[<prev] [next>] [day] [month] [year] [list]
Message-ID: <YqktPcFrEstedV3E@lunn.ch>
Date: Wed, 15 Jun 2022 02:52:13 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Jiawen Wu <jiawenwu@...stnetic.com>
Cc: netdev@...r.kernel.org, 'Leon Romanovsky' <leon@...nel.org>
Subject: Re: [PATCH net-next v4] net: txgbe: Add build support for txgbe
On Tue, Jun 07, 2022 at 09:54:10AM +0800, Jiawen Wu wrote:
> Hi,
>
> On Tuesday, May 31, 2022 11:27 AM, Jiawen Wu wrote:
> > Add doc build infrastructure for txgbe driver.
> > Initialize PCI memory space for WangXun 10 Gigabit Ethernet devices.
> >
> > Signed-off-by: Jiawen Wu <jiawenwu@...stnetic.com>
> > ---
> > .../device_drivers/ethernet/index.rst | 1 +
> > .../device_drivers/ethernet/wangxun/txgbe.rst | 20 ++
> > MAINTAINERS | 7 +
> > drivers/net/ethernet/Kconfig | 1 +
> > drivers/net/ethernet/Makefile | 1 +
> > drivers/net/ethernet/wangxun/Kconfig | 32 ++++
> > drivers/net/ethernet/wangxun/Makefile | 6 +
> > drivers/net/ethernet/wangxun/txgbe/Makefile | 9 +
> > drivers/net/ethernet/wangxun/txgbe/txgbe.h | 24 +++
> > .../net/ethernet/wangxun/txgbe/txgbe_main.c | 178
> > ++++++++++++++++++
> > .../net/ethernet/wangxun/txgbe/txgbe_type.h | 57 ++++++
> > drivers/pci/quirks.c | 15 ++
> > include/linux/pci_ids.h | 2 +
> > 13 files changed, 353 insertions(+)
> > create mode 100644
> > Documentation/networking/device_drivers/ethernet/wangxun/txgbe.rst
> > create mode 100644 drivers/net/ethernet/wangxun/Kconfig
> > create mode 100644 drivers/net/ethernet/wangxun/Makefile
> > create mode 100644 drivers/net/ethernet/wangxun/txgbe/Makefile
> > create mode 100644 drivers/net/ethernet/wangxun/txgbe/txgbe.h
> > create mode 100644 drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
> > create mode 100644 drivers/net/ethernet/wangxun/txgbe/txgbe_type.h
> >
>
> Can I get some suggestions on this patch?
I suggest you repost. In general, don't post more than once per 24
hours, but if you don't receiver any comments, or it is not merged
within 3 days, you probably need to repost. Also, if you post during
the merge window, you won't get too many comments, so you need to
repost once the merge window opens.
Andrew
Powered by blists - more mailing lists