| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 11 Jul 2022 12:05:14 -0400
From: Sean Anderson <sean.anderson@...o.com>
To: Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>, netdev@...r.kernel.org
Cc: Jakub Kicinski <kuba@...nel.org>,
Madalin Bucur <madalin.bucur@....com>,
"David S . Miller" <davem@...emloft.net>,
Paolo Abeni <pabeni@...hat.com>,
Ioana Ciornei <ioana.ciornei@....com>,
linux-kernel@...r.kernel.org, Eric Dumazet <edumazet@...gle.com>,
Andrew Lunn <andrew@...n.ch>,
Sean Anderson <sean.anderson@...o.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Claudiu Manoil <claudiu.manoil@....com>,
Florian Fainelli <f.fainelli@...il.com>,
UNGLinuxDriver@...rochip.com,
Vivien Didelot <vivien.didelot@...il.com>,
Vladimir Oltean <vladimir.oltean@....com>
Subject: [RFC PATCH net-next 4/9] net: pcs: lynx: Convert to an mdio driver
This converts the lynx PCS driver to a proper MDIO driver. This allows
using a more conventional driver lifecycle (e.g. with a probe and
remove). For compatibility with existing device trees lacking a
compatible property, we bind the driver in lynx_pcs_create. This is
intended only as a transitional method. After compatible properties are
added to all existing device trees (and a reasonable amount of time has
passed), then lynx_pcs_create can be removed, and users can be converted
to pcs_get_fwnode.
Signed-off-by: Sean Anderson <sean.anderson@...o.com>
---
drivers/net/dsa/ocelot/Kconfig | 2 +
drivers/net/dsa/ocelot/felix_vsc9959.c | 2 +-
drivers/net/dsa/ocelot/seville_vsc9953.c | 2 +-
drivers/net/ethernet/freescale/dpaa2/Kconfig | 1 +
.../net/ethernet/freescale/dpaa2/dpaa2-mac.c | 4 +-
drivers/net/ethernet/freescale/enetc/Kconfig | 1 +
.../net/ethernet/freescale/enetc/enetc_pf.c | 4 +-
drivers/net/pcs/Kconfig | 11 +++-
drivers/net/pcs/pcs-lynx.c | 65 +++++++++++++++----
9 files changed, 72 insertions(+), 20 deletions(-)
diff --git a/drivers/net/dsa/ocelot/Kconfig b/drivers/net/dsa/ocelot/Kconfig
index 220b0b027b55..cbb0ced3f37d 100644
--- a/drivers/net/dsa/ocelot/Kconfig
+++ b/drivers/net/dsa/ocelot/Kconfig
@@ -10,6 +10,7 @@ config NET_DSA_MSCC_FELIX
select NET_DSA_TAG_OCELOT_8021Q
select NET_DSA_TAG_OCELOT
select FSL_ENETC_MDIO
+ select PCS
select PCS_LYNX
help
This driver supports the VSC9959 (Felix) switch, which is embedded as
@@ -25,6 +26,7 @@ config NET_DSA_MSCC_SEVILLE
select MSCC_OCELOT_SWITCH_LIB
select NET_DSA_TAG_OCELOT_8021Q
select NET_DSA_TAG_OCELOT
+ select PCS
select PCS_LYNX
help
This driver supports the VSC9953 (Seville) switch, which is embedded
diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 570d0204b7be..57634e2296c0 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -1094,7 +1094,7 @@ static int vsc9959_mdio_bus_alloc(struct ocelot *ocelot)
continue;
phylink_pcs = lynx_pcs_create(mdio_device);
- if (!phylink_pcs) {
+ if (IS_ERR(phylink_pcs)) {
