EXTTS) {
> + return -EOPNOTSUPP;
> + }
> +
> + return bcm54210pe_extts_enable(ptp->chosen, on);
> +
> + default:
> + break;
> + }
> +
> + return -EOPNOTSUPP;
> +}
> +
> +
> +static int bcm54210pe_ptp_verify_pin(struct ptp_clock_info *info, unsigned int pin,
> + enum ptp_pin_function func, unsigned int chan)
> +{
> + switch (func) {
> + case PTP_PF_NONE:
> + return 0;
> + break;
> + case PTP_PF_EXTTS:
> + if (pin == SYNC_IN_PIN)
> + return 0;
> + break;
> + case PTP_PF_PEROUT:
> + if (pin == SYNC_OUT_PIN)
> + return 0;
> + break;
> + case PTP_PF_PHYSYNC:
> + break;
> + }
> + return -1;
> +}
> +
> +static const struct ptp_clock_info bcm54210pe_clk_caps = {
> + .owner = THIS_MODULE,
> + .name = "BCM54210PE_PHC",
> + .max_adj = 100000000,
> + .n_alarm = 0,
> + .n_pins = 2,
> + .n_ext_ts = 1,
> + .n_per_out = 1,
> + .pps = 0,
> + .adjtime = &bcm54210pe_adjtime,
> + .adjfine = &bcm54210pe_adjfine,
> + .gettime64 = &bcm54210pe_gettime,
> + .gettimex64 = &bcm54210pe_gettimex,
> + .settime64 = &bcm54210pe_settime,
> + .enable = &bcm54210pe_feature_enable,
> + .verify = &bcm54210pe_ptp_verify_pin,
> +};
> +
> +static int bcm54210pe_interrupts_enable(struct phy_device *phydev, bool fsync_en, bool sop_en)
> +{
> + u16 interrupt_mask;
> +
> + interrupt_mask = 0;
> +
> + if (fsync_en) {
> + interrupt_mask |= 0x0001;
> + }
> +
> + if (sop_en) {
> + interrupt_mask |= 0x0002;
> + }
> +
> + return bcm_phy_write_exp(phydev, INTERRUPT_MASK_REG, interrupt_mask);
> +}
> +
> +static int bcm54210pe_sw_reset(struct phy_device *phydev)
> +{
> + u16 err;
> + u16 aux;
> +
> + err = bcm_phy_write_exp(phydev, EXT_SOFTWARE_RESET, EXT_RESET1);
> + err = bcm_phy_read_exp(phydev, EXT_ENABLE_REG1);
> + if (err < 0)
> + return err;
> +
> + err = bcm_phy_write_exp(phydev, EXT_SOFTWARE_RESET, EXT_RESET2);
> + aux = bcm_phy_read_exp(phydev, EXT_SOFTWARE_RESET);
> + return err;
> +}
> +
> +int bcm54210pe_probe(struct phy_device *phydev)
> +{
> + int x, y;
> + struct bcm54210pe_ptp *ptp;
> + struct bcm54210pe_private *bcm54210pe;
> + struct ptp_pin_desc *sync_in_pin_desc, *sync_out_pin_desc;
> +
> + bcm54210pe_sw_reset(phydev);
> + bcm54210pe_config_1588(phydev);
> +
> + bcm54210pe = kzalloc(sizeof(struct bcm54210pe_private), GFP_KERNEL);
> + if (!bcm54210pe) {
> + return -ENOMEM;
> + }
> +
> + ptp = kzalloc(sizeof(struct bcm54210pe_ptp), GFP_KERNEL);
> + if (!ptp) {
> + return -ENOMEM;
> + }
> +
> + bcm54210pe->phydev = phydev;
> + bcm54210pe->ptp = ptp;
> +
> + bcm54210pe->mii_ts.rxtstamp = bcm54210pe_rxtstamp;
> + bcm54210pe->mii_ts.txtstamp = bcm54210pe_txtstamp;
> + bcm54210pe->mii_ts.hwtstamp = bcm54210pe_hwtstamp;
> + bcm54210pe->mii_ts.ts_info = bcm54210pe_ts_info;
> +
> +
> + phydev->mii_ts = &bcm54210pe->mii_ts;
> +
> + // Initialisation of work_structs and similar
> + INIT_WORK(&bcm54210pe->txts_work, bcm54210pe_run_tx_timestamp_match_thread);
> + INIT_WORK(&bcm54210pe->rxts_work, bcm54210pe_run_rx_timestamp_match_thread);
> + INIT_DELAYED_WORK(&bcm54210pe->perout_ws, bcm54210pe_run_perout_mode_one_thread);
> + INIT_DELAYED_WORK(&bcm54210pe->extts_ws, bcm54210pe_run_extts_thread);
Don't use generic work. Instead, implement ptp_clock_info::do_aux_work()
That way, you get a kthread that may be given appropriate scheduling priority.
