| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAJaqyWd8MR9vTRcCTktzC3VL054x5H5_sXy+MLVNewFDkjQUSw@mail.gmail.com>
Date: Wed, 22 Jun 2022 12:21:32 +0200
From: Eugenio Perez Martin <eperezma@...hat.com>
To: Stefano Garzarella <sgarzare@...hat.com>
Cc: Gautam Dawar <gautam.dawar@...inx.com>,
Jason Wang <jasowang@...hat.com>,
"Michael S. Tsirkin" <mst@...hat.com>,
Xie Yongji <xieyongji@...edance.com>,
Gautam Dawar <gdawar@...inx.com>,
Longpeng <longpeng2@...wei.com>, Eli Cohen <elic@...dia.com>,
Parav Pandit <parav@...dia.com>,
Linux Virtualization <virtualization@...ts.linux-foundation.org>,
kernel list <linux-kernel@...r.kernel.org>,
kvm <kvm@...r.kernel.org>, netdev <netdev@...r.kernel.org>,
Martin Petrus Hubertus Habets <martinh@...inx.com>,
Harpreet Singh Anand <hanand@...inx.com>,
Martin Porter <martinpo@...inx.com>,
Pablo Cascon Katchadourian <pabloc@...inx.com>,
Dinan Gunawardena <dinang@...inx.com>,
"Kamde, Tanuj" <tanuj.kamde@....com>, habetsm.xilinx@...il.com,
ecree.xilinx@...il.com, Wu Zongyong <wuzongyong@...ux.alibaba.com>,
Christophe JAILLET <christophe.jaillet@...adoo.fr>,
Zhu Lingshan <lingshan.zhu@...el.com>,
Si-Wei Liu <si-wei.liu@...cle.com>,
Dan Carpenter <dan.carpenter@...cle.com>,
Zhang Min <zhang.min9@....com.cn>
Subject: Re: [PATCH v2 19/19] vdpasim: control virtqueue support
On Tue, Jun 21, 2022 at 5:20 PM Stefano Garzarella <sgarzare@...hat.com> wrote:
>
> Hi Gautam,
>
> On Wed, Mar 30, 2022 at 8:21 PM Gautam Dawar <gautam.dawar@...inx.com> wrote:
> >
> > This patch introduces the control virtqueue support for vDPA
> > simulator. This is a requirement for supporting advanced features like
> > multiqueue.
> >
> > A requirement for control virtqueue is to isolate its memory access
> > from the rx/tx virtqueues. This is because when using vDPA device
> > for VM, the control virqueue is not directly assigned to VM. Userspace
> > (Qemu) will present a shadow control virtqueue to control for
> > recording the device states.
> >
> > The isolation is done via the virtqueue groups and ASID support in
> > vDPA through vhost-vdpa. The simulator is extended to have:
> >
> > 1) three virtqueues: RXVQ, TXVQ and CVQ (control virtqueue)
> > 2) two virtqueue groups: group 0 contains RXVQ and TXVQ; group 1
> > contains CVQ
> > 3) two address spaces and the simulator simply implements the address
> > spaces by mapping it 1:1 to IOTLB.
> >
> > For the VM use cases, userspace(Qemu) may set AS 0 to group 0 and AS 1
> > to group 1. So we have:
> >
> > 1) The IOTLB for virtqueue group 0 contains the mappings of guest, so
> > RX and TX can be assigned to guest directly.
> > 2) The IOTLB for virtqueue group 1 contains the mappings of CVQ which
> > is the buffers that allocated and managed by VMM only. So CVQ of
> > vhost-vdpa is visible to VMM only. And Guest can not access the CVQ
> > of vhost-vdpa.
> >
> > For the other use cases, since AS 0 is associated to all virtqueue
> > groups by default. All virtqueues share the same mapping by default.
> >
> > To demonstrate the function, VIRITO_NET_F_CTRL_MACADDR is
> > implemented in the simulator for the driver to set mac address.