mdio_device_free(mdio_device);
continue;
}
diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/ocelot/seville_vsc9953.c
index ea0649211356..8c52de5d0b02 100644
--- a/drivers/net/dsa/ocelot/seville_vsc9953.c
+++ b/drivers/net/dsa/ocelot/seville_vsc9953.c
@@ -1049,7 +1049,7 @@ static int vsc9953_mdio_bus_alloc(struct ocelot *ocelot)
continue;
phylink_pcs = lynx_pcs_create(mdio_device);
- if (!phylink_pcs) {
+ if (IS_ERR(phylink_pcs)) {
mdio_device_free(mdio_device);
continue;
}
diff --git a/drivers/net/ethernet/freescale/dpaa2/Kconfig b/drivers/net/ethernet/freescale/dpaa2/Kconfig
index d029b69c3f18..2648e9fb6e13 100644
--- a/drivers/net/ethernet/freescale/dpaa2/Kconfig
+++ b/drivers/net/ethernet/freescale/dpaa2/Kconfig
@@ -3,6 +3,7 @@ config FSL_DPAA2_ETH
tristate "Freescale DPAA2 Ethernet"
depends on FSL_MC_BUS && FSL_MC_DPIO
select PHYLINK
+ select PCS
select PCS_LYNX
select FSL_XGMAC_MDIO
select NET_DEVLINK
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
index c9bee9a0c9b2..e82c0d23eeb5 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
@@ -268,10 +268,10 @@ static int dpaa2_pcs_create(struct dpaa2_mac *mac,
return -EPROBE_DEFER;
mac->pcs = lynx_pcs_create(mdiodev);
- if (!mac->pcs) {
+ if (IS_ERR(mac->pcs)) {
netdev_err(mac->net_dev, "lynx_pcs_create() failed\n");
put_device(&mdiodev->dev);
- return -ENOMEM;
+ return PTR_ERR(mac->pcs);
}
return 0;
diff --git a/drivers/net/ethernet/freescale/enetc/Kconfig b/drivers/net/ethernet/freescale/enetc/Kconfig
index cdc0ff89388a..c7dcdeb9a333 100644
--- a/drivers/net/ethernet/freescale/enetc/Kconfig
+++ b/drivers/net/ethernet/freescale/enetc/Kconfig
@@ -5,6 +5,7 @@ config FSL_ENETC
select FSL_ENETC_IERB
select FSL_ENETC_MDIO
select PHYLINK
+ select PCS
select PCS_LYNX
select DIMLIB
help
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
index c4a0e836d4f0..8c923a93da88 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
@@ -859,9 +859,9 @@ static int enetc_imdio_create(struct enetc_pf *pf)
}
phylink_pcs = lynx_pcs_create(mdio_device);
- if (!phylink_pcs) {
+ if (IS_ERR(phylink_pcs)) {
mdio_device_free(mdio_device);
- err = -ENOMEM;
+ err = PTR_ERR(phylink_pcs);
dev_err(dev, "cannot create lynx pcs (%d)\n", err);
goto unregister_mdiobus;
}
diff --git a/drivers/net/pcs/Kconfig b/drivers/net/pcs/Kconfig
index fed6264fdf33..a225176f92e8 100644
--- a/drivers/net/pcs/Kconfig
+++ b/drivers/net/pcs/Kconfig
@@ -25,9 +25,14 @@ config PCS_XPCS
controllers.
config PCS_LYNX
- tristate
+ tristate "NXP Lynx PCS driver"
+ depends on PCS && MDIO_DEVICE
help
- This module provides helpers to phylink for managing the Lynx PCS
- which is part of the Layerscape and QorIQ Ethernet SERDES.
+ This module provides driver support for the PCSs in Lynx 10g and 28g
+ SerDes devices. These devices are present in NXP QorIQ SoCs,
+ including the Layerscape series.