> +
> + // SKB queues
> + skb_queue_head_init(&bcm54210pe->tx_skb_queue);
> + skb_queue_head_init(&bcm54210pe->rx_skb_queue);
> +
> + for (x = 0; x < CIRCULAR_BUFFER_COUNT; x++)
> + {
> + INIT_LIST_HEAD(&bcm54210pe->circular_buffers[x]);
> +
> + for (y = 0; y < CIRCULAR_BUFFER_ITEM_COUNT; y++)
> + { list_add(&bcm54210pe->circular_buffer_items[x][y].list, &bcm54210pe->circular_buffers[x]); }
> + }
> +
> + // Caps
> + memcpy(&bcm54210pe->ptp->caps, &bcm54210pe_clk_caps, sizeof(bcm54210pe_clk_caps));
> + bcm54210pe->ptp->caps.pin_config = bcm54210pe->sdp_config;
> +
> + // Mutex
> + mutex_init(&bcm54210pe->clock_lock);
> + mutex_init(&bcm54210pe->timestamp_buffer_lock);
> +
> + // Features
> + bcm54210pe->one_step = false;
> + bcm54210pe->extts_en = false;
> + bcm54210pe->perout_en = false;
> + bcm54210pe->perout_mode = SYNC_OUT_MODE_1;
> +
> + // Fibonacci RSewoke style progressive backoff scheme
> + bcm54210pe->fib_sequence[0] = 1;
> + bcm54210pe->fib_sequence[1] = 1;
> + bcm54210pe->fib_sequence[2] = 2;
> + bcm54210pe->fib_sequence[3] = 3;
> + bcm54210pe->fib_sequence[4] = 5;
> + bcm54210pe->fib_sequence[5] = 8;
> + bcm54210pe->fib_sequence[6] = 13;
> + bcm54210pe->fib_sequence[7] = 21;
> + bcm54210pe->fib_sequence[8] = 34;
> + bcm54210pe->fib_sequence[9] = 55;
> +
> + //bcm54210pe->fib_sequence = {1, 1, 2, 3, 5, 8, 13, 21, 34, 55};
> + bcm54210pe->fib_factor_rx = 10;
> + bcm54210pe->fib_factor_tx = 10;
> +
> + // Pin descriptions
> + sync_in_pin_desc = &bcm54210pe->sdp_config[SYNC_IN_PIN];
> + snprintf(sync_in_pin_desc->name, sizeof(sync_in_pin_desc->name), "SYNC_IN");
> + sync_in_pin_desc->index = SYNC_IN_PIN;
> + sync_in_pin_desc->func = PTP_PF_NONE;
> +
> + sync_out_pin_desc = &bcm54210pe->sdp_config[SYNC_OUT_PIN];
> + snprintf(sync_out_pin_desc->name, sizeof(sync_out_pin_desc->name), "SYNC_OUT");
> + sync_out_pin_desc->index = SYNC_OUT_PIN;
> + sync_out_pin_desc->func = PTP_PF_NONE;
> +
> + ptp->chosen = bcm54210pe;
> + phydev->priv = bcm54210pe;
> + ptp->caps.owner = THIS_MODULE;
> +
> + bcm54210pe->ptp->ptp_clock = ptp_clock_register(&bcm54210pe->ptp->caps, &phydev->mdio.dev);
> +
> + if (IS_ERR(bcm54210pe->ptp->ptp_clock)) {
> + return PTR_ERR(bcm54210pe->ptp->ptp_clock);
> + }
> +
> + return 0;
> +}
> +
> +static u16 bcm54210pe_get_base_nco6_reg(struct bcm54210pe_private *private, u16 val, bool do_nse_init)
> +{
> +
> + // Set Global mode to CPU system
> + val |= 0xC000;
> +
> + // NSE init
> + if (do_nse_init) {
> + val |= 0x1000;
> + }
> +
> + if (private->extts_en) {
> + val |= 0x2004;
> + }
> +
> + if(private->perout_en) {
> + if (private->perout_mode == SYNC_OUT_MODE_1) {
