[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220730115758.16787-5-naveenm@marvell.com>
Date: Sat, 30 Jul 2022 17:27:58 +0530
From: Naveen Mamindlapalli <naveenm@...vell.com>
To: <davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, <richardcochran@...il.com>,
<netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<sgoutham@...vell.com>
CC: Naveen Mamindlapalli <naveenm@...vell.com>
Subject: [net-next PATCH v2 4/4] octeontx2-af: Initialize PTP_SEC_ROLLOVER register properly
Since the reset value of PTP_SEC_ROLLOVER is incorrect on
CNF10KB silicon, the ptp timestamps are inaccurate. This
patch initializes the PTP_SEC_ROLLOVER register properly
for the CNF10KB silicon.
Signed-off-by: Naveen Mamindlapalli <naveenm@...vell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@...vell.com>
---
drivers/net/ethernet/marvell/octeontx2/af/ptp.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/ptp.c b/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
index 01f7dbad6b92..3411e2e47d46 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
@@ -52,12 +52,18 @@
#define PTP_CLOCK_COMP 0xF18ULL
#define PTP_TIMESTAMP 0xF20ULL
#define PTP_CLOCK_SEC 0xFD0ULL
+#define PTP_SEC_ROLLOVER 0xFD8ULL
#define CYCLE_MULT 1000
static struct ptp *first_ptp_block;
static const struct pci_device_id ptp_id_table[];
+static bool is_ptp_dev_cnf10kb(struct ptp *ptp)
+{
+ return (ptp->pdev->subsystem_device == PCI_SUBSYS_DEVID_CNF10K_B_PTP) ? true : false;
+}
+
static bool is_ptp_dev_cn10k(struct ptp *ptp)
{
return (ptp->pdev->device == PCI_DEVID_CN10K_PTP) ? true : false;
@@ -290,6 +296,10 @@ void ptp_start(struct ptp *ptp, u64 sclk, u32 ext_clk_freq, u32 extts)
/* sclk is in MHz */
ptp->clock_rate = sclk * 1000000;
+ /* Program the seconds rollover value to 1 second */
+ if (is_ptp_dev_cnf10kb(ptp))
+ writeq(0x3b9aca00, ptp->reg_base + PTP_SEC_ROLLOVER);
+
/* Enable PTP clock */
clock_cfg = readq(ptp->reg_base + PTP_CLOCK_CFG);
--
2.16.5
Powered by blists - more mailing lists