| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220530104257.21485-11-arun.ramadoss@microchip.com>
Date: Mon, 30 May 2022 16:12:52 +0530
From: Arun Ramadoss <arun.ramadoss@...rochip.com>
To: <linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>
CC: Woojung Huh <woojung.huh@...rochip.com>,
<UNGLinuxDriver@...rochip.com>, Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
"Russell King" <linux@...linux.org.uk>
Subject: [RFC Patch net-next v2 10/15] net: dsa: microchip: move the setup, get_phy_flags & mtu to ksz_common
This patch assigns the .setup, get_phy_flags & mtu hook of ksz8795 and
ksz9477 in dsa_switch_ops to ksz_common. And the individual switches
setup implementations are called based on the ksz_dev_ops. For
get_phy_flags hooks,checks whether the chip is ksz8863/kss8793 then it
returns error for port1.
Signed-off-by: Arun Ramadoss <arun.ramadoss@...rochip.com>
---
drivers/net/dsa/microchip/ksz8795.c | 17 ++-------
drivers/net/dsa/microchip/ksz9477.c | 14 ++++----
drivers/net/dsa/microchip/ksz_common.c | 50 ++++++++++++++++++++++++++
drivers/net/dsa/microchip/ksz_common.h | 7 ++++
4 files changed, 68 insertions(+), 20 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 528de481b319..1058b6883caa 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -898,18 +898,6 @@ static void ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
}
}
-static u32 ksz8_sw_get_phy_flags(struct dsa_switch *ds, int port)
-{
- /* Silicon Errata Sheet (DS80000830A):
- * Port 1 does not work with LinkMD Cable-Testing.
- * Port 1 does not respond to received PAUSE control frames.
- */
- if (!port)
- return MICREL_KSZ8_P1_ERRATA;
-
- return 0;
-}
-
static void ksz8_cfg_port_member(struct ksz_device *dev, int port, u8 member)
{
u8 data;
@@ -1476,8 +1464,8 @@ static void ksz8_get_caps(struct ksz_device *dev, int port,
static const struct dsa_switch_ops ksz8_switch_ops = {
.get_tag_protocol = ksz_get_tag_protocol,
- .get_phy_flags = ksz8_sw_get_phy_flags,
- .setup = ksz8_setup,
+ .get_phy_flags = ksz_get_phy_flags,
+ .setup = ksz_setup,
.phy_read = ksz_phy_read16,
.phy_write = ksz_phy_write16,
.phylink_get_caps = ksz_phylink_get_caps,
@@ -1544,6 +1532,7 @@ static void ksz8_switch_exit(struct ksz_device *dev)
}
static const struct ksz_dev_ops ksz8_dev_ops = {
+ .setup = ksz8_setup,
.get_port_addr = ksz8_get_port_addr,
.cfg_port_member = ksz8_cfg_port_member,
.flush_dyn_mac_table = ksz8_flush_dyn_mac_table,
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index d70e0c32b309..d7474d9d4384 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -47,9 +47,8 @@ static void ksz9477_port_cfg32(struct ksz_device *dev, int port, int offset,
bits, set ? bits : 0);
}
-static int ksz9477_change_mtu(struct dsa_switch *ds, int port, int mtu)
+static int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu)
{
- struct ksz_device *dev = ds->priv;
u16 frame_size, max_frame = 0;
int i;
@@ -65,7 +64,7 @@ static int ksz9477_change_mtu(struct dsa_switch *ds, int port, int mtu)
REG_SW_MTU_MASK, max_frame);
}
-static int ksz9477_max_mtu(struct dsa_switch *ds, int port)
+static int ksz9477_max_mtu(struct ksz_device *dev, int port)
{
return KSZ9477_MAX_FRAME_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
}
@@ -1296,7 +1295,7 @@ static int ksz9477_setup(struct dsa_switch *ds)
static const struct dsa_switch_ops ksz9477_switch_ops = {
.get_tag_protocol = ksz_get_tag_protocol,
- .setup = ksz9477_setup,
+ .setup = ksz_setup,
.phy_read = ksz_phy_read16,
.phy_write = ksz_phy_write16,
.phylink_mac_link_down = ksz_mac_link_down,
@@ -1320,8 +1319,8 @@ static const struct dsa_switch_ops ksz9477_switch_ops = {
.port_mirror_add = ksz_port_mirror_add,
.port_mirror_del = ksz_port_mirror_del,
.get_stats64 = ksz_get_stats64,
- .port_change_mtu = ksz9477_change_mtu,
- .port_max_mtu = ksz9477_max_mtu,
+ .port_change_mtu = ksz_change_mtu,
+ .port_max_mtu = ksz_max_mtu,
};
static u32 ksz9477_get_port_addr(int port, int offset)
@@ -1382,6 +1381,7 @@ static void ksz9477_switch_exit(struct ksz_device *dev)
}
static const struct ksz_dev_ops ksz9477_dev_ops = {
+ .setup = ksz9477_setup,
.get_port_addr = ksz9477_get_port_addr,
.cfg_port_member = ksz9477_cfg_port_member,
.flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
@@ -1405,6 +1405,8 @@ static const struct ksz_dev_ops ksz9477_dev_ops = {
.fdb_del = ksz9477_fdb_del,
.mdb_add = ksz9477_mdb_add,
.mdb_del = ksz9477_mdb_del,
+ .change_mtu = ksz9477_change_mtu,
+ .max_mtu = ksz9477_max_mtu,
.shutdown = ksz9477_reset_switch,
.init = ksz9477_switch_init,
.exit = ksz9477_switch_exit,
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 8f79ff1ac648..19f8e492d3aa 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -16,6 +16,7 @@
#include <linux/if_bridge.h>
#include <linux/of_device.h>
#include <linux/of_net.h>
+#include <linux/micrel_phy.h>
#include <net/dsa.h>
#include <net/switchdev.h>
@@ -593,6 +594,14 @@ static void ksz_update_port_member(struct ksz_device *dev, int port)
dev->dev_ops->cfg_port_member(dev, port, port_member | cpu_port);
}
+int ksz_setup(struct dsa_switch *ds)
+{
+ struct ksz_device *dev = ds->priv;
+
+ return dev->dev_ops->setup(ds);
+}
+EXPORT_SYMBOL_GPL(ksz_setup);
+
static void port_r_cnt(struct ksz_device *dev, int port)
{
struct ksz_port_mib *mib = &dev->ports[port].mib;
@@ -692,6 +701,23 @@ int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
}
EXPORT_SYMBOL_GPL(ksz_phy_write16);
+u32 ksz_get_phy_flags(struct dsa_switch *ds, int port)
+{
+ struct ksz_device *dev = ds->priv;
+
+ if (dev->chip_id == KSZ8830_CHIP_ID) {
+ /* Silicon Errata Sheet (DS80000830A):
+ * Port 1 does not work with LinkMD Cable-Testing.
+ * Port 1 does not respond to received PAUSE control frames.
+ */
+ if (!port)
+ return MICREL_KSZ8_P1_ERRATA;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ksz_get_phy_flags);
+
void ksz_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
phy_interface_t interface)
{
@@ -981,6 +1007,30 @@ void ksz_port_mirror_del(struct dsa_switch *ds, int port,
}
EXPORT_SYMBOL_GPL(ksz_port_mirror_del);
+int ksz_change_mtu(struct dsa_switch *ds, int port, int mtu)
+{
+ struct ksz_device *dev = ds->priv;
+ int ret = -EOPNOTSUPP;
+
+ if (dev->dev_ops->change_mtu)
+ ret = dev->dev_ops->change_mtu(dev, port, mtu);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ksz_change_mtu);
+
+int ksz_max_mtu(struct dsa_switch *ds, int port)
+{
+ struct ksz_device *dev = ds->priv;
+ int ret = -EOPNOTSUPP;
+
+ if (dev->dev_ops->max_mtu)
+ ret = dev->dev_ops->max_mtu(dev, port);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ksz_max_mtu);
+
static int ksz_switch_detect(struct ksz_device *dev)
{
u8 id1, id2;
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 133b1a257868..f7275c4f633a 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -161,6 +161,7 @@ struct alu_struct {
};
struct ksz_dev_ops {
+ int (*setup)(struct dsa_switch *ds);
u32 (*get_port_addr)(int port, int offset);
void (*cfg_port_member)(struct ksz_device *dev, int port, u8 member);
void (*flush_dyn_mac_table)(struct ksz_device *dev, int port);
@@ -207,6 +208,8 @@ struct ksz_dev_ops {
int (*get_stp_reg)(void);
void (*get_caps)(struct ksz_device *dev, int port,
struct phylink_config *config);
+ int (*change_mtu)(struct ksz_device *dev, int port, int mtu);
+ int (*max_mtu)(struct ksz_device *dev, int port);
void (*freeze_mib)(struct ksz_device *dev, int port, bool freeze);
void (*port_init_cnt)(struct ksz_device *dev, int port);
int (*shutdown)(struct ksz_device *dev);
@@ -232,8 +235,10 @@ extern const struct ksz_chip_data ksz_switch_chips[];
/* Common DSA access functions */
+int ksz_setup(struct dsa_switch *ds);
int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg);
int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val);
+u32 ksz_get_phy_flags(struct dsa_switch *ds, int port);
void ksz_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
phy_interface_t interface);
int ksz_sset_count(struct dsa_switch *ds, int port, int sset);
@@ -274,6 +279,8 @@ int ksz_port_mirror_add(struct dsa_switch *ds, int port,
bool ingress, struct netlink_ext_ack *extack);
void ksz_port_mirror_del(struct dsa_switch *ds, int port,
struct dsa_mall_mirror_tc_entry *mirror);
+int ksz_change_mtu(struct dsa_switch *ds, int port, int mtu);
+int ksz_max_mtu(struct dsa_switch *ds, int port);
/* Common register access functions */
--
2.36.1
Powered by blists - more mailing lists