> + val |= 0x0001;
> + } else if (private->perout_mode == SYNC_OUT_MODE_2) {
> + val |= 0x0002;
> + }
> + }
> +
> + return val;
> +}
> +
> +
> +static u64 convert_48bit_to_80bit(u64 second_on_set, u64 ts)
> +{
> + return (second_on_set * 1000000000) + ts;
> +}
> +
> +static u64 four_u16_to_ns(u16 *four_u16)
> +{
> + u32 seconds;
> + u32 nanoseconds;
> + struct timespec64 ts;
> + u16 *ptr;
> +
> + nanoseconds = 0;
> + seconds = 0;
> +
> +
> + ptr = (u16 *)&nanoseconds;
> + *ptr = four_u16[0]; ptr++; *ptr = four_u16[1];
> +
> + ptr = (u16 *)&seconds;
> + *ptr = four_u16[2]; ptr++; *ptr = four_u16[3];
> +
> + ts.tv_sec = seconds;
> + ts.tv_nsec = nanoseconds;
> +
> + return ts_to_ns(&ts);
> +}
> +
> +static u64 ts_to_ns(struct timespec64 *ts)
> +{
> + return ((u64)ts->tv_sec * (u64)1000000000) + ts->tv_nsec;
> +}
Use timespec64_to_ns()
> +static void ns_to_ts(u64 time_stamp, struct timespec64 *ts)
> +{
> + ts->tv_sec = ( (u64)time_stamp / (u64)1000000000 );
> + ts->tv_nsec = ( (u64)time_stamp % (u64)1000000000 );
> +}
Use ns_to_timespec64()
> diff --git a/drivers/net/phy/bcm54210pe_ptp.h b/drivers/net/phy/bcm54210pe_ptp.h
> new file mode 100755
> index 0000000000000..483dafc2d4514
> --- /dev/null
> +++ b/drivers/net/phy/bcm54210pe_ptp.h
> @@ -0,0 +1,111 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * drivers/net/phy/bcm54210pe_ptp.h
> + *
> +* IEEE1588 (PTP), perout and extts for BCM54210PE PHY
> + *
> + * Authors: Carlos Fernandez, Kyle Judd, Lasse Johnsen
> + * License: GPL
> + */
> +
> +#include <linux/ptp_clock_kernel.h>
> +#include <linux/list.h>
> +
> +#define CIRCULAR_BUFFER_COUNT 8
> +#define CIRCULAR_BUFFER_ITEM_COUNT 32
> +
> +#define SYNC_IN_PIN 0
> +#define SYNC_OUT_PIN 1
> +
> +#define SYNC_OUT_MODE_1 1
> +#define SYNC_OUT_MODE_2 2
> +
> +#define DIRECTION_RX 0
> +#define DIRECTION_TX 1
> +
> +struct bcm54210pe_ptp {
> + struct ptp_clock_info caps;
> + struct ptp_clock *ptp_clock;
> + struct bcm54210pe_private *chosen;
> +};
> +
> +struct bcm54210pe_circular_buffer_item {
> + struct list_head list;
> +
> + u8 msg_type;
> + u16 sequence_id;
> + u64 time_stamp;
> + bool is_valid;
> +};
> +
> +struct bcm54210pe_private {
> + struct phy_device *phydev;
> + struct bcm54210pe_ptp *ptp;
> + struct mii_timestamper mii_ts;
> + struct ptp_pin_desc sdp_config[2];
> +
> + int ts_tx_config;
> + int tx_rx_filter;
> +
> + bool one_step;
> + bool perout_en;
> + bool extts_en;
> +
> + int second_on_set;
> +
> + int perout_mode;
> + int perout_period;
> + int perout_pulsewidth;
> +
> + u64 last_extts_ts;
> + u64 last_immediate_ts[2];
> +
> + struct sk_buff_head tx_skb_queue;
