| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220722175313.112518-2-anthony.l.nguyen@intel.com>
Date: Fri, 22 Jul 2022 10:53:12 -0700
From: Tony Nguyen <anthony.l.nguyen@...el.com>
To: davem@...emloft.net, kuba@...nel.org, pabeni@...hat.com,
edumazet@...gle.com
Cc: Przemyslaw Patynowski <przemyslawx.patynowski@...el.com>,
netdev@...r.kernel.org, anthony.l.nguyen@...el.com,
Jan Sokolowski <jan.sokolowski@...el.com>,
Bharathi Sreenivas <bharathi.sreenivas@...el.com>
Subject: [PATCH net-next 1/2] i40e: Refactor tc mqprio checks
From: Przemyslaw Patynowski <przemyslawx.patynowski@...el.com>
Refactor bitwise checks for whether TC MQPRIO is enabled
into one single method for improved readability.
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@...el.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@...el.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@...el.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@...el.com>
---
drivers/net/ethernet/intel/i40e/i40e.h | 14 +++++++++++++
.../net/ethernet/intel/i40e/i40e_ethtool.c | 2 +-
drivers/net/ethernet/intel/i40e/i40e_main.c | 20 +++++++++----------
3 files changed, 25 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 97c574a33ba0..d86b6d349ea9 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -1292,4 +1292,18 @@ int i40e_add_del_cloud_filter(struct i40e_vsi *vsi,
int i40e_add_del_cloud_filter_big_buf(struct i40e_vsi *vsi,
struct i40e_cloud_filter *filter,
bool add);
+
+/**
+ * i40e_is_tc_mqprio_enabled - check if TC MQPRIO is enabled on PF
+ * @pf: pointer to a pf.
+ *
+ * Check and return value of flag I40E_FLAG_TC_MQPRIO.
+ *
+ * Return: I40E_FLAG_TC_MQPRIO set state.
+ **/
+static inline u32 i40e_is_tc_mqprio_enabled(struct i40e_pf *pf)
+{
+ return pf->flags & I40E_FLAG_TC_MQPRIO;
+}
+
#endif /* _I40E_H_ */
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index d9a934ca3eba..156e92c43780 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -5021,7 +5021,7 @@ static int i40e_set_channels(struct net_device *dev,
/* We do not support setting channels via ethtool when TCs are
* configured through mqprio
*/
- if (pf->flags & I40E_FLAG_TC_MQPRIO)
+ if (i40e_is_tc_mqprio_enabled(pf))
return -EINVAL;
/* verify they are not requesting separate vectors */
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index fe6f25537110..fb9f476fb33c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -5456,7 +5456,7 @@ static u8 i40e_pf_get_num_tc(struct i40e_pf *pf)
u8 num_tc = 0;
struct i40e_dcbx_config *dcbcfg = &hw->local_dcbx_config;
- if (pf->flags & I40E_FLAG_TC_MQPRIO)
+ if (i40e_is_tc_mqprio_enabled(pf))
return pf->vsi[pf->lan_vsi]->mqprio_qopt.qopt.num_tc;
/* If neither MQPRIO nor DCB is enabled, then always use single TC */
@@ -5488,7 +5488,7 @@ static u8 i40e_pf_get_num_tc(struct i40e_pf *pf)
**/
static u8 i40e_pf_get_tc_map(struct i40e_pf *pf)
{
