| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220810085532.246613-9-jiawenwu@trustnetic.com>
Date: Wed, 10 Aug 2022 16:55:24 +0800
From: Jiawen Wu <jiawenwu@...stnetic.com>
To: netdev@...r.kernel.org
Cc: Jiawen Wu <jiawenwu@...stnetic.com>
Subject: [RFC PATCH net-next 08/16] net: txgbe: Add interrupt support
Determine proper interrupt scheme based on kernel support and
hardware queue count. Allocate memory for interrupt vectors.
Signed-off-by: Jiawen Wu <jiawenwu@...stnetic.com>
---
drivers/net/ethernet/wangxun/txgbe/Makefile | 3 +-
drivers/net/ethernet/wangxun/txgbe/txgbe.h | 128 +++++
drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c | 35 ++
drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h | 1 +
.../net/ethernet/wangxun/txgbe/txgbe_lib.c | 435 ++++++++++++++++
.../net/ethernet/wangxun/txgbe/txgbe_main.c | 480 +++++++++++++++++-
.../net/ethernet/wangxun/txgbe/txgbe_type.h | 131 +++++
7 files changed, 1211 insertions(+), 2 deletions(-)
create mode 100644 drivers/net/ethernet/wangxun/txgbe/txgbe_lib.c
diff --git a/drivers/net/ethernet/wangxun/txgbe/Makefile b/drivers/net/ethernet/wangxun/txgbe/Makefile
index 875704a29c4c..0111fda0e784 100644
--- a/drivers/net/ethernet/wangxun/txgbe/Makefile
+++ b/drivers/net/ethernet/wangxun/txgbe/Makefile
@@ -7,4 +7,5 @@
obj-$(CONFIG_TXGBE) += txgbe.o
txgbe-objs := txgbe_main.o \
- txgbe_hw.o txgbe_phy.o
+ txgbe_hw.o txgbe_phy.o \
+ txgbe_lib.o
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe.h b/drivers/net/ethernet/wangxun/txgbe/txgbe.h
index 0f06efbcfef5..a4ebc58a984b 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe.h
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe.h
@@ -12,6 +12,13 @@
#include "txgbe_type.h"
struct txgbe_ring {
+ struct txgbe_ring *next; /* pointer to next ring in q_vector */
+ struct txgbe_q_vector *q_vector; /* backpointer to host q_vector */
+ struct net_device *netdev; /* netdev ring belongs to */
+ struct device *dev; /* device for DMA mapping */
+ u16 count; /* amount of descriptors */
+
+ u8 queue_index; /* needed for multiqueue queue management */
u8 reg_idx;
} ____cacheline_internodealigned_in_smp;
@@ -20,6 +27,52 @@ struct txgbe_ring {
#define TXGBE_MAX_RX_QUEUES (TXGBE_MAX_FDIR_INDICES + 1)
#define TXGBE_MAX_TX_QUEUES (TXGBE_MAX_FDIR_INDICES + 1)
+struct txgbe_ring_container {
+ struct txgbe_ring *ring; /* pointer to linked list of rings */
+ u16 work_limit; /* total work allowed per interrupt */
+ u8 count; /* total number of rings in vector */
+};
+
+/* iterator for handling rings in ring container */
+#define txgbe_for_each_ring(pos, head) \
+ for (pos = (head).ring; pos; pos = pos->next)
+
+/* MAX_MSIX_Q_VECTORS of these are allocated,
+ * but we only use one per queue-specific vector.
