| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220614081523.wseqxqw576nyzerh@skbuf>
Date: Tue, 14 Jun 2022 11:15:23 +0300
From: Vladimir Oltean <olteanv@...il.com>
To: Arun Ramadoss <arun.ramadoss@...rochip.com>
Cc: linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
Woojung Huh <woojung.huh@...rochip.com>,
UNGLinuxDriver@...rochip.com, Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Russell King <linux@...linux.org.uk>
Subject: Re: [RFC Patch net-next v2 10/15] net: dsa: microchip: move the
setup, get_phy_flags & mtu to ksz_common
On Mon, May 30, 2022 at 04:12:52PM +0530, Arun Ramadoss wrote:
> This patch assigns the .setup, get_phy_flags & mtu hook of ksz8795 and
> ksz9477 in dsa_switch_ops to ksz_common. And the individual switches
> setup implementations are called based on the ksz_dev_ops. For
> get_phy_flags hooks,checks whether the chip is ksz8863/kss8793 then it
> returns error for port1.
>
> Signed-off-by: Arun Ramadoss <arun.ramadoss@...rochip.com>
> ---
> drivers/net/dsa/microchip/ksz8795.c | 17 ++-------
> drivers/net/dsa/microchip/ksz9477.c | 14 ++++----
> drivers/net/dsa/microchip/ksz_common.c | 50 ++++++++++++++++++++++++++
> drivers/net/dsa/microchip/ksz_common.h | 7 ++++
> 4 files changed, 68 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
> index 528de481b319..1058b6883caa 100644
> --- a/drivers/net/dsa/microchip/ksz8795.c
> +++ b/drivers/net/dsa/microchip/ksz8795.c
> @@ -898,18 +898,6 @@ static void ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
> }
> }
>
> -static u32 ksz8_sw_get_phy_flags(struct dsa_switch *ds, int port)
> -{
> - /* Silicon Errata Sheet (DS80000830A):
> - * Port 1 does not work with LinkMD Cable-Testing.
> - * Port 1 does not respond to received PAUSE control frames.
> - */
> - if (!port)
> - return MICREL_KSZ8_P1_ERRATA;
> -
> - return 0;
> -}
> -
> static void ksz8_cfg_port_member(struct ksz_device *dev, int port, u8 member)
> {
> u8 data;
> @@ -1476,8 +1464,8 @@ static void ksz8_get_caps(struct ksz_device *dev, int port,
>
> static const struct dsa_switch_ops ksz8_switch_ops = {
> .get_tag_protocol = ksz_get_tag_protocol,
> - .get_phy_flags = ksz8_sw_get_phy_flags,
> - .setup = ksz8_setup,
> + .get_phy_flags = ksz_get_phy_flags,
> + .setup = ksz_setup,
> .phy_read = ksz_phy_read16,
> .phy_write = ksz_phy_write16,
> .phylink_get_caps = ksz_phylink_get_caps,
> @@ -1544,6 +1532,7 @@ static void ksz8_switch_exit(struct ksz_device *dev)
> }
>
> static const struct ksz_dev_ops ksz8_dev_ops = {
> + .setup = ksz8_setup,
> .get_port_addr = ksz8_get_port_addr,
> .cfg_port_member = ksz8_cfg_port_member,
> .flush_dyn_mac_table = ksz8_flush_dyn_mac_table,
> diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
> index d70e0c32b309..d7474d9d4384 100644
> --- a/drivers/net/dsa/microchip/ksz9477.c
> +++ b/drivers/net/dsa/microchip/ksz9477.c
> @@ -47,9 +47,8 @@ static void ksz9477_port_cfg32(struct ksz_device *dev, int port, int offset,
> bits, set ? bits : 0);
> }
>
> -static int ksz9477_change_mtu(struct dsa_switch *ds, int port, int mtu)
> +static int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu)
> {
> - struct ksz_device *dev = ds->priv;