- if (pf->flags & I40E_FLAG_TC_MQPRIO)
+ if (i40e_is_tc_mqprio_enabled(pf))
return i40e_mqprio_get_enabled_tc(pf);
/* If neither MQPRIO nor DCB is enabled for this PF then just return
@@ -5585,7 +5585,7 @@ static int i40e_vsi_configure_bw_alloc(struct i40e_vsi *vsi, u8 enabled_tc,
int i;
/* There is no need to reset BW when mqprio mode is on. */
- if (pf->flags & I40E_FLAG_TC_MQPRIO)
+ if (i40e_is_tc_mqprio_enabled(pf))
return 0;
if (!vsi->mqprio_qopt.qopt.hw && !(pf->flags & I40E_FLAG_DCB_ENABLED)) {
ret = i40e_set_bw_limit(vsi, vsi->seid, 0);
@@ -5657,7 +5657,7 @@ static void i40e_vsi_config_netdev_tc(struct i40e_vsi *vsi, u8 enabled_tc)
vsi->tc_config.tc_info[i].qoffset);
}
- if (pf->flags & I40E_FLAG_TC_MQPRIO)
+ if (i40e_is_tc_mqprio_enabled(pf))
return;
/* Assign UP2TC map for the VSI */
@@ -5818,7 +5818,7 @@ static int i40e_vsi_config_tc(struct i40e_vsi *vsi, u8 enabled_tc)
ctxt.vf_num = 0;
ctxt.uplink_seid = vsi->uplink_seid;
ctxt.info = vsi->info;
- if (vsi->back->flags & I40E_FLAG_TC_MQPRIO) {
+ if (i40e_is_tc_mqprio_enabled(pf)) {
ret = i40e_vsi_setup_queue_map_mqprio(vsi, &ctxt, enabled_tc);
if (ret)
goto out;
@@ -6542,7 +6542,7 @@ int i40e_create_queue_channel(struct i40e_vsi *vsi,
pf->flags |= I40E_FLAG_VEB_MODE_ENABLED;
if (vsi->type == I40E_VSI_MAIN) {
- if (pf->flags & I40E_FLAG_TC_MQPRIO)
+ if (i40e_is_tc_mqprio_enabled(pf))
i40e_do_reset(pf, I40E_PF_RESET_FLAG, true);
else
i40e_do_reset_safe(pf, I40E_PF_RESET_FLAG);
@@ -7936,7 +7936,7 @@ static void *i40e_fwd_add(struct net_device *netdev, struct net_device *vdev)
netdev_info(netdev, "Macvlans are not supported when DCB is enabled\n");
return ERR_PTR(-EINVAL);
}
- if ((pf->flags & I40E_FLAG_TC_MQPRIO)) {
+ if (i40e_is_tc_mqprio_enabled(pf)) {
netdev_info(netdev, "Macvlans are not supported when HW TC offload is on\n");
return ERR_PTR(-EINVAL);
}
@@ -8189,7 +8189,7 @@ static int i40e_setup_tc(struct net_device *netdev, void *type_data)
/* Quiesce VSI queues */
i40e_quiesce_vsi(vsi);
- if (!hw && !(pf->flags & I40E_FLAG_TC_MQPRIO))
+ if (!hw && !i40e_is_tc_mqprio_enabled(pf))
i40e_remove_queue_channels(vsi);
/* Configure VSI for enabled TCs */
@@ -8213,7 +8213,7 @@ static int i40e_setup_tc(struct net_device *netdev, void *type_data)
"Setup channel (id:%u) utilizing num_queues %d\n",
vsi->seid, vsi->tc_config.tc_info[0].qcount);
- if (pf->flags & I40E_FLAG_TC_MQPRIO) {
+ if (i40e_is_tc_mqprio_enabled(pf)) {
if (vsi->mqprio_qopt.max_rate[0]) {
u64 max_tx_rate = vsi->mqprio_qopt.max_rate[0];
@@ -10867,7 +10867,7 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired)
* unless I40E_FLAG_TC_MQPRIO was enabled or DCB
* is not supported with new link speed
*/
- if (pf->flags & I40E_FLAG_TC_MQPRIO) {
+ if (i40e_is_tc_mqprio_enabled(pf)) {
i40e_aq_set_dcb_parameters(hw, false, NULL);
} else {
if (I40E_IS_X710TL_DEVICE(hw->device_id) &&
--
2.35.1
Powered by blists - more mailing lists