+ */
+struct txgbe_q_vector {
+ struct txgbe_adapter *adapter;
+ int cpu;
+ u16 v_idx; /* index of q_vector within array, also used for
+ * finding the bit in EICR and friends that
+ * represents the vector for this ring
+ */
+ u16 itr; /* Interrupt throttle rate written to EITR */
+ struct txgbe_ring_container rx, tx;
+
+ cpumask_t affinity_mask;
+ int numa_node;
+ struct rcu_head rcu; /* to avoid race with update stats on free */
+ char name[IFNAMSIZ + 17];
+
+ /* for dynamic allocation of rings associated with this q_vector */
+ struct txgbe_ring ring[0] ____cacheline_internodealigned_in_smp;
+};
+
+/* microsecond values for various ITR rates shifted by 2 to fit itr register
+ * with the first 3 bits reserved 0
+ */
+#define TXGBE_100K_ITR 40
+#define TXGBE_20K_ITR 200
+#define TXGBE_16K_ITR 248
+#define TXGBE_12K_ITR 336
+
+#define TCP_TIMER_VECTOR 0
+#define OTHER_VECTOR 1
+#define NON_Q_VECTORS (OTHER_VECTOR + TCP_TIMER_VECTOR)
+
+#define TXGBE_MAX_MSIX_Q_VECTORS_SAPPHIRE 64
+
struct txgbe_mac_addr {
u8 addr[ETH_ALEN];
u16 state; /* bitmask */
@@ -30,6 +83,12 @@ struct txgbe_mac_addr {
#define TXGBE_MAC_STATE_MODIFIED 0x2
#define TXGBE_MAC_STATE_IN_USE 0x4
+#define MAX_MSIX_Q_VECTORS TXGBE_MAX_MSIX_Q_VECTORS_SAPPHIRE
+#define MAX_MSIX_COUNT TXGBE_MAX_MSIX_VECTORS_SAPPHIRE
+
+#define MIN_MSIX_Q_VECTORS 1
+#define MIN_MSIX_COUNT (MIN_MSIX_Q_VECTORS + NON_Q_VECTORS)
+
/* default to trying for four seconds */
#define TXGBE_TRY_LINK_TIMEOUT (4 * HZ)
#define TXGBE_SFP_POLL_JIFFIES (2 * HZ) /* SFP poll every 2 seconds */
@@ -39,6 +98,8 @@ struct txgbe_mac_addr {
**/
#define TXGBE_FLAG_NEED_LINK_UPDATE BIT(0)
#define TXGBE_FLAG_NEED_LINK_CONFIG BIT(1)
+#define TXGBE_FLAG_MSI_ENABLED BIT(2)
+#define TXGBE_FLAG_MSIX_ENABLED BIT(3)
/**
* txgbe_adapter.flag2
@@ -46,6 +107,14 @@ struct txgbe_mac_addr {
#define TXGBE_FLAG2_MNG_REG_ACCESS_DISABLED BIT(0)
#define TXGBE_FLAG2_SFP_NEEDS_RESET BIT(1)
+enum txgbe_isb_idx {
+ TXGBE_ISB_HEADER,
+ TXGBE_ISB_MISC,
+ TXGBE_ISB_VEC0,
+ TXGBE_ISB_VEC1,
+ TXGBE_ISB_MAX
+};
+
/* board specific private data structure */
struct txgbe_adapter {
u8 __iomem *io_addr; /* Mainly for iounmap use */
@@ -59,14 +128,30 @@ struct txgbe_adapter {
u32 flags2;
/* Tx fast path data */
int num_tx_queues;
+ u16 tx_itr_setting;
+
+ /* Rx fast path data */
+ int num_rx_queues;
+ u16 rx_itr_setting;
/* TX */
struct txgbe_ring *tx_ring[TXGBE_MAX_TX_QUEUES] ____cacheline_aligned_in_smp;
+ /* RX */
+ struct txgbe_ring *rx_ring[TXGBE_MAX_RX_QUEUES];
+ struct txgbe_q_vector *q_vector[MAX_MSIX_Q_VECTORS];
+
+ int num_q_vectors; /* current number of q_vectors for device */
+ int max_q_vectors; /* upper limit of q_vectors for device */
+ struct msix_entry *msix_entries;
+
/* structs defined in txgbe_type.h */
struct txgbe_hw hw;
u16 msg_enable;
+ unsigned int tx_ring_count;
+ unsigned int rx_ring_count;
+
u32 link_speed;
bool link_up;
unsigned long sfp_poll_time;
@@ -80,8 +165,24 @@ struct txgbe_adapter {
struct txgbe_mac_addr *mac_table;
+ /* misc interrupt status block */
+ dma_addr_t isb_dma;
+ u32 *isb_mem;
+ u32 isb_tag[TXGBE_ISB_MAX];
};
+static inline u32 txgbe_misc_isb(struct txgbe_adapter *adapter,
+ enum txgbe_isb_idx idx)
+{
+ u32 cur_tag = 0;
+
+ cur_tag = adapter->isb_mem[TXGBE_ISB_HEADER];
+
+ adapter->isb_tag[idx] = cur_tag;
+
+ return adapter->isb_mem[idx];
+}
+
enum txgbe_state_t {
__TXGBE_TESTING,
__TXGBE_RESETTING,
@@ -98,14 +199,41 @@ enum txgbe_state_t {
void txgbe_service_event_schedule(struct txgbe_adapter *adapter);
void txgbe_assign_netdev_ops(struct net_device *netdev);
+void txgbe_irq_disable(struct txgbe_adapter *adapter);
+void txgbe_irq_enable(struct txgbe_adapter *adapter, bool queues, bool flush);
int txgbe_open(struct net_device *netdev);
int txgbe_close(struct net_device *netdev);
void txgbe_down(struct txgbe_adapter *adapter);
void txgbe_reset(struct txgbe_adapter *adapter);
s32 txgbe_init_shared_code(struct txgbe_hw *hw);
void txgbe_disable_device(struct txgbe_adapter *adapter);
+int txgbe_init_interrupt_scheme(struct txgbe_adapter *adapter);
+void txgbe_reset_interrupt_capability(struct txgbe_adapter *adapter);
+void txgbe_set_interrupt_capability(struct txgbe_adapter *adapter);
+void txgbe_clear_interrupt_scheme(struct txgbe_adapter *adapter);
+void txgbe_write_eitr(struct txgbe_q_vector *q_vector);
+/**
+ * interrupt masking operations. each bit in PX_ICn correspond to a interrupt.
