netdev - Re: [PATCH net-next] net: phy: marvell: update abilities and advertising when switching to SGMII

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <Ym1QUuBjUWKi/k0I@lunn.ch>
Date:   Sat, 30 Apr 2022 17:05:54 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     Robert Hancock <robert.hancock@...ian.com>
Cc:     netdev@...r.kernel.org, hkallweit1@...il.com,
        linux@...linux.org.uk, davem@...emloft.net, kuba@...nel.org,
        pabeni@...hat.com
Subject: Re: [PATCH net-next] net: phy: marvell: update abilities and
 advertising when switching to SGMII

On Wed, Apr 27, 2022 at 01:39:28PM -0600, Robert Hancock wrote:
> With some SFP modules, such as Finisar FCLF8522P2BTL, the PHY hardware
> strapping defaults to 1000BaseX mode, but the kernel prefers to set them
> for SGMII mode. When this happens and the PHY is soft reset, the BMSR
> status register is updated, but this happens after the kernel has already
> read the PHY abilities during probing. This results in support not being
> detected for, and the PHY not advertising support for, 10 and 100 Mbps
> modes, preventing the link from working with a non-gigabit link partner.
> 
> When the PHY is being configured for SGMII mode, call genphy_read_abilities
> again in order to re-read the capabilities, and update the advertising
> field accordingly.
> 
> Signed-off-by: Robert Hancock <robert.hancock@...ian.com>

Reviewed-by: Andrew Lunn <andrew@...n.ch>

    Andrew