> u16 frame_size, max_frame = 0;
> int i;
>
> @@ -65,7 +64,7 @@ static int ksz9477_change_mtu(struct dsa_switch *ds, int port, int mtu)
> REG_SW_MTU_MASK, max_frame);
> }
>
> -static int ksz9477_max_mtu(struct dsa_switch *ds, int port)
> +static int ksz9477_max_mtu(struct ksz_device *dev, int port)
> {
> return KSZ9477_MAX_FRAME_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
> }
> @@ -1296,7 +1295,7 @@ static int ksz9477_setup(struct dsa_switch *ds)
>
> static const struct dsa_switch_ops ksz9477_switch_ops = {
> .get_tag_protocol = ksz_get_tag_protocol,
> - .setup = ksz9477_setup,
> + .setup = ksz_setup,
> .phy_read = ksz_phy_read16,
> .phy_write = ksz_phy_write16,
> .phylink_mac_link_down = ksz_mac_link_down,
> @@ -1320,8 +1319,8 @@ static const struct dsa_switch_ops ksz9477_switch_ops = {
> .port_mirror_add = ksz_port_mirror_add,
> .port_mirror_del = ksz_port_mirror_del,
> .get_stats64 = ksz_get_stats64,
> - .port_change_mtu = ksz9477_change_mtu,
> - .port_max_mtu = ksz9477_max_mtu,
> + .port_change_mtu = ksz_change_mtu,
> + .port_max_mtu = ksz_max_mtu,
> };
>
> static u32 ksz9477_get_port_addr(int port, int offset)
> @@ -1382,6 +1381,7 @@ static void ksz9477_switch_exit(struct ksz_device *dev)
> }
>
> static const struct ksz_dev_ops ksz9477_dev_ops = {
> + .setup = ksz9477_setup,
> .get_port_addr = ksz9477_get_port_addr,
> .cfg_port_member = ksz9477_cfg_port_member,
> .flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
> @@ -1405,6 +1405,8 @@ static const struct ksz_dev_ops ksz9477_dev_ops = {
> .fdb_del = ksz9477_fdb_del,
> .mdb_add = ksz9477_mdb_add,
> .mdb_del = ksz9477_mdb_del,
> + .change_mtu = ksz9477_change_mtu,
> + .max_mtu = ksz9477_max_mtu,
> .shutdown = ksz9477_reset_switch,
> .init = ksz9477_switch_init,
> .exit = ksz9477_switch_exit,
> diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
> index 8f79ff1ac648..19f8e492d3aa 100644
> --- a/drivers/net/dsa/microchip/ksz_common.c
> +++ b/drivers/net/dsa/microchip/ksz_common.c
> @@ -16,6 +16,7 @@
> #include <linux/if_bridge.h>
> #include <linux/of_device.h>
> #include <linux/of_net.h>
> +#include <linux/micrel_phy.h>
> #include <net/dsa.h>
> #include <net/switchdev.h>
>
> @@ -593,6 +594,14 @@ static void ksz_update_port_member(struct ksz_device *dev, int port)
> dev->dev_ops->cfg_port_member(dev, port, port_member | cpu_port);
> }
>
> +int ksz_setup(struct dsa_switch *ds)
> +{
> + struct ksz_device *dev = ds->priv;
> +
> + return dev->dev_ops->setup(ds);
> +}
> +EXPORT_SYMBOL_GPL(ksz_setup);
I see these changes as being of questionable value if you do not plan to
actually share some code between ->setup implementations. What would be
desirable is if ksz_common.c decides what to do, and ksz8795.c /
ksz9477.c only offer the implementations for fine-grained dev_ops.
Currently there is code that can be reused between the setup functions
of the 2 drivers, but also there is some divergence in configuration
which doesn't have its place (10% rate limit for broadcast storm
protection in ksz8795?). The goal should be for individual switch
drivers to not apply configuration behind the curtains as much as possible.
