netdev - Re: [RFC PATCH 00/13] can: slcan: extend supported features

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 7 Jun 2022 12:39:23 +0200
From:   Marc Kleine-Budde <mkl@...gutronix.de>
To:     Vincent MAILHOL <mailhol.vincent@...adoo.fr>
Cc:     Dario Binacchi <dario.binacchi@...rulasolutions.com>,
        linux-kernel@...r.kernel.org,
        Amarula patchwork <linux-amarula@...rulasolutions.com>,
        michael@...rulasolutions.com,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jakub Kicinski <kuba@...nel.org>,
        Jiri Slaby <jirislaby@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Sebastian Andrzej Siewior <bigeasy@...utronix.de>,
        Wolfgang Grandegger <wg@...ndegger.com>,
        linux-can@...r.kernel.org, netdev@...r.kernel.org
Subject: Re: [RFC PATCH 00/13] can: slcan: extend supported features

On 07.06.2022 19:27:05, Vincent MAILHOL wrote:
> On Tue. 7 juin 2022 at 18:47, Dario Binacchi
> <dario.binacchi@...rulasolutions.com> wrote:
> > This series originated as a result of CAN communication tests for an
> > application using the USBtin adapter (https://www.fischl.de/usbtin/).
> > The tests showed some errors but for the driver everything was ok.
> > Also, being the first time I used the slcan driver, I was amazed that
> > it was not possible to configure the bitrate via the ip tool.
> > For these two reasons, I started looking at the driver code and realized
> > that it didn't use the CAN network device driver interface.
> 
> That's funny! Yesterday, I sent this comment:
> https://lore.kernel.org/linux-can/CAMZ6RqKZwC_OKcgH+WPacY6kbNbj4xR2Gdg2NQtm5Ka5Hfw79A@mail.gmail.com/
> 
> And today, you send a full series to remove all the dust from the
> slcan driver. Do I have some kind of mystical power to summon people
> on the mailing list?

That would be very useful and awesome super power, I'm a bit jealous. :D

> > Starting from these assumptions, I tried to:
> > - Use the CAN network device driver interface.
> 
> In order to use the CAN network device driver, a.k.a. can-dev module,
> drivers/net/can/Kbuild has to be adjusted: move slcan inside CAN_DEV
> scope.
> 
> @Mark: because I will have to send a new version for my can-dev/Kbuild
> cleanup, maybe I can take that change and add it to my series?

Let's get the your Kconfig/Makefile changes into can-next/master first.
Then Dario can then base this series on that branch.

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)