| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220706231309.38579-3-saeed@kernel.org>
Date: Wed, 6 Jul 2022 16:13:02 -0700
From: Saeed Mahameed <saeed@...nel.org>
To: "David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Eric Dumazet <edumazet@...gle.com>
Cc: Saeed Mahameed <saeedm@...dia.com>, netdev@...r.kernel.org,
Mark Bloch <mbloch@...dia.com>, Eli Cohen <elic@...dia.com>
Subject: [net 2/9] net/mlx5: Lag, decouple FDB selection and shared FDB
From: Mark Bloch <mbloch@...dia.com>
Multiport eswitch is required to use native FDB selection instead of
affinity, This was achieved by passing the shared_fdb flag down
the HW lag creation path. While it did accomplish the goal of setting
FDB selection mode to native, it had the side effect of also
creating a shared FDB configuration.
This created a few issues:
- TC rules are inserted into a non active FDB, which means traffic isn't
offloaded as all traffic will reach only a single FDB.
- All wire traffic is treated as if a single physical port received it; while
this is true for a bond configuration, this shouldn't be the case for
multiport eswitch.
Create a new flag MLX5_LAG_MODE_FLAG_FDB_SEL_MODE_NATIVE
to indicate what FDB selection mode should be used.
Fixes: 94db33177819 ("net/mlx5: Support multiport eswitch mode")
Signed-off-by: Mark Bloch <mbloch@...dia.com>
Reviewed-by: Eli Cohen <elic@...dia.com>
Signed-off-by: Saeed Mahameed <saeedm@...dia.com>
---
.../net/ethernet/mellanox/mlx5/core/lag/debugfs.c | 12 ++++++++++--
drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c | 12 +++++++++---
drivers/net/ethernet/mellanox/mlx5/core/lag/lag.h | 1 +
drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.c | 5 ++---
4 files changed, 22 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag/debugfs.c b/drivers/net/ethernet/mellanox/mlx5/core/lag/debugfs.c
index 15e41dc84d53..f1ad233ec990 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag/debugfs.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag/debugfs.c
@@ -72,6 +72,7 @@ static int state_show(struct seq_file *file, void *priv)
static int flags_show(struct seq_file *file, void *priv)
{
struct mlx5_core_dev *dev = file->private;
+ bool fdb_sel_mode_native;
struct mlx5_lag *ldev;
bool shared_fdb;
bool lag_active;
@@ -79,14 +80,21 @@ static int flags_show(struct seq_file *file, void *priv)
ldev = dev->priv.lag;
mutex_lock(&ldev->lock);
lag_active = __mlx5_lag_is_active(ldev);
- if (lag_active)
- shared_fdb = test_bit(MLX5_LAG_MODE_FLAG_SHARED_FDB, &ldev->mode_flags);
+ if (!lag_active)
+ goto unlock;
+
+ shared_fdb = test_bit(MLX5_LAG_MODE_FLAG_SHARED_FDB, &ldev->mode_flags);
+ fdb_sel_mode_native = test_bit(MLX5_LAG_MODE_FLAG_FDB_SEL_MODE_NATIVE,
+ &ldev->mode_flags);
+unlock:
mutex_unlock(&ldev->lock);
if (!lag_active)
return -EINVAL;
seq_printf(file, "%s:%s\n", "shared_fdb", shared_fdb ? "on" : "off");
+ seq_printf(file, "%s:%s\n", "fdb_selection_mode",
+ fdb_sel_mode_native ? "native" : "affinity");
return 0;
}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c
index 2a8fc547eb37..a9b65dc47a5b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c
@@ -68,14 +68,15 @@ static int get_port_sel_mode(enum mlx5_lag_mode mode, unsigned long flags)
static int mlx5_cmd_create_lag(struct mlx5_core_dev *dev, u8 *ports, int mode,
unsigned long flags)
{
- bool shared_fdb = test_bit(MLX5_LAG_MODE_FLAG_SHARED_FDB, &flags);
+ bool fdb_sel_mode = test_bit(MLX5_LAG_MODE_FLAG_FDB_SEL_MODE_NATIVE,
+ &flags);
int port_sel_mode = get_port_sel_mode(mode, flags);
u32 in[MLX5_ST_SZ_DW(create_lag_in)] = {};
void *lag_ctx;
lag_ctx = MLX5_ADDR_OF(create_lag_in, in, ctx);
MLX5_SET(create_lag_in, in, opcode, MLX5_CMD_OP_CREATE_LAG);
- MLX5_SET(lagc, lag_ctx, fdb_selection_mode, shared_fdb);
+ MLX5_SET(lagc, lag_ctx, fdb_selection_mode, fdb_sel_mode);
if (port_sel_mode == MLX5_LAG_PORT_SELECT_MODE_QUEUE_AFFINITY) {
MLX5_SET(lagc, lag_ctx, tx_remap_affinity_1, ports[0]);
MLX5_SET(lagc, lag_ctx, tx_remap_affinity_2, ports[1]);
@@ -471,8 +472,13 @@ static int mlx5_lag_set_flags(struct mlx5_lag *ldev, enum mlx5_lag_mode mode,
bool roce_lag = mode == MLX5_LAG_MODE_ROCE;
*flags = 0;
- if (shared_fdb)
+ if (shared_fdb) {
set_bit(MLX5_LAG_MODE_FLAG_SHARED_FDB, flags);
+ set_bit(MLX5_LAG_MODE_FLAG_FDB_SEL_MODE_NATIVE, flags);
+ }
+
+ if (mode == MLX5_LAG_MODE_MPESW)
+ set_bit(MLX5_LAG_MODE_FLAG_FDB_SEL_MODE_NATIVE, flags);
if (roce_lag)
return mlx5_lag_set_port_sel_mode_roce(ldev, flags);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.h b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.h
index c81b173156d2..71d2bb969544 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.h
@@ -24,6 +24,7 @@ enum {
enum {
MLX5_LAG_MODE_FLAG_HASH_BASED,
MLX5_LAG_MODE_FLAG_SHARED_FDB,
+ MLX5_LAG_MODE_FLAG_FDB_SEL_MODE_NATIVE,
};
enum mlx5_lag_mode {
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.c b/drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.c
index ee4b25a50315..f643202b29c6 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.c
@@ -41,7 +41,6 @@ void mlx5_lag_del_mpesw_rule(struct mlx5_core_dev *dev)
int mlx5_lag_add_mpesw_rule(struct mlx5_core_dev *dev)
{
struct mlx5_lag *ldev = dev->priv.lag;
- bool shared_fdb;
int err = 0;
if (!ldev)
@@ -55,8 +54,8 @@ int mlx5_lag_add_mpesw_rule(struct mlx5_core_dev *dev)
err = -EINVAL;
goto out;
}
- shared_fdb = mlx5_shared_fdb_supported(ldev);
- err = mlx5_activate_lag(ldev, NULL, MLX5_LAG_MODE_MPESW, shared_fdb);
+
+ err = mlx5_activate_lag(ldev, NULL, MLX5_LAG_MODE_MPESW, false);
if (err)
mlx5_core_warn(dev, "Failed to create LAG in MPESW mode (%d)\n", err);
--
2.36.1
Powered by blists - more mailing lists