| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220610032941.113690-4-boon.leong.ong@intel.com>
Date: Fri, 10 Jun 2022 11:29:38 +0800
From: Ong Boon Leong <boon.leong.ong@...el.com>
To: Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <Jose.Abreu@...opsys.com>,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Paolo Abeni <pabeni@...hat.com>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Vladimir Oltean <olteanv@...il.com>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>
Cc: netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Emilio Riva <emilio.riva@...csson.com>,
Ong Boon Leong <boon.leong.ong@...el.com>
Subject: [PATCH net-next v2 3/6] net: pcs: xpcs: add CL37 1000BASE-X AN support
For CL37 1000BASE-X AN, DW xPCS does not support C22 method but offers
C45 vendor-specific MII MMD for programming.
We also add the ability to disable Autoneg (through ethtool for certain
network switch that supports 1000BASE-X (1000Mbps and Full-Duplex) but
not Autoneg capability.
v2: Fixes to issues spotted by Russell King in v1. Thanks!
https://patchwork.kernel.org/comment/24826650/
Use phylink_mii_c22_pcs_encode_advertisement() and implement
C45 MII ADV handling since IP only support C45 access.
Tested-by: Emilio Riva <emilio.riva@...csson.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@...el.com>
---
drivers/net/pcs/pcs-xpcs.c | 180 +++++++++++++++++++++++++++++++++++
include/linux/pcs/pcs-xpcs.h | 1 +
2 files changed, 181 insertions(+)
diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index 48d81c40aab..5f75ad503ef 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -77,6 +77,14 @@ static const int xpcs_sgmii_features[] = {
__ETHTOOL_LINK_MODE_MASK_NBITS,
};
+static const int xpcs_1000basex_features[] = {
+ ETHTOOL_LINK_MODE_Pause_BIT,
+ ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+ ETHTOOL_LINK_MODE_Autoneg_BIT,
+ ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
+ __ETHTOOL_LINK_MODE_MASK_NBITS,
+};
+
static const int xpcs_2500basex_features[] = {
ETHTOOL_LINK_MODE_Pause_BIT,
ETHTOOL_LINK_MODE_Asym_Pause_BIT,
@@ -102,6 +110,10 @@ static const phy_interface_t xpcs_sgmii_interfaces[] = {
PHY_INTERFACE_MODE_SGMII,
};
+static const phy_interface_t xpcs_1000basex_interfaces[] = {
+ PHY_INTERFACE_MODE_1000BASEX,
+};
+
static const phy_interface_t xpcs_2500basex_interfaces[] = {
PHY_INTERFACE_MODE_2500BASEX,
PHY_INTERFACE_MODE_MAX,
@@ -112,6 +124,7 @@ enum {
DW_XPCS_10GKR,
DW_XPCS_XLGMII,
DW_XPCS_SGMII,
+ DW_XPCS_1000BASEX,
DW_XPCS_2500BASEX,
DW_XPCS_INTERFACE_MAX,
};
@@ -189,6 +202,16 @@ int xpcs_write(struct dw_xpcs *xpcs, int dev, u32 reg, u16 val)
return mdiobus_c45_write(bus, addr, dev, reg, val);
}
+int xpcs_modify_changed(struct dw_xpcs *xpcs, int dev, u32 reg,
+ u16 mask, u16 set)
+{
+ u32 reg_addr = mdiobus_c45_addr(dev, reg);
+ struct mii_bus *bus = xpcs->mdiodev->bus;
+ int addr = xpcs->mdiodev->addr;
+
+ return mdiobus_modify_changed(bus, addr, reg_addr, mask, set);
+}
+
static int xpcs_read_vendor(struct dw_xpcs *xpcs, int dev, u32 reg)
{
