lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu,  2 Jun 2022 09:48:40 +0200
From:   Rasmus Villemoes <linux@...musvillemoes.dk>
To:     Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>
Cc:     Jakub Kicinski <kuba@...nel.org>, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        "David S. Miller" <davem@...emloft.net>,
        Rasmus Villemoes <linux@...musvillemoes.dk>
Subject: [PATCH v2] net: stmmac: use dev_err_probe() for reporting mdio bus registration failure

I have a board where these two lines are always printed during boot:

   imx-dwmac 30bf0000.ethernet: Cannot register the MDIO bus
   imx-dwmac 30bf0000.ethernet: stmmac_dvr_probe: MDIO bus (id: 1) registration failed

It's perfectly fine, and the device is successfully (and silently, as
far as the console goes) probed later.

Use dev_err_probe() instead, which will demote these messages to debug
level (thus removing the alarming messages from the console) when the
error is -EPROBE_DEFER, and also has the advantage of including the
error code if/when it happens to be something other than -EPROBE_DEFER.

While here, add the missing \n to one of the format strings.

Signed-off-by: Rasmus Villemoes <linux@...musvillemoes.dk>
---
v2: Reindent following lines, fix spello in commit message, also add \n.

 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++---
 drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 3b81d4e9dc83..d1a7cf4567bc 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7129,9 +7129,9 @@ int stmmac_dvr_probe(struct device *device,
 		/* MDIO bus Registration */
 		ret = stmmac_mdio_register(ndev);
 		if (ret < 0) {
-			dev_err(priv->device,
-				"%s: MDIO bus (id: %d) registration failed",
-				__func__, priv->plat->bus_id);
+			dev_err_probe(priv->device, ret,
+				      "%s: MDIO bus (id: %d) registration failed\n",
+				      __func__, priv->plat->bus_id);
 			goto error_mdio_register;
 		}
 	}
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 9bc625fccca0..03d3d1f7aa4b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -482,7 +482,7 @@ int stmmac_mdio_register(struct net_device *ndev)
 
 	err = of_mdiobus_register(new_bus, mdio_node);
 	if (err != 0) {
-		dev_err(dev, "Cannot register the MDIO bus\n");
+		dev_err_probe(dev, err, "Cannot register the MDIO bus\n");
 		goto bus_register_fail;
 	}
 
-- 
2.31.1

Powered by blists - more mailing lists