+ * disable a interrupt by writing to PX_IMS with the corresponding bit=1
+ * enable a interrupt by writing to PX_IMC with the corresponding bit=1
+ * trigger a interrupt by writing to PX_ICS with the corresponding bit=1
+ **/
#define TXGBE_INTR_ALL (~0ULL)
+#define TXGBE_INTR_MISC(A) (1ULL << (A)->num_q_vectors)
+#define TXGBE_INTR_QALL(A) (TXGBE_INTR_MISC(A) - 1)
+#define TXGBE_INTR_Q(i) (1ULL << (i))
+static inline void txgbe_intr_enable(struct txgbe_hw *hw, u64 qmask)
+{
+ u32 mask;
+
+ mask = (qmask & 0xFFFFFFFF);
+ if (mask)
+ wr32(hw, TXGBE_PX_IMC(0), mask);
+ mask = (qmask >> 32);
+ if (mask)
+ wr32(hw, TXGBE_PX_IMC(1), mask);
+}
static inline void txgbe_intr_disable(struct txgbe_hw *hw, u64 qmask)
{
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c
index 89a67b158fa5..8dd0dec41971 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c
@@ -57,6 +57,40 @@ void txgbe_wr32_epcs(struct txgbe_hw *hw, u32 addr, u32 data)
wr32(hw, offset, data);
}
+/**
+ * txgbe_get_pcie_msix_count - Gets MSI-X vector count
+ * @hw: pointer to hardware structure
+ *
+ * Read PCIe configuration space, and get the MSI-X vector count from
+ * the capabilities table.
+ **/
+u16 txgbe_get_pcie_msix_count(struct txgbe_hw *hw)
+{
+ struct txgbe_adapter *adapter = container_of(hw, struct txgbe_adapter, hw);
+ u16 msix_count = 1;
+ u16 max_msix_count;
+ u32 pos;
+
+ max_msix_count = TXGBE_MAX_MSIX_VECTORS_SAPPHIRE;
+ pos = pci_find_capability(adapter->pdev, PCI_CAP_ID_MSIX);
+ if (!pos)
+ return msix_count;
+ pci_read_config_word(adapter->pdev,
+ pos + PCI_MSIX_FLAGS, &msix_count);
+
+ if (TXGBE_REMOVED(hw->hw_addr))
+ msix_count = 0;
+ msix_count &= TXGBE_PCIE_MSIX_TBL_SZ_MASK;
+
+ /* MSI-X count is zero-based in HW */
+ msix_count++;
+
+ if (msix_count > max_msix_count)
+ msix_count = max_msix_count;
+
+ return msix_count;
+}
+
s32 txgbe_init_hw(struct txgbe_hw *hw)
{
s32 status;
@@ -1521,6 +1555,7 @@ s32 txgbe_init_ops(struct txgbe_hw *hw)
mac->num_rar_entries = TXGBE_SP_RAR_ENTRIES;
mac->max_rx_queues = TXGBE_SP_MAX_RX_QUEUES;
mac->max_tx_queues = TXGBE_SP_MAX_TX_QUEUES;
+ mac->max_msix_vectors = txgbe_get_pcie_msix_count(hw);
/* EEPROM */
eeprom->ops.init_params = txgbe_init_eeprom_params;
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h
index d620c88f6318..d52c3b5775cc 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h
@@ -16,6 +16,7 @@
#define SPI_H_DAT_REG_ADDR 0x10108 /* SPI Data register address */
#define SPI_H_STA_REG_ADDR 0x1010c /* SPI Status register address */
+u16 txgbe_get_pcie_msix_count(struct txgbe_hw *hw);
s32 txgbe_init_hw(struct txgbe_hw *hw);
s32 txgbe_start_hw(struct txgbe_hw *hw);
s32 txgbe_read_pba_string(struct txgbe_hw *hw, u8 *pba_num,
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_lib.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_lib.c
new file mode 100644
index 000000000000..e7b6316e3b56
--- /dev/null
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_lib.c
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. */
+
+#include "txgbe.h"
+
+/**
+ * txgbe_cache_ring_register - Descriptor ring to register mapping
+ * @adapter: board private structure to initialize
+ *
+ * Once we know the feature-set enabled for the device, we'll cache
+ * the register offset the descriptor ring is assigned to.