return xpcs_read(xpcs, dev, DW_VENDOR | reg);
@@ -237,6 +260,7 @@ static int xpcs_soft_reset(struct dw_xpcs *xpcs,
break;
case DW_AN_C37_SGMII:
case DW_2500BASEX:
+ case DW_AN_C37_1000BASEX:
dev = MDIO_MMD_VEND2;
break;
default:
@@ -772,6 +796,68 @@ static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs, unsigned int mode)
return ret;
}
+static int xpcs_config_aneg_c37_1000basex(struct dw_xpcs *xpcs, unsigned int mode,
+ const unsigned long *advertising)
+{
+ phy_interface_t interface = PHY_INTERFACE_MODE_1000BASEX;
+ int ret, mdio_ctrl, adv;
+ bool changed = 0;
+
+ /* According to Chap 7.12, to set 1000BASE-X C37 AN, AN must
+ * be disabled first:-
+ * 1) VR_MII_MMD_CTRL Bit(12)[AN_ENABLE] = 0b
+ * 2) VR_MII_AN_CTRL Bit(2:1)[PCS_MODE] = 00b (1000BASE-X C37)
+ */
+ mdio_ctrl = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL);
+ if (mdio_ctrl < 0)
+ return mdio_ctrl;
+
+ if (mdio_ctrl & AN_CL37_EN) {
+ ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL,
+ mdio_ctrl & ~AN_CL37_EN);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_CTRL);
+ if (ret < 0)
+ return ret;
+
+ ret &= ~DW_VR_MII_PCS_MODE_MASK;
+ ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_CTRL, ret);
+ if (ret < 0)
+ return ret;
+
+ /* Check for advertising changes and update the C45 MII ADV
+ * register accordingly.
+ */
+ adv = phylink_mii_c22_pcs_encode_advertisement(interface,
+ advertising);
+ if (adv >= 0) {
+ ret = xpcs_modify_changed(xpcs, MDIO_MMD_VEND2,
+ MII_ADVERTISE, 0xffff, adv);
+ if (ret < 0)
+ return ret;
+
+ changed = ret;
+ }
+
+ /* Clear CL37 AN complete status */
+ ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
+ if (ret < 0)
+ return ret;
+
+ if (phylink_autoneg_inband(mode) &&
+ linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, advertising)) {
+ ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL,
+ mdio_ctrl | AN_CL37_EN);
+ if (ret < 0)
+ return ret;
+ }
+
+ return changed;
+}
+
static int xpcs_config_2500basex(struct dw_xpcs *xpcs)
{
int ret;
@@ -817,6 +903,12 @@ int xpcs_do_config(struct dw_xpcs *xpcs, phy_interface_t interface,
if (ret)
return ret;
break;
+ case DW_AN_C37_1000BASEX:
+ ret = xpcs_config_aneg_c37_1000basex(xpcs, mode,
+ advertising);
+ if (ret)
+ return ret;
+ break;
case DW_2500BASEX:
ret = xpcs_config_2500basex(xpcs);
if (ret)
@@ -921,6 +1013,40 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
return 0;
}
+static int xpcs_get_state_c37_1000basex(struct dw_xpcs *xpcs,
+ struct phylink_link_state *state)
+{
+ int lpa, adv;
+ int ret;
+
+ if (state->an_enabled) {
+ /* Reset link state */
+ state->link = false;
+
+ lpa = xpcs_read(xpcs, MDIO_MMD_VEND2, MII_LPA);
+ if (lpa < 0 || lpa & LPA_RFAULT)
+ return lpa;
+
+ adv = xpcs_read(xpcs, MDIO_MMD_VEND2, MII_ADVERTISE);
+ if (adv < 0)
+ return adv;
+
+ if (lpa & ADVERTISE_1000XFULL &&
+ adv & ADVERTISE_1000XFULL) {
+ state->link = true;
+ state->speed = SPEED_1000;
+ state->duplex = DUPLEX_FULL;
+ }
+
+ /* Clear CL37 AN complete status */
+ ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