> +
> static void port_r_cnt(struct ksz_device *dev, int port)
> {
> struct ksz_port_mib *mib = &dev->ports[port].mib;
> @@ -692,6 +701,23 @@ int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
> }
> EXPORT_SYMBOL_GPL(ksz_phy_write16);
>
> +u32 ksz_get_phy_flags(struct dsa_switch *ds, int port)
> +{
> + struct ksz_device *dev = ds->priv;
> +
> + if (dev->chip_id == KSZ8830_CHIP_ID) {
> + /* Silicon Errata Sheet (DS80000830A):
> + * Port 1 does not work with LinkMD Cable-Testing.
> + * Port 1 does not respond to received PAUSE control frames.
> + */
> + if (!port)
> + return MICREL_KSZ8_P1_ERRATA;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(ksz_get_phy_flags);
> +
> void ksz_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
> phy_interface_t interface)
> {
> @@ -981,6 +1007,30 @@ void ksz_port_mirror_del(struct dsa_switch *ds, int port,
> }
> EXPORT_SYMBOL_GPL(ksz_port_mirror_del);
>
> +int ksz_change_mtu(struct dsa_switch *ds, int port, int mtu)
> +{
> + struct ksz_device *dev = ds->priv;
> + int ret = -EOPNOTSUPP;
> +
> + if (dev->dev_ops->change_mtu)
> + ret = dev->dev_ops->change_mtu(dev, port, mtu);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(ksz_change_mtu);
> +
> +int ksz_max_mtu(struct dsa_switch *ds, int port)
> +{
> + struct ksz_device *dev = ds->priv;
> + int ret = -EOPNOTSUPP;
> +
> + if (dev->dev_ops->max_mtu)
> + ret = dev->dev_ops->max_mtu(dev, port);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(ksz_max_mtu);
> +
> static int ksz_switch_detect(struct ksz_device *dev)
> {
> u8 id1, id2;
> diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
> index 133b1a257868..f7275c4f633a 100644
> --- a/drivers/net/dsa/microchip/ksz_common.h
> +++ b/drivers/net/dsa/microchip/ksz_common.h
> @@ -161,6 +161,7 @@ struct alu_struct {
> };
>
> struct ksz_dev_ops {
> + int (*setup)(struct dsa_switch *ds);
> u32 (*get_port_addr)(int port, int offset);
> void (*cfg_port_member)(struct ksz_device *dev, int port, u8 member);
> void (*flush_dyn_mac_table)(struct ksz_device *dev, int port);
> @@ -207,6 +208,8 @@ struct ksz_dev_ops {
> int (*get_stp_reg)(void);
> void (*get_caps)(struct ksz_device *dev, int port,
> struct phylink_config *config);
> + int (*change_mtu)(struct ksz_device *dev, int port, int mtu);
> + int (*max_mtu)(struct ksz_device *dev, int port);
> void (*freeze_mib)(struct ksz_device *dev, int port, bool freeze);
> void (*port_init_cnt)(struct ksz_device *dev, int port);
> int (*shutdown)(struct ksz_device *dev);
> @@ -232,8 +235,10 @@ extern const struct ksz_chip_data ksz_switch_chips[];
>
> /* Common DSA access functions */
>
> +int ksz_setup(struct dsa_switch *ds);
> int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg);
> int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val);
> +u32 ksz_get_phy_flags(struct dsa_switch *ds, int port);
> void ksz_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
> phy_interface_t interface);
> int ksz_sset_count(struct dsa_switch *ds, int port, int sset);
> @@ -274,6 +279,8 @@ int ksz_port_mirror_add(struct dsa_switch *ds, int port,
> bool ingress, struct netlink_ext_ack *extack);
> void ksz_port_mirror_del(struct dsa_switch *ds, int port,
> struct dsa_mall_mirror_tc_entry *mirror);
> +int ksz_change_mtu(struct dsa_switch *ds, int port, int mtu);
> +int ksz_max_mtu(struct dsa_switch *ds, int port);
>
> /* Common register access functions */
>
> --
> 2.36.1
>
Powered by blists - more mailing lists