lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220527182424.621275-1-simon.horman@corigine.com>
Date:   Fri, 27 May 2022 20:24:24 +0200
From:   Simon Horman <simon.horman@...igine.com>
To:     David Miller <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>
Cc:     netdev@...r.kernel.org, oss-drivers@...igine.com,
        Yu Xiao <yu.xiao@...igine.com>,
        Simon Horman <simon.horman@...igine.com>
Subject: [PATCH net] nfp: only report pause frame configuration for physical device

From: Yu Xiao <yu.xiao@...igine.com>

Only report pause frame configuration for physical device. Logical
port of both PCI PF and PCI VF do not support it.

Fixes: 9fdc5d85a8fe ("nfp: update ethtool reporting of pauseframe control")
Signed-off-by: Yu Xiao <yu.xiao@...igine.com>
Signed-off-by: Simon Horman <simon.horman@...igine.com>
---
 drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c
index 61c8b450aafb..df0afd271a21 100644
--- a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c
+++ b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c
@@ -289,8 +289,6 @@ nfp_net_get_link_ksettings(struct net_device *netdev,
 
 	/* Init to unknowns */
 	ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE);
-	ethtool_link_ksettings_add_link_mode(cmd, supported, Pause);
-	ethtool_link_ksettings_add_link_mode(cmd, advertising, Pause);
 	cmd->base.port = PORT_OTHER;
 	cmd->base.speed = SPEED_UNKNOWN;
 	cmd->base.duplex = DUPLEX_UNKNOWN;
@@ -298,6 +296,8 @@ nfp_net_get_link_ksettings(struct net_device *netdev,
 	port = nfp_port_from_netdev(netdev);
 	eth_port = nfp_port_get_eth_port(port);
 	if (eth_port) {
+		ethtool_link_ksettings_add_link_mode(cmd, supported, Pause);
+		ethtool_link_ksettings_add_link_mode(cmd, advertising, Pause);
 		cmd->base.autoneg = eth_port->aneg != NFP_ANEG_DISABLED ?
 			AUTONEG_ENABLE : AUTONEG_DISABLE;
 		nfp_net_set_fec_link_mode(eth_port, cmd);
-- 
2.30.2

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