lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Sat, 30 Apr 2022 15:03:43 +0200 From: Frank Wunderlich <linux@...web.de> To: linux-mediatek@...ts.infradead.org, linux-rockchip@...ts.infradead.org Cc: Frank Wunderlich <frank-w@...lic-files.de>, Rob Herring <robh+dt@...nel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Heiko Stuebner <heiko@...ech.de>, Sean Wang <sean.wang@...iatek.com>, Landen Chao <Landen.Chao@...iatek.com>, DENG Qingfang <dqfext@...il.com>, Andrew Lunn <andrew@...n.ch>, Vivien Didelot <vivien.didelot@...il.com>, Florian Fainelli <f.fainelli@...il.com>, Vladimir Oltean <olteanv@...il.com>, "David S. Miller" <davem@...emloft.net>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, Matthias Brugger <matthias.bgg@...il.com>, Peter Geis <pgwipeout@...il.com>, devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org, netdev@...r.kernel.org Subject: [RFC v2 0/4] Support mt7531 on BPI-R2 Pro From: Frank Wunderlich <frank-w@...lic-files.de> This Series add Support for the mt7531 switch on Bananapi R2 Pro board. This board uses port5 of the switch to conect to the gmac0 of the rk3568 SoC. Currently CPU-Port is hardcoded in the mt7530 driver to port 6. Compared to v1 the reset-Patch was dropped as it was not needed and CPU-Port-changes are completely rewriten based on suggestions/code from Vladimir Oltean (many thanks to this). In DTS Patch i only dropped the status-property that was not needed/ignored by driver. Due to the Changes i also made a regression Test on mt7623 bpi-r2 using mt7530 with cpu-port 6. Tests were done directly (ipv4 config on dsa user port) and with vlan-aware bridge including vlan that was tagged outgoing on dsa user port. Frank Wunderlich (4): net: dsa: mt7530: rework mt7530_hw_vlan_{add,del} net: dsa: mt7530: rework mt753[01]_setup net: dsa: mt7530: get cpu-port via dp->cpu_dp instead of constant arm64: dts: rockchip: Add mt7531 dsa node to BPI-R2-Pro board .../boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 48 +++++++++++ drivers/net/dsa/mt7530.c | 81 ++++++++++++------- drivers/net/dsa/mt7530.h | 1 - 3 files changed, 100 insertions(+), 30 deletions(-) -- 2.25.1
Powered by blists - more mailing lists