lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220623005717.31040-4-vfedorenko@novek.ru>
Date:   Thu, 23 Jun 2022 03:57:17 +0300
From:   Vadim Fedorenko <vfedorenko@...ek.ru>
To:     Jakub Kicinski <kuba@...nel.org>
Cc:     Vadim Fedorenko <vadfed@...com>, Aya Levin <ayal@...dia.com>,
        Arkadiusz Kubalewski <arkadiusz.kubalewski@...el.com>,
        netdev@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: [RFC PATCH v1 3/3] ptp_ocp: implement DPLL ops

From: Vadim Fedorenko <vadfed@...com>

Implement DPLL operations in ptp_ocp driver.

Signed-off-by: Vadim Fedorenko <vadfed@...com>
---
 drivers/ptp/Kconfig   |  1 +
 drivers/ptp/ptp_ocp.c | 86 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 87 insertions(+)

diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
index 458218f88c5e..f74846ebc177 100644
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
@@ -176,6 +176,7 @@ config PTP_1588_CLOCK_OCP
 	depends on !S390
 	depends on COMMON_CLK
 	select NET_DEVLINK
+	select DPLL
 	help
 	  This driver adds support for an OpenCompute time card.
 
diff --git a/drivers/ptp/ptp_ocp.c b/drivers/ptp/ptp_ocp.c
index e59ea2173aac..693168fdda6c 100644
--- a/drivers/ptp/ptp_ocp.c
+++ b/drivers/ptp/ptp_ocp.c
@@ -21,6 +21,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/nvmem-consumer.h>
 #include <linux/crc16.h>
+#include <uapi/linux/dpll.h>
 
 #define PCI_VENDOR_ID_FACEBOOK			0x1d9b
 #define PCI_DEVICE_ID_FACEBOOK_TIMECARD		0x0400
@@ -336,6 +337,7 @@ struct ptp_ocp {
 	struct ptp_ocp_signal	signal[4];
 	struct ptp_ocp_sma_connector sma[4];
 	const struct ocp_sma_op *sma_op;
+	struct dpll_device *dpll;
 };
 
 #define OCP_REQ_TIMESTAMP	BIT(0)
@@ -3713,6 +3715,82 @@ ptp_ocp_detach(struct ptp_ocp *bp)
 	device_unregister(&bp->dev);
 }
 
+static int ptp_ocp_dpll_get_status(struct dpll_device *dpll)
+{
+	struct ptp_ocp *bp = (struct ptp_ocp *)dpll_priv(dpll);
+	int sync;
+
+	sync = ioread32(&bp->reg->status) & OCP_STATUS_IN_SYNC;
+	return sync;
+}
+
+static int ptp_ocp_dpll_get_lock_status(struct dpll_device *dpll)
+{
+	struct ptp_ocp *bp = (struct ptp_ocp *)dpll_priv(dpll);
+	int sync;
+
+	sync = ioread32(&bp->reg->status) & OCP_STATUS_IN_SYNC;
+	return sync;
+}
+
+static int ptp_ocp_dpll_get_source_type(struct dpll_device *dpll, int sma)
+{
+	struct ptp_ocp *bp = (struct ptp_ocp *)dpll_priv(dpll);
+	int ret;
+
+	if (bp->sma[sma].mode != SMA_MODE_IN)
+		return -1;
+
+	switch (ptp_ocp_sma_get(bp, sma)) {
+	case 0:
+		ret = DPLL_TYPE_EXT_10MHZ;
+		break;
+	case 1:
+	case 2:
+		ret = DPLL_TYPE_EXT_1PPS;
+		break;
+	default:
+		ret = DPLL_TYPE_INT_OSCILLATOR;
+	}
+
+	return ret;
+}
+
+
+static int ptp_ocp_dpll_get_output_type(struct dpll_device *dpll, int sma)
+{
+	struct ptp_ocp *bp = (struct ptp_ocp *)dpll_priv(dpll);
+	int ret;
+
+	if (bp->sma[sma].mode != SMA_MODE_OUT)
+		return -1;
+
+	switch (ptp_ocp_sma_get(bp, sma)) {
+	case 0:
+		ret = DPLL_TYPE_EXT_10MHZ;
+		break;
+	case 1:
+	case 2:
+		ret = DPLL_TYPE_INT_OSCILLATOR;
+		break;
+	case 4:
+	case 8:
+		ret = DPLL_TYPE_GNSS;
+		break;
+	default:
+		ret = DPLL_TYPE_INT_OSCILLATOR;
+	}
+
+	return ret;
+}
+
+static struct dpll_device_ops dpll_ops = {
+	.get_status		= ptp_ocp_dpll_get_status,
+	.get_lock_status	= ptp_ocp_dpll_get_lock_status,
+	.get_source_type	= ptp_ocp_dpll_get_source_type,
+	.get_output_type	= ptp_ocp_dpll_get_output_type,
+};
+
 static int
 ptp_ocp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
@@ -3768,6 +3846,14 @@ ptp_ocp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	ptp_ocp_info(bp);
 	devlink_register(devlink);
+
+	bp->dpll = dpll_device_alloc(&dpll_ops, ARRAY_SIZE(bp->sma), ARRAY_SIZE(bp->sma), bp);
+	if (!bp->dpll) {
+		dev_err(&pdev->dev, "dpll_device_alloc failed\n");
+		return 0;
+	}
+	dpll_device_register(bp->dpll);
+
 	return 0;
 
 out:
-- 
2.27.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