netdev - [net-next 01/15] net/mlx5: Add exit route when waiting for FW

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220510055743.118828-2-saeedm@nvidia.com>
Date:   Mon,  9 May 2022 22:57:29 -0700
From:   Saeed Mahameed <saeedm@...dia.com>
To:     "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>
Cc:     netdev@...r.kernel.org, Gavin Li <gavinl@...dia.com>,
        Moshe Shemesh <moshe@...dia.com>,
        Saeed Mahameed <saeedm@...dia.com>
Subject: [net-next 01/15] net/mlx5: Add exit route when waiting for FW

From: Gavin Li <gavinl@...dia.com>

Currently, removing a device needs to get the driver interface lock before
doing any cleanup. If the driver is waiting in a loop for FW init, there
is no way to cancel the wait, instead the device cleanup waits for the
loop to conclude and release the lock.

To allow immediate response to remove device commands, check the TEARDOWN
flag while waiting for FW init, and exit the loop if it has been set.

Signed-off-by: Gavin Li <gavinl@...dia.com>
Reviewed-by: Moshe Shemesh <moshe@...dia.com>
Signed-off-by: Saeed Mahameed <saeedm@...dia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/main.c | 5 ++++-
 include/linux/mlx5/driver.h                    | 1 +
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index 35e48ef04845..f28a3526aafa 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -189,7 +189,8 @@ static int wait_fw_init(struct mlx5_core_dev *dev, u32 max_wait_mili,
 		fw_initializing = ioread32be(&dev->iseg->initializing);
 		if (!(fw_initializing >> 31))
 			break;
-		if (time_after(jiffies, end)) {
+		if (time_after(jiffies, end) ||
+		    test_and_clear_bit(MLX5_BREAK_FW_WAIT, &dev->intf_state)) {
 			err = -EBUSY;
 			break;
 		}
@@ -1602,6 +1603,7 @@ static void remove_one(struct pci_dev *pdev)
 	struct mlx5_core_dev *dev  = pci_get_drvdata(pdev);
 	struct devlink *devlink = priv_to_devlink(dev);
 
+	set_bit(MLX5_BREAK_FW_WAIT, &dev->intf_state);
 	devlink_unregister(devlink);
 	mlx5_sriov_disable(pdev);
 	mlx5_crdump_disable(dev);
@@ -1785,6 +1787,7 @@ static void shutdown(struct pci_dev *pdev)
 	int err;
 
 	mlx5_core_info(dev, "Shutdown was called\n");
+	set_bit(MLX5_BREAK_FW_WAIT, &dev->intf_state);
 	err = mlx5_try_fast_unload(dev);
 	if (err)
 		mlx5_unload_one(dev);
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index ff47d49d8be4..f327d0544038 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -632,6 +632,7 @@ enum mlx5_device_state {
 
 enum mlx5_interface_state {
 	MLX5_INTERFACE_STATE_UP = BIT(0),
+	MLX5_BREAK_FW_WAIT = BIT(1),
 };
 
 enum mlx5_pci_status {
-- 
2.35.1