> >
> > Signed-off-by: Jason Wang <jasowang@...hat.com>
> > Signed-off-by: Gautam Dawar <gdawar@...inx.com>
> > ---
> > drivers/vdpa/vdpa_sim/vdpa_sim.c | 91 ++++++++++++++++++++++------
> > drivers/vdpa/vdpa_sim/vdpa_sim.h | 2 +
> > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 88 ++++++++++++++++++++++++++-
> > 3 files changed, 161 insertions(+), 20 deletions(-)
> >
> > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
> > index 659e2e2e4b0c..51bd0bafce06 100644
> > --- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
> > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
> > @@ -96,11 +96,17 @@ static void vdpasim_do_reset(struct vdpasim *vdpasim)
> > {
> > int i;
> >
> > - for (i = 0; i < vdpasim->dev_attr.nvqs; i++)
> > + spin_lock(&vdpasim->iommu_lock);
> > +
> > + for (i = 0; i < vdpasim->dev_attr.nvqs; i++) {
> > vdpasim_vq_reset(vdpasim, &vdpasim->vqs[i]);
> > + vringh_set_iotlb(&vdpasim->vqs[i].vring, &vdpasim->iommu[0],
> > + &vdpasim->iommu_lock);
> > + }
> > +
> > + for (i = 0; i < vdpasim->dev_attr.nas; i++)
> > + vhost_iotlb_reset(&vdpasim->iommu[i]);
> >
> > - spin_lock(&vdpasim->iommu_lock);
> > - vhost_iotlb_reset(vdpasim->iommu);
> > spin_unlock(&vdpasim->iommu_lock);
> >
> > vdpasim->features = 0;
> > @@ -145,7 +151,7 @@ static dma_addr_t vdpasim_map_range(struct vdpasim *vdpasim, phys_addr_t paddr,
> > dma_addr = iova_dma_addr(&vdpasim->iova, iova);
> >
> > spin_lock(&vdpasim->iommu_lock);
> > - ret = vhost_iotlb_add_range(vdpasim->iommu, (u64)dma_addr,
> > + ret = vhost_iotlb_add_range(&vdpasim->iommu[0], (u64)dma_addr,
> > (u64)dma_addr + size - 1, (u64)paddr, perm);
> > spin_unlock(&vdpasim->iommu_lock);
> >
> > @@ -161,7 +167,7 @@ static void vdpasim_unmap_range(struct vdpasim *vdpasim, dma_addr_t dma_addr,
> > size_t size)
> > {
> > spin_lock(&vdpasim->iommu_lock);
> > - vhost_iotlb_del_range(vdpasim->iommu, (u64)dma_addr,
> > + vhost_iotlb_del_range(&vdpasim->iommu[0], (u64)dma_addr,
> > (u64)dma_addr + size - 1);
> > spin_unlock(&vdpasim->iommu_lock);
> >
> > @@ -250,8 +256,9 @@ struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
> > else
> > ops = &vdpasim_config_ops;
> >
> > - vdpasim = vdpa_alloc_device(struct vdpasim, vdpa, NULL, ops, 1,
> > - 1, dev_attr->name, false);
> > + vdpasim = vdpa_alloc_device(struct vdpasim, vdpa, NULL, ops,
> > + dev_attr->ngroups, dev_attr->nas,
> > + dev_attr->name, false);
> > if (IS_ERR(vdpasim)) {
> > ret = PTR_ERR(vdpasim);
> > goto err_alloc;
> > @@ -278,16 +285,20 @@ struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
> > if (!vdpasim->vqs)
> > goto err_iommu;
> >
> > - vdpasim->iommu = vhost_iotlb_alloc(max_iotlb_entries, 0);
> > + vdpasim->iommu = kmalloc_array(vdpasim->dev_attr.nas,
> > + sizeof(*vdpasim->iommu), GFP_KERNEL);
> > if (!vdpasim->iommu)
> > goto err_iommu;
> >
> > + for (i = 0; i < vdpasim->dev_attr.nas; i++)
> > + vhost_iotlb_init(&vdpasim->iommu[i], 0, 0);
> > +
> > vdpasim->buffer = kvmalloc(dev_attr->buffer_size, GFP_KERNEL);
> > if (!vdpasim->buffer)
> > goto err_iommu;
> >
> > for (i = 0; i < dev_attr->nvqs; i++)
> > - vringh_set_iotlb(&vdpasim->vqs[i].vring, vdpasim->iommu,
> > + vringh_set_iotlb(&vdpasim->vqs[i].vring, &vdpasim->iommu[0],
> > &vdpasim->iommu_lock);
> >
> > ret = iova_cache_get();
> > @@ -401,7 +412,11 @@ static u32 vdpasim_get_vq_align(struct vdpa_device *vdpa)
> >
> > static u32 vdpasim_get_vq_group(struct vdpa_device *vdpa, u16 idx)
> > {
> > - return 0;
> > + /* RX and TX belongs to group 0, CVQ belongs to group 1 */
> > + if (idx == 2)
> > + return 1;
> > + else
> > + return 0;
>
> This code only works for the vDPA-net simulator, since
> vdpasim_get_vq_group() is also shared with other simulators (e.g.
> vdpa_sim_blk),
That's totally right.
> should we move this net-specific code into
> vdpa_sim_net.c, maybe adding a callback implemented by the different
> simulators?
>
At this moment, VDPASIM_BLK_VQ_NUM is fixed to 1, so maybe the right
thing to do for the -rc phase is to check if idx > vdpasim.attr.nvqs?
It's a more general fix.
For the general case, yes, a callback should be issued to the actual
simulator so it's not a surprise when VDPASIM_BLK_VQ_NUM increases,
either dynamically or by anyone testing it.
Thoughts?
Thanks!
Powered by blists - more mailing lists