Message-Id: <20220502155424.4098917-1-vladimir.oltean@nxp.com>
Date:   Mon,  2 May 2022 18:54:24 +0300
From:   Vladimir Oltean <vladimir.oltean@....com>
To:     netdev@...r.kernel.org
Cc:     Jakub Kicinski <kuba@...nel.org>,
        "David S. Miller" <davem@...emloft.net>,
        Paolo Abeni <pabeni@...hat.com>,
        Eric Dumazet <edumazet@...gle.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Andrew Lunn <andrew@...n.ch>,
        Claudiu Manoil <claudiu.manoil@....com>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>,
        UNGLinuxDriver@...rochip.com, "Y . b . Lu" <yangbo.lu@....com>,
        Xiaoliang Yang <xiaoliang.yang_1@....com>,
        Ido Schimmel <idosch@...dia.com>,
        Petr Machata <petrm@...dia.com>,
        Maxime Chevallier <maxime.chevallier@...tlin.com>,
        Colin Foster <colin.foster@...advantage.com>,
        linux-kselftest@...r.kernel.org, shuah@...nel.org
Subject: [PATCH net-next] selftests: forwarding: add basic QoS classification test for Ocelot switches

Test basic (port-default, VLAN PCP and IP DSCP) QoS classification for
Ocelot switches. Advanced QoS classification using tc filters is covered
by tc_flower_chains.sh in the same directory.

Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
 .../selftests/drivers/net/ocelot/basic_qos.sh | 253 ++++++++++++++++++
 1 file changed, 253 insertions(+)
 create mode 100755 tools/testing/selftests/drivers/net/ocelot/basic_qos.sh