+ *
+ * Note, the order the various feature calls is important. It must start with
+ * the "most" features enabled at the same time, then trickle down to the
+ * least amount of features turned on at once.
+ **/
+static void txgbe_cache_ring_register(struct txgbe_adapter *adapter)
+{
+ u16 i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ adapter->rx_ring[i]->reg_idx = i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ adapter->tx_ring[i]->reg_idx = i;
+}
+
+/**
+ * txgbe_set_num_queues: Allocate queues for device, feature dependent
+ * @adapter: board private structure to initialize
+ **/
+static void txgbe_set_num_queues(struct txgbe_adapter *adapter)
+{
+ /* Start with base case */
+ adapter->num_rx_queues = 1;
+ adapter->num_tx_queues = 1;
+}
+
+/**
+ * txgbe_acquire_msix_vectors - acquire MSI-X vectors
+ * @adapter: board private structure
+ *
+ * Attempts to acquire a suitable range of MSI-X vector interrupts. Will
+ * return a negative error code if unable to acquire MSI-X vectors for any
+ * reason.
+ */
+static int txgbe_acquire_msix_vectors(struct txgbe_adapter *adapter)
+{
+ struct txgbe_hw *hw = &adapter->hw;
+ int i, vectors, vector_threshold;
+
+ /* We start by asking for one vector per queue pair */
+ vectors = max(adapter->num_rx_queues, adapter->num_tx_queues);
+
+ /* It is easy to be greedy for MSI-X vectors. However, it really
+ * doesn't do much good if we have a lot more vectors than CPUs. We'll
+ * be somewhat conservative and only ask for (roughly) the same number
+ * of vectors as there are CPUs.
+ */
+ vectors = min_t(int, vectors, num_online_cpus());
+
+ /* Some vectors are necessary for non-queue interrupts */
+ vectors += NON_Q_VECTORS;
+
+ /* Hardware can only support a maximum of hw.mac->max_msix_vectors.
+ * With features such as RSS and VMDq, we can easily surpass the
+ * number of Rx and Tx descriptor queues supported by our device.
+ * Thus, we cap the maximum in the rare cases where the CPU count also
+ * exceeds our vector limit
+ */
+ vectors = min_t(int, vectors, hw->mac.max_msix_vectors);
+
+ /* We want a minimum of two MSI-X vectors for (1) a TxQ[0] + RxQ[0]
+ * handler, and (2) an Other (Link Status Change, etc.) handler.
+ */
+ vector_threshold = MIN_MSIX_COUNT;
+
+ adapter->msix_entries = kcalloc(vectors,
+ sizeof(struct msix_entry),
+ GFP_KERNEL);
+ if (!adapter->msix_entries)
+ return -ENOMEM;
+
+ for (i = 0; i < vectors; i++)
+ adapter->msix_entries[i].entry = i;
+
+ vectors = pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
+ vector_threshold, vectors);
+ if (vectors < 0) {
+ /* A negative count of allocated vectors indicates an error in
+ * acquiring within the specified range of MSI-X vectors
+ */
+ dev_warn(&adapter->pdev->dev,
+ "Failed to allocate MSI-X interrupts. Err: %d\n",
+ vectors);
+
+ adapter->flags &= ~TXGBE_FLAG_MSIX_ENABLED;
+ kfree(adapter->msix_entries);
+ adapter->msix_entries = NULL;
+
+ return vectors;
+ }
+
+ /* we successfully allocated some number of vectors within our
+ * requested range.
+ */
+ adapter->flags |= TXGBE_FLAG_MSIX_ENABLED;
+
+ /* Adjust for only the vectors we'll use, which is minimum
+ * of max_q_vectors, or the number of vectors we were allocated.