static void xpcs_get_state(struct phylink_pcs *pcs,
struct phylink_link_state *state)
{
@@ -948,6 +1074,13 @@ static void xpcs_get_state(struct phylink_pcs *pcs,
ERR_PTR(ret));
}
break;
+ case DW_AN_C37_1000BASEX:
+ ret = xpcs_get_state_c37_1000basex(xpcs, state);
+ if (ret) {
+ pr_err("xpcs_get_state_c37_1000basex returned %pe\n",
+ ERR_PTR(ret));
+ }
+ break;
default:
return;
}
@@ -983,6 +1116,32 @@ static void xpcs_link_up_sgmii(struct dw_xpcs *xpcs, unsigned int mode,
pr_err("%s: xpcs_write returned %pe\n", __func__, ERR_PTR(ret));
}
+static void xpcs_link_up_1000basex(struct dw_xpcs *xpcs, int speed,
+ int duplex)
+{
+ int val, ret;
+
+ switch (speed) {
+ case SPEED_1000:
+ val = BMCR_SPEED1000;
+ break;
+ case SPEED_100:
+ case SPEED_10:
+ default:
+ pr_err("%s: speed = %d\n", __func__, speed);
+ return;
+ }
+
+ if (duplex == DUPLEX_FULL)
+ val |= BMCR_FULLDPLX;
+ else
+ pr_err("%s: half duplex not supported\n", __func__);
+
+ ret = xpcs_write(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1, val);
+ if (ret)
+ pr_err("%s: xpcs_write returned %pe\n", __func__, ERR_PTR(ret));
+}
+
void xpcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
phy_interface_t interface, int speed, int duplex)
{
@@ -992,9 +1151,23 @@ void xpcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
return xpcs_config_usxgmii(xpcs, speed);
if (interface == PHY_INTERFACE_MODE_SGMII)
return xpcs_link_up_sgmii(xpcs, mode, speed, duplex);
+ if (interface == PHY_INTERFACE_MODE_1000BASEX)
+ return xpcs_link_up_1000basex(xpcs, speed, duplex);
}
EXPORT_SYMBOL_GPL(xpcs_link_up);
+static void xpcs_an_restart(struct phylink_pcs *pcs)
+{
+ struct dw_xpcs *xpcs = phylink_pcs_to_xpcs(pcs);
+ int ret;
+
+ ret = xpcs_read(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1);
+ if (ret >= 0) {
+ ret |= BMCR_ANRESTART;
+ xpcs_write(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1, ret);
+ }
+}
+
static u32 xpcs_get_id(struct dw_xpcs *xpcs)
{
int ret;
@@ -1060,6 +1233,12 @@ static const struct xpcs_compat synopsys_xpcs_compat[DW_XPCS_INTERFACE_MAX] = {
.num_interfaces = ARRAY_SIZE(xpcs_sgmii_interfaces),
.an_mode = DW_AN_C37_SGMII,
},
+ [DW_XPCS_1000BASEX] = {
+ .supported = xpcs_1000basex_features,
+ .interface = xpcs_1000basex_interfaces,
+ .num_interfaces = ARRAY_SIZE(xpcs_1000basex_interfaces),
+ .an_mode = DW_AN_C37_1000BASEX,
+ },
[DW_XPCS_2500BASEX] = {
.supported = xpcs_2500basex_features,
.interface = xpcs_2500basex_interfaces,
@@ -1115,6 +1294,7 @@ static const struct phylink_pcs_ops xpcs_phylink_ops = {
.pcs_validate = xpcs_validate,
.pcs_config = xpcs_config,
.pcs_get_state = xpcs_get_state,
+ .pcs_an_restart = xpcs_an_restart,
.pcs_link_up = xpcs_link_up,
};
diff --git a/include/linux/pcs/pcs-xpcs.h b/include/linux/pcs/pcs-xpcs.h
index 37eb97cc228..d2da1e0b4a9 100644
--- a/include/linux/pcs/pcs-xpcs.h
+++ b/include/linux/pcs/pcs-xpcs.h
@@ -17,6 +17,7 @@
#define DW_AN_C73 1
#define DW_AN_C37_SGMII 2
#define DW_2500BASEX 3
+#define DW_AN_C37_1000BASEX 4
struct xpcs_id;
--
2.25.1
Powered by blists - more mailing lists