diff --git a/tools/testing/selftests/drivers/net/ocelot/basic_qos.sh b/tools/testing/selftests/drivers/net/ocelot/basic_qos.sh
new file mode 100755
index 000000000000..c51c83421c61
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/ocelot/basic_qos.sh
@@ -0,0 +1,253 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright 2022 NXP
+
+# The script is mostly generic, with the exception of the
+# ethtool per-TC counter names ("rx_green_prio_${tc}")
+
+WAIT_TIME=1
+NUM_NETIFS=4
+STABLE_MAC_ADDRS=yes
+NETIF_CREATE=no
+lib_dir=$(dirname $0)/../../../net/forwarding
+source $lib_dir/tc_common.sh
+source $lib_dir/lib.sh
+
+require_command dcb
+
+h1=${NETIFS[p1]}
+swp1=${NETIFS[p2]}
+swp2=${NETIFS[p3]}
+h2=${NETIFS[p4]}
+
+H1_IPV4="192.0.2.1"
+H2_IPV4="192.0.2.2"
+H1_IPV6="2001:db8:1::1"
+H2_IPV6="2001:db8:1::2"
+
+h1_create()
+{
+	simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64
+}
+
+h1_vlan_create()
+{
+	local vid=$1
+
+	vlan_create $h1 $vid
+	simple_if_init $h1.$vid $H1_IPV4/24 $H1_IPV6/64
+	ip link set $h1.$vid type vlan \
+		egress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 \
+		ingress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
+}
+
+h1_vlan_destroy()
+{
+	local vid=$1
+
+	simple_if_fini $h1.$vid $H1_IPV4/24 $H1_IPV6/64
+	vlan_destroy $h1 $vid
+}
+
+h2_vlan_create()
+{
+	local vid=$1
+
+	vlan_create $h2 $vid
+	simple_if_init $h2.$vid $H2_IPV4/24 $H2_IPV6/64
+	ip link set $h2.$vid type vlan \
+		egress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 \
+		ingress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
+}
+
+h2_vlan_destroy()
+{
+	local vid=$1
+
+	simple_if_fini $h2.$vid $H2_IPV4/24 $H2_IPV6/64
+	vlan_destroy $h2 $vid
+}
+
+vlans_prepare()
+{
+	h1_vlan_create 100
+	h2_vlan_create 100
+
+	tc qdisc add dev ${h1}.100 clsact
+	tc filter add dev ${h1}.100 egress protocol ipv4 \
+		flower ip_proto icmp action skbedit priority 3
+	tc filter add dev ${h1}.100 egress protocol ipv6 \
+		flower ip_proto icmpv6 action skbedit priority 3
+}
+
+vlans_destroy()
+{
+	tc qdisc del dev ${h1}.100 clsact
+
+	h1_vlan_destroy 100
+	h2_vlan_destroy 100
+}
+
+switch_create()
+{
+	ip link set ${swp1} up
+	ip link set ${swp2} up
+
+	# Ports should trust VLAN PCP even with vlan_filtering=0
+	ip link add br0 type bridge
+	ip link set ${swp1} master br0
+	ip link set ${swp2} master br0
+	ip link set br0 up
+}
+
+switch_destroy()
+{
+	ip link del br0
+}
+
+setup_prepare()
+{
+	vrf_prepare
+
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	h2_destroy
+	h1_destroy
+	switch_destroy
+
+	vrf_cleanup
+}
+
+dscp_cs_to_tos()
+{
+	local dscp_cs=$1
+
+	# https://datatracker.ietf.org/doc/html/rfc2474
+	# 4.2.2.1  The Class Selector Codepoints
+	echo $((${dscp_cs} << 5))
+}
+
+run_test()
+{
+	local test_name=$1; shift
+	local if_name=$1; shift
+	local tc=$1; shift
+	local tos=$1; shift
+	local counter_name="rx_green_prio_${tc}"
+	local ipv4_before
+	local ipv4_after
+	local ipv6_before
+	local ipv6_after
+
+	ipv4_before=$(ethtool_stats_get ${swp1} "${counter_name}")
+	ping_do ${if_name} $H2_IPV4 "-Q ${tos}"
+	ipv4_after=$(ethtool_stats_get ${swp1} "${counter_name}")
+
+	if [ $((${ipv4_after} - ${ipv4_before})) -lt ${PING_COUNT} ]; then
+		RET=1
+	else
+		RET=0
+	fi
+	log_test "IPv4 ${test_name}"
+
+	ipv6_before=$(ethtool_stats_get ${swp1} "${counter_name}")
+	ping_do ${if_name} $H2_IPV6 "-Q ${tos}"
+	ipv6_after=$(ethtool_stats_get ${swp1} "${counter_name}")
+
+	if [ $((${ipv6_after} - ${ipv6_before})) -lt ${PING_COUNT} ]; then
+		RET=1
+	else
+		RET=0
+	fi
+	log_test "IPv6 ${test_name}"
+}
+
+port_default_prio_get()
+{
+	local if_name=$1
+	local prio
+
+	prio="$(dcb -j app show dev ${if_name} default-prio | \
+		jq '.default_prio[]')"
+	if [ -z "${prio}" ]; then
+		prio=0
+	fi
+
+	echo ${prio}
+}
+
+test_port_default()
+{
+	local orig=$(port_default_prio_get ${swp1})
+	local dmac=$(mac_get ${h2})
+
+	dcb app replace dev ${swp1} default-prio 5
+
+	run_test "Port-default QoS classification" ${h1} 5 0
+
+	dcb app replace dev ${swp1} default-prio ${orig}
+}
+
+test_vlan_pcp()
+{
+	vlans_prepare
+
+	run_test "Trusted VLAN PCP QoS classification" ${h1}.100 3 0
+
+	vlans_destroy
+}
+
+test_ip_dscp()
+{
+	local port_default=$(port_default_prio_get ${swp1})
+	local tos=$(dscp_cs_to_tos 4)
+
+	dcb app add dev ${swp1} dscp-prio CS4:4
+	run_test "Trusted DSCP QoS classification" ${h1} 4 ${tos}
+	dcb app del dev ${swp1} dscp-prio CS4:4
+
+	vlans_prepare
+	run_test "Untrusted DSCP QoS classification follows VLAN PCP" \
+		${h1}.100 3 ${tos}
+	vlans_destroy
+
+	run_test "Untrusted DSCP QoS classification follows port default" \
+		${h1} ${port_default} ${tos}
+}
+
+trap cleanup EXIT
+
+ALL_TESTS="
+	test_port_default
+	test_vlan_pcp
+	test_ip_dscp
+"
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
-- 
2.25.1

Powered by blists - more mailing lists