> + struct sk_buff_head rx_skb_queue;
> +
> + struct bcm54210pe_circular_buffer_item
> + circular_buffer_items[CIRCULAR_BUFFER_COUNT]
> + [CIRCULAR_BUFFER_ITEM_COUNT];
> + struct list_head circular_buffers[CIRCULAR_BUFFER_COUNT];
> +
> + struct work_struct txts_work, rxts_work;
> + struct delayed_work perout_ws, extts_ws;
> + struct mutex clock_lock, timestamp_buffer_lock;
> +
> + int fib_sequence[10];
> +
> + int fib_factor_rx;
> + int fib_factor_tx;
> +
> + int hwts_tx_en;
> + int hwts_rx_en;
> + int layer;
> + int version;
> +};
> +
> +static bool bcm54210pe_rxtstamp(struct mii_timestamper *mii_ts, struct sk_buff *skb, int type);
> +static void bcm54210pe_txtstamp(struct mii_timestamper *mii_ts, struct sk_buff *skb, int type);
> +static void bcm54210pe_run_rx_timestamp_match_thread(struct work_struct *w);
> +static void bcm54210pe_run_tx_timestamp_match_thread(struct work_struct *w);
> +static void bcm54210pe_read_sop_time_register(struct bcm54210pe_private *private);
> +static bool bcm54210pe_fetch_timestamp(u8 txrx, u8 message_type, u16 seq_id, struct bcm54210pe_private *private, u64 *timestamp);
> +
> +static u16 bcm54210pe_get_base_nco6_reg(struct bcm54210pe_private *private, u16 val, bool do_nse_init);
> +static int bcm54210pe_interrupts_enable(struct phy_device *phydev, bool fsync_en, bool sop_en);
> +static int bcm54210pe_gettimex(struct ptp_clock_info *info, struct timespec64 *ts, struct ptp_system_timestamp *sts);
> +static int bcm54210pe_get80bittime(struct bcm54210pe_private *private, struct timespec64 *ts, struct ptp_system_timestamp *sts);
> +static int bcm54210pe_get48bittime(struct bcm54210pe_private *private, u64 *time_stamp);
> +static void bcm54210pe_read80bittime_register(struct phy_device *phydev, u64 *time_stamp_80, u64 *time_stamp_48);
> +static void bcm54210pe_read48bittime_register(struct phy_device *phydev, u64 *time_stamp);
> +
> +static int bcm54210pe_perout_enable(struct bcm54210pe_private *private, s64 period, s64 pulsewidth, int on);
> +static void bcm54210pe_run_perout_mode_one_thread(struct work_struct *perout_ws);
> +
> +static int bcm54210pe_extts_enable(struct bcm54210pe_private *private, int enable);
> +static void bcm54210pe_run_extts_thread(struct work_struct *extts_ws);
> +static void bcm54210pe_trigger_extts_event(struct bcm54210pe_private *private, u64 timestamp);
> +
> +static u64 convert_48bit_to_80bit(u64 second_on_set, u64 ts);
> +static u64 four_u16_to_ns(u16 *four_u16);
> +static u64 ts_to_ns(struct timespec64 *ts);
> +static void ns_to_ts(u64 time_stamp, struct timespec64 *ts);
Never put "static" prototypes into a header file.
