[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <cover.1651647576.git.hakan.jansson@infineon.com>
Date: Wed, 4 May 2022 11:03:38 +0200
From: Hakan Jansson <hakan.jansson@...ineon.com>
To: unlisted-recipients:; (no To-header on input)
CC: Hakan Jansson <hakan.jansson@...ineon.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Linus Walleij <linus.walleij@...aro.org>,
<netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
Marcel Holtmann <marcel@...tmann.org>,
Johan Hedberg <johan.hedberg@...il.com>,
"Luiz Augusto von Dentz" <luiz.dentz@...il.com>,
<linux-bluetooth@...r.kernel.org>
Subject: [PATCH 0/2] Bluetooth: hci_bcm: Autobaud mode support
Some devices (e.g. CYW5557x) require autobaud mode to enable FW loading.
Autobaud mode can also be required on some boards where the controller device
is using a non-standard baud rate when first powered on.
Only a limited subset of HCI commands are supported in autobaud mode.
These patches add a DT property, "brcm,uses-autobaud-mode", to control autobaud
mode selection.
Hakan Jansson (2):
dt-bindings: net: broadcom-bluetooth: Add property for autobaud mode
Bluetooth: hci_bcm: Add support for FW loading in autobaud mode
.../bindings/net/broadcom-bluetooth.yaml | 7 +++++
drivers/bluetooth/btbcm.c | 31 ++++++++++++++-----
drivers/bluetooth/btbcm.h | 8 ++---
drivers/bluetooth/hci_bcm.c | 15 +++++++--
4 files changed, 46 insertions(+), 15 deletions(-)
base-commit: 48b57999e38745b707abe233019786cc097df3c9
--
2.25.1
Powered by blists - more mailing lists