netdev - [PATCH net-next 11/13] mlxsw: reg: Add egress FID field to RITR register

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sun, 19 Jun 2022 13:29:19 +0300
From:   Ido Schimmel <idosch@...dia.com>
To:     netdev@...r.kernel.org
Cc:     davem@...emloft.net, kuba@...nel.org, pabeni@...hat.com,
        edumazet@...gle.com, petrm@...dia.com, amcohen@...dia.com,
        mlxsw@...dia.com, Ido Schimmel <idosch@...dia.com>
Subject: [PATCH net-next 11/13] mlxsw: reg: Add egress FID field to RITR register

From: Amit Cohen <amcohen@...dia.com>

RITR configures the router interface table. As preparation for unified
bridge model, add egress FID field to RITR.

After routing, a packet has to perform a layer-2 lookup using the
destination MAC it got from the routing and a FID.
In the new model, the egress FID is configured by RITR for both sub-port
and FID RIFs.

Add 'efid' field to sub-port router interface and update FID router
interface related comment.

Signed-off-by: Amit Cohen <amcohen@...dia.com>
Reviewed-by: Petr Machata <petrm@...dia.com>
Signed-off-by: Ido Schimmel <idosch@...dia.com>
---
 drivers/net/ethernet/mellanox/mlxsw/reg.h | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index b9f91bef74ac..9992b64d0415 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -6885,8 +6885,10 @@ MLXSW_ITEM32(reg, ritr, vlan_if_vid, 0x08, 0, 12);
 /* FID Interface */
 
 /* reg_ritr_fid_if_fid
- * Filtering ID. Used to connect a bridge to the router. Only FIDs from
- * the vFID range are supported.
+ * Filtering ID. Used to connect a bridge to the router.
+ * When legacy bridge model is used, only FIDs from the vFID range are
+ * supported. When unified bridge model is used, this is the egress FID for
+ * router to bridge.
  * Access: RW
  */
 MLXSW_ITEM32(reg, ritr, fid_if_fid, 0x08, 0, 16);
@@ -6917,6 +6919,16 @@ MLXSW_ITEM32(reg, ritr, sp_if_lag, 0x08, 24, 1);
  */
 MLXSW_ITEM32(reg, ritr, sp_if_system_port, 0x08, 0, 16);
 
+/* reg_ritr_sp_if_efid
+ * Egress filtering ID.
+ * Used to connect the eRIF to a bridge if eRIF-ACL has modified the DMAC or
+ * the VID.
+ * Access: RW
+ *
+ * Note: Reserved when legacy bridge model is used.
+ */
+MLXSW_ITEM32(reg, ritr, sp_if_efid, 0x0C, 0, 16);
+
 /* reg_ritr_sp_if_vid
  * VLAN ID.
  * Access: RW
-- 
2.36.1