netdev - Re: [RFC PATCH 04/13] can: slcan: use CAN network device driver API

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220607111330.tkpaplzeupfq3peh@pengutronix.de>
Date:   Tue, 7 Jun 2022 13:13:30 +0200
From:   Marc Kleine-Budde <mkl@...gutronix.de>
To:     Dario Binacchi <dario.binacchi@...rulasolutions.com>
Cc:     linux-kernel@...r.kernel.org,
        Amarula patchwork <linux-amarula@...rulasolutions.com>,
        michael@...rulasolutions.com,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Wolfgang Grandegger <wg@...ndegger.com>,
        linux-can@...r.kernel.org, netdev@...r.kernel.org
Subject: Re: [RFC PATCH 04/13] can: slcan: use CAN network device driver API

On 07.06.2022 11:47:43, Dario Binacchi wrote:
> As suggested by commit [1], now the driver uses the functions and the
> data structures provided by the CAN network device driver interface.
> 
> There is no way to set bitrate for SLCAN based devices via ip tool, so
  ^^^^^^^^^^^^^^^
Currently the driver doesn't implement a way

> you'll have to do this by slcand/slcan_attach invocation through the
> -sX parameter:
> 
> - slcan_attach -f -s6 -o /dev/ttyACM0
> - slcand -f -s8 -o /dev/ttyUSB0
> 
> where -s6 in will set adapter's bitrate to 500 Kbit/s and -s8 to
> 1Mbit/s.
> See the table below for further CAN bitrates:
> - s0 ->   10 Kbit/s
> - s1 ->   20 Kbit/s
> - s2 ->   50 Kbit/s
> - s3 ->  100 Kbit/s
> - s4 ->  125 Kbit/s
> - s5 ->  250 Kbit/s
> - s6 ->  500 Kbit/s
> - s7 ->  800 Kbit/s
> - s8 -> 1000 Kbit/s
> 
> In doing so, the struct can_priv::bittiming.bitrate of the driver is not
> set and since the open_candev() checks that the bitrate has been set, it
> must be a non-zero value, the bitrate is set to a fake value (-1) before
> it is called.

What does

| ip --details -s -s link show

show as the bit rate?

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)