netdev - [PATCH] arm64: dts: ls1028a-qds-65bb: don't use in-band autoneg for 2500base-x

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220802135006.4184820-1-vladimir.oltean@nxp.com>
Date:   Tue,  2 Aug 2022 16:50:06 +0300
From:   Vladimir Oltean <vladimir.oltean@....com>
To:     devicetree@...r.kernel.org
Cc:     Shawn Guo <shawnguo@...nel.org>, Li Yang <leoyang.li@....com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Claudiu Manoil <claudiu.manoil@....com>,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        netdev@...r.kernel.org
Subject: [PATCH] arm64: dts: ls1028a-qds-65bb: don't use in-band autoneg for 2500base-x

The Lynx PCS integrated with ENETC port 0 does not support in-band
autoneg for the 2500base-x SERDES protocol, and prints errors from its
phylink methods. Furthermore, the AQR112 card used for these boards does
not expect in-band autoneg either. So delete the extraneous property.

Fixes: e426d63e752b ("arm64: dts: ls1028a-qds: add overlays for various serdes protocols")
Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
index 40d34c8384a5..b949cac03742 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
@@ -25,7 +25,6 @@ slot1_sgmii: ethernet-phy@2 {
 &enetc_port0 {
 	phy-handle = <&slot1_sgmii>;
 	phy-mode = "2500base-x";
-	managed = "in-band-status";
 	status = "okay";
 };
 
-- 
2.34.1