+ */
+ vectors -= NON_Q_VECTORS;
+ adapter->num_q_vectors = min_t(int, vectors, adapter->max_q_vectors);
+
+ return 0;
+}
+
+static void txgbe_add_ring(struct txgbe_ring *ring,
+ struct txgbe_ring_container *head)
+{
+ ring->next = head->ring;
+ head->ring = ring;
+ head->count++;
+}
+
+/**
+ * txgbe_alloc_q_vector - Allocate memory for a single interrupt vector
+ * @adapter: board private structure to initialize
+ * @v_count: q_vectors allocated on adapter, used for ring interleaving
+ * @v_idx: index of vector in adapter struct
+ * @txr_count: total number of Tx rings to allocate
+ * @txr_idx: index of first Tx ring to allocate
+ * @rxr_count: total number of Rx rings to allocate
+ * @rxr_idx: index of first Rx ring to allocate
+ *
+ * We allocate one q_vector. If allocation fails we return -ENOMEM.
+ **/
+static int txgbe_alloc_q_vector(struct txgbe_adapter *adapter,
+ unsigned int v_count, unsigned int v_idx,
+ unsigned int txr_count, unsigned int txr_idx,
+ unsigned int rxr_count, unsigned int rxr_idx)
+{
+ struct txgbe_q_vector *q_vector;
+ struct txgbe_ring *ring;
+ int node = -1;
+ int cpu = -1;
+ int ring_count, size;
+
+ /* note this will allocate space for the ring structure as well! */
+ ring_count = txr_count + rxr_count;
+ size = sizeof(struct txgbe_q_vector) +
+ (sizeof(struct txgbe_ring) * ring_count);
+
+ /* allocate q_vector and rings */
+ q_vector = kzalloc_node(size, GFP_KERNEL, node);
+ if (!q_vector)
+ q_vector = kzalloc(size, GFP_KERNEL);
+ if (!q_vector)
+ return -ENOMEM;
+
+ /* setup affinity mask and node */
+ if (cpu != -1)
+ cpumask_set_cpu(cpu, &q_vector->affinity_mask);
+ q_vector->numa_node = node;
+
+ /* initialize CPU for DCA */
+ q_vector->cpu = -1;
+
+ /* tie q_vector and adapter together */
+ adapter->q_vector[v_idx] = q_vector;
+ q_vector->adapter = adapter;
+ q_vector->v_idx = v_idx;
+
+ /* initialize pointer to rings */
+ ring = q_vector->ring;
+
+ /* initialize ITR */
+ if (txr_count && !rxr_count) {
+ /* tx only vector */
+ if (adapter->tx_itr_setting == 1)
+ q_vector->itr = TXGBE_12K_ITR;
+ else
+ q_vector->itr = adapter->tx_itr_setting;
+ } else {
+ /* rx or rx/tx vector */
+ if (adapter->rx_itr_setting == 1)
+ q_vector->itr = TXGBE_20K_ITR;
+ else
+ q_vector->itr = adapter->rx_itr_setting;
+ }
+
+ while (txr_count) {
+ /* assign generic ring traits */
+ ring->dev = &adapter->pdev->dev;
+ ring->netdev = adapter->netdev;
+
+ /* configure backlink on ring */
+ ring->q_vector = q_vector;
+
+ /* update q_vector Tx values */
+ txgbe_add_ring(ring, &q_vector->tx);
+
+ /* apply Tx specific ring traits */
+ ring->count = adapter->tx_ring_count;
+ ring->queue_index = txr_idx;
+
+ /* assign ring to adapter */
+ adapter->tx_ring[txr_idx] = ring;
+
+ /* update count and index */
+ txr_count--;
+ txr_idx += v_count;
+
+ /* push pointer to next ring */
+ ring++;
+ }
+
+ while (rxr_count) {
+ /* assign generic ring traits */
+ ring->dev = &adapter->pdev->dev;
+ ring->netdev = adapter->netdev;
+
+ /* configure backlink on ring */
+ ring->q_vector = q_vector;
+
+ /* update q_vector Rx values */
+ txgbe_add_ring(ring, &q_vector->rx);
+
+ /* apply Rx specific ring traits */
+ ring->count = adapter->rx_ring_count;
+ ring->queue_index = rxr_idx;
+
+ /* assign ring to adapter */
+ adapter->rx_ring[rxr_idx] = ring;
+
+ /* update count and index */
+ rxr_count--;
+ rxr_idx += v_count;
+
+ /* push pointer to next ring */
+ ring++;
+ }
+
+ return 0;
+}
+
+/**
+ * txgbe_free_q_vector - Free memory allocated for specific interrupt vector
+ * @adapter: board private structure to initialize
+ * @v_idx: Index of vector to be freed
+ *
+ * This function frees the memory allocated to the q_vector. In addition if
+ * NAPI is enabled it will delete any references to the NAPI struct prior
+ * to freeing the q_vector.
+ **/
+static void txgbe_free_q_vector(struct txgbe_adapter *adapter, int v_idx)
+{
+ struct txgbe_q_vector *q_vector = adapter->q_vector[