[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220724092823.24567-1-arun.ramadoss@microchip.com>
Date: Sun, 24 Jul 2022 14:58:14 +0530
From: Arun Ramadoss <arun.ramadoss@...rochip.com>
To: <linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>
CC: Woojung Huh <woojung.huh@...rochip.com>,
<UNGLinuxDriver@...rochip.com>, Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
"Russell King" <linux@...linux.org.uk>
Subject: [Patch net-next v2 0/9] net: dsa: microchip: add support for phylink mac config and link up
This patch series add support common phylink mac config and link up for the ksz
series switches. At present, ksz8795 and ksz9477 doesn't implement the phylink
mac config and link up. It configures the mac interface in the port setup hook.
ksz8830 series switch does not mac link configuration. For lan937x switches, in
the part support patch series has support only for MII and RMII configuration.
Some group of switches have some register address and bit fields common and
others are different. So, this patch aims to have common phylink implementation
which configures the register based on the chip id.
Changes in v2
- combined the modification of duplex, tx_pause and rx_pause into single
function.
Changes in v1
- Squash the reading rgmii value from dt to patch which apply the rgmii value
- Created the new function ksz_port_set_xmii_speed
- Seperated the namespace values for xmii_ctrl_0 and xmii_ctrl_1 register
- Applied the rgmii delay value based on the rx/tx-internal-delay-ps
Arun Ramadoss (9):
net: dsa: microchip: add common gigabit set and get function
net: dsa: microchip: add common ksz port xmii speed selection function
net: dsa: microchip: add common duplex and flow control function
net: dsa: microchip: add support for common phylink mac link up
net: dsa: microchip: lan937x: add support for configuing xMII register
net: dsa: microchip: apply rgmii tx and rx delay in phylink mac config
net: dsa: microchip: ksz9477: use common xmii function
net: dsa: microchip: ksz8795: use common xmii function
net: dsa: microchip: add support for phylink mac config
drivers/net/dsa/microchip/ksz8795.c | 40 ---
drivers/net/dsa/microchip/ksz8795_reg.h | 8 -
drivers/net/dsa/microchip/ksz9477.c | 183 +------------
drivers/net/dsa/microchip/ksz9477_reg.h | 24 --
drivers/net/dsa/microchip/ksz_common.c | 312 ++++++++++++++++++++++-
drivers/net/dsa/microchip/ksz_common.h | 54 ++++
drivers/net/dsa/microchip/lan937x.h | 8 +-
drivers/net/dsa/microchip/lan937x_main.c | 125 +++------
drivers/net/dsa/microchip/lan937x_reg.h | 32 ++-
9 files changed, 431 insertions(+), 355 deletions(-)
base-commit: 502c6f8cedcce7889ccdefeb88ce36b39acd522f
--
2.36.1
Powered by blists - more mailing lists