Avoid static prototypes altogether. Instead, order the functions
within the source file so that sub-functions appear before their call
sites.
> diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
> index 8b0ac38742d06..c8b79522cf3ad 100644
> --- a/drivers/net/phy/broadcom.c
> +++ b/drivers/net/phy/broadcom.c
> @@ -15,6 +15,11 @@
> #include <linux/phy.h>
> #include <linux/brcmphy.h>
> #include <linux/of.h>
> +#include <linux/irq.h>
> +
> +#if IS_ENABLED (CONFIG_BCM54120PE_PHY)
> +extern int bcm54210pe_probe(struct phy_device *phydev);
> +#endif
>
> #define BRCM_PHY_MODEL(phydev) \
> ((phydev)->drv->phy_id & (phydev)->drv->phy_id_mask)
> @@ -778,7 +783,20 @@ static struct phy_driver broadcom_drivers[] = {
> .config_init = bcm54xx_config_init,
> .ack_interrupt = bcm_phy_ack_intr,
> .config_intr = bcm_phy_config_intr,
> -}, {
> +},
> +
> +#if IS_ENABLED (CONFIG_BCM54120PE_PHY)
> +{
> + .phy_id = PHY_ID_BCM54213PE,
> + .phy_id_mask = 0xffffffff,
> + .name = "Broadcom BCM54210PE",
> + /* PHY_GBIT_FEATURES */
> + .config_init = bcm54xx_config_init,
> + .ack_interrupt = bcm_phy_ack_intr,
> + .config_intr = bcm_phy_config_intr,
> + .probe = bcm54210pe_probe,
> +#elif
> +{
> .phy_id = PHY_ID_BCM54213PE,
> .phy_id_mask = 0xffffffff,
> .name = "Broadcom BCM54213PE",
> @@ -786,6 +804,7 @@ static struct phy_driver broadcom_drivers[] = {
> .config_init = bcm54xx_config_init,
> .ack_interrupt = bcm_phy_ack_intr,
> .config_intr = bcm_phy_config_intr,
> +#endif
> }, {
> .phy_id = PHY_ID_BCM5461,
> .phy_id_mask = 0xfffffff0,
> diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
> index 3e377f3c69e5d..975a62286a9c6 100644
> --- a/drivers/ptp/Kconfig
> +++ b/drivers/ptp/Kconfig
> @@ -87,6 +87,23 @@ config PTP_1588_CLOCK_INES
> core. This clock is only useful if the MII bus of your MAC
> is wired up to the core.
>
> + config BCM54120PE_PHY
> + tristate "Add suport for ptp in bcm54210pe PHYs"
> + depends on NETWORK_PHY_TIMESTAMPING
> + depends on PHYLIB
> + depends on PTP_1588_CLOCK
> + depends on BCM_NET_PHYLIB
> + select NET_PTP_CLASSIFY
> + help
> + This driver adds support for using the BCM54210PE as a PTP
> + clock. This clock is only useful if your PTP programs are
> + getting hardware time stamps on the PTP Ethernet packets
> + using the SO_TIMESTAMPING API.
> +
> + In order for this to work, your MAC driver must also
> + implement the skb_tx_timestamp() function.
> +
> +
> config PTP_1588_CLOCK_PCH
> tristate "Intel PCH EG20T as PTP clock"
> depends on X86_32 || COMPILE_TEST
Powered by blists - more mailing lists