[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220625120335.324697-3-mkl@pengutronix.de>
Date: Sat, 25 Jun 2022 14:03:15 +0200
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, kuba@...nel.org, linux-can@...r.kernel.org,
kernel@...gutronix.de, Marc Kleine-Budde <mkl@...gutronix.de>,
Vincent MAILHOL <mailhol.vincent@...adoo.fr>,
Srinivas Neeli <srinivas.neeli@...inx.com>,
Appana Durga Kedareswara rao <appana.durga.rao@...inx.com>,
Naga Sureshkumar Relli <naga.sureshkumar.relli@...inx.com>
Subject: [PATCH net-next 02/22] can: xilinx_can: fix typo prescalar -> prescaler
This patch fixes the typo prescalar -> prescaler.
Link: https://lore.kernel.org/all/20220609111424.3819039-1-mkl@pengutronix.de
Reported-by: Vincent MAILHOL <mailhol.vincent@...adoo.fr>
Cc: Srinivas Neeli <srinivas.neeli@...inx.com>
Cc: Appana Durga Kedareswara rao <appana.durga.rao@...inx.com>
Cc: Naga Sureshkumar Relli <naga.sureshkumar.relli@...inx.com>
Signed-off-by: Marc Kleine-Budde <mkl@...gutronix.de>
---
drivers/net/can/xilinx_can.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 70dcb45078bf..393b2d9f9d2a 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -51,7 +51,7 @@ enum xcan_reg {
/* only on CAN FD cores */
XCAN_F_BRPR_OFFSET = 0x088, /* Data Phase Baud Rate
- * Prescalar
+ * Prescaler
*/
XCAN_F_BTR_OFFSET = 0x08C, /* Data Phase Bit Timing */
XCAN_TRR_OFFSET = 0x0090, /* TX Buffer Ready Request */
@@ -430,7 +430,7 @@ static int xcan_set_bittiming(struct net_device *ndev)
return -EPERM;
}
- /* Setting Baud Rate prescalar value in BRPR Register */
+ /* Setting Baud Rate prescaler value in BRPR Register */
btr0 = (bt->brp - 1);
/* Setting Time Segment 1 in BTR Register */
@@ -447,7 +447,7 @@ static int xcan_set_bittiming(struct net_device *ndev)
if (priv->devtype.cantype == XAXI_CANFD ||
priv->devtype.cantype == XAXI_CANFD_2_0) {
- /* Setting Baud Rate prescalar value in F_BRPR Register */
+ /* Setting Baud Rate prescaler value in F_BRPR Register */
btr0 = dbt->brp - 1;
if (can_tdc_is_enabled(&priv->can)) {
if (priv->devtype.cantype == XAXI_CANFD)
--
2.35.1
Powered by blists - more mailing lists