+
+ If you want to use Ethernet on a QorIQ SoC, say "Y". If compiled as a
+ module, it will be called "pcs-lynx".
endmenu
diff --git a/drivers/net/pcs/pcs-lynx.c b/drivers/net/pcs/pcs-lynx.c
index fd3445374955..8272072698e4 100644
--- a/drivers/net/pcs/pcs-lynx.c
+++ b/drivers/net/pcs/pcs-lynx.c
@@ -1,11 +1,14 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/* Copyright 2020 NXP
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (C) 2022 Sean Anderson <seanga2@...il.com>
+ * Copyright 2020 NXP
* Lynx PCS MDIO helpers
*/
#include <linux/mdio.h>
-#include <linux/phylink.h>
+#include <linux/of.h>
+#include <linux/pcs.h>
#include <linux/pcs-lynx.h>
+#include <linux/phylink.h>
#define SGMII_CLOCK_PERIOD_NS 8 /* PCS is clocked at 125 MHz */
#define LINK_TIMER_VAL(ns) ((u32)((ns) / SGMII_CLOCK_PERIOD_NS))
@@ -337,34 +340,74 @@ static void lynx_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
}
static const struct phylink_pcs_ops lynx_pcs_phylink_ops = {
+ .owner = THIS_MODULE,
.pcs_get_state = lynx_pcs_get_state,
.pcs_config = lynx_pcs_config,
.pcs_an_restart = lynx_pcs_an_restart,
.pcs_link_up = lynx_pcs_link_up,
};
-struct phylink_pcs *lynx_pcs_create(struct mdio_device *mdio)
+static int lynx_pcs_probe(struct mdio_device *mdio)
{
+ struct device *dev = &mdio->dev;
struct lynx_pcs *lynx;
+ int ret;
- lynx = kzalloc(sizeof(*lynx), GFP_KERNEL);
+ lynx = devm_kzalloc(dev, sizeof(*lynx), GFP_KERNEL);
if (!lynx)
- return NULL;
+ return -ENOMEM;
lynx->mdio = mdio;
+ lynx->pcs.dev = dev;
lynx->pcs.ops = &lynx_pcs_phylink_ops;
lynx->pcs.poll = true;
- return lynx_to_phylink_pcs(lynx);
+ ret = devm_pcs_register(dev, &lynx->pcs);
+ if (ret)
+ return dev_err_probe(dev, ret, "could not register PCS\n");
+ dev_info(dev, "probed\n");
+ return 0;
+}
+
+static const struct of_device_id lynx_pcs_of_match[] = {
+ { .compatible = "fsl,lynx-pcs" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, lynx_pcs_of_match);
+
+static struct mdio_driver lynx_pcs_driver = {
+ .probe = lynx_pcs_probe,
+ .mdiodrv.driver = {
+ .name = "lynx-pcs",
+ .of_match_table = of_match_ptr(lynx_pcs_of_match),
+ },
+};
+mdio_module_driver(lynx_pcs_driver);
+
+struct phylink_pcs *lynx_pcs_create(struct mdio_device *mdio)
+{
+ struct device *dev = &mdio->dev;
+ int err;
+
+ /* For compatibility with device trees lacking compatible strings, we
+ * bind the device manually here.
+ */
+ err = device_driver_attach(&lynx_pcs_driver.mdiodrv.driver, dev);
+ if (err && err != -EBUSY) {
+ if (err == -EAGAIN)
+ err = -EPROBE_DEFER;
+ return ERR_PTR(err);
+ }
+
+ return pcs_get_by_provider(&mdio->dev);
}
EXPORT_SYMBOL(lynx_pcs_create);
void lynx_pcs_destroy(struct phylink_pcs *pcs)
{
- struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
-
- kfree(lynx);
+ pcs_put(pcs);
}
EXPORT_SYMBOL(lynx_pcs_destroy);
-MODULE_LICENSE("Dual BSD/GPL");
+MODULE_DESCRIPTION("NXP Lynx 10G/28G PCS driver");
+MODULE_LICENSE("GPL");
--
2.35.1.1320.gc452695387.dirty
Powered by blists - more mailing lists