netdev - [PATCH v2] net: phy: marvell: Add errata section 5.1 for Alaska PHY

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220516070859.549170-1-sr@denx.de>
Date:   Mon, 16 May 2022 09:08:59 +0200
From:   Stefan Roese <sr@...x.de>
To:     netdev@...r.kernel.org
Cc:     Leszek Polak <lpolak@...i.de>,
        Marek Behún <kabel@...nel.org>,
        Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        "David S . Miller" <davem@...emloft.net>
Subject: [PATCH v2] net: phy: marvell: Add errata section 5.1 for Alaska PHY

From: Leszek Polak <lpolak@...i.de>

As per Errata Section 5.1, if EEE is intended to be used, some register
writes must be done once after every hardware reset. This patch now adds
the necessary register writes as listed in the Marvell errata.

Without this fix we experience ethernet problems on some of our boards
equipped with a new version of this ethernet PHY (different supplier).

The fix applies to Marvell Alaska 88E1510/88E1518/88E1512/88E1514
Rev. A0.

Signed-off-by: Leszek Polak <lpolak@...i.de>
Signed-off-by: Stefan Roese <sr@...x.de>
Cc: Marek Behún <kabel@...nel.org>
Cc: Andrew Lunn <andrew@...n.ch>
Cc: Heiner Kallweit <hkallweit1@...il.com>
Cc: Russell King <linux@...linux.org.uk>
Cc: David S. Miller <davem@...emloft.net>
---
v2:
- Implement struct with errata reg values and loop over this
  struct instead of using single phy_write() call for each PHY
  reg value, as suggested by Marek

 drivers/net/phy/marvell.c | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 2702faf7b0f6..41353f615a66 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1177,7 +1177,44 @@ static int m88e1318_config_init(struct phy_device *phydev)
 
 static int m88e1510_config_init(struct phy_device *phydev)
 {
+	static const struct {
+		u16 reg17, reg16;
+	} errata_vals[] = {
+		{ 0x214b, 0x2144 },
+		{ 0x0c28, 0x2146 },
+		{ 0xb233, 0x214d },
+		{ 0xcc0c, 0x2159 },
+	};
 	int err;
+	int i;
+
+	/* As per Marvell Release Notes - Alaska 88E1510/88E1518/88E1512/
+	 * 88E1514 Rev A0, Errata Section 5.1:
+	 * If EEE is intended to be used, the following register writes
+	 * must be done once after every hardware reset.
+	 */
+	err = marvell_set_page(phydev, 0x00FF);
+	if (err < 0)
+		return err;
+
+	for (i = 0; i < ARRAY_SIZE(errata_vals); ++i) {
+		err = phy_write(phydev, 17, errata_vals[i].reg17);
+		if (err)
+			return err;
+		err = phy_write(phydev, 16, errata_vals[i].reg16);
+		if (err)
+			return err;
+	}
+
+	err = marvell_set_page(phydev, 0x00FB);
+	if (err < 0)
+		return err;
+	err = phy_write(phydev, 07, 0xC00D);
+	if (err < 0)
+		return err;
+	err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
+	if (err < 0)
+		return err;
 
 	/* SGMII-to-Copper mode initialization */
 	if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
-- 
2.36.1