netdev - Re: [PATCH net-next RESEND] net: phy: marvell-88x2222: set proper phydev->port

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 25 Apr 2022 22:33:06 +0100
From:   "Russell King (Oracle)" <linux@...linux.org.uk>
To:     Ivan Bornyakov <i.bornyakov@...rotek.ru>
Cc:     Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org, system@...rotek.ru
Subject: Re: [PATCH net-next RESEND] net: phy: marvell-88x2222: set proper
 phydev->port

On Mon, Apr 25, 2022 at 07:16:37AM +0300, Ivan Bornyakov wrote:
> phydev->port was not set and always reported as PORT_TP.
> Set phydev->port according to inserted SFP module.
> 
> Signed-off-by: Ivan Bornyakov <i.bornyakov@...rotek.ru>
> ---
>  drivers/net/phy/marvell-88x2222.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/net/phy/marvell-88x2222.c b/drivers/net/phy/marvell-88x2222.c
> index ec4f1407a78c..9f971b37ec35 100644
> --- a/drivers/net/phy/marvell-88x2222.c
> +++ b/drivers/net/phy/marvell-88x2222.c
> @@ -603,6 +603,7 @@ static int mv2222_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
>  	dev = &phydev->mdio.dev;
>  
>  	sfp_parse_support(phydev->sfp_bus, id, sfp_supported);
> +	phydev->port = sfp_parse_port(phydev->sfp_bus, id, sfp_supported);
>  	sfp_interface = sfp_select_interface(phydev->sfp_bus, sfp_supported);
>  
>  	dev_info(dev, "%s SFP module inserted\n", phy_modes(sfp_interface));
> @@ -639,6 +640,7 @@ static void mv2222_sfp_remove(void *upstream)
>  
>  	priv->line_interface = PHY_INTERFACE_MODE_NA;
>  	linkmode_zero(priv->supported);
> +	phydev->port = PORT_OTHER;

Can this PHY be used in dual-media mode, auto-switching between copper
and fibre? If so, is PORT_OTHER actually appropriate here, or should
the old value be saved when the module is inserted and restored when
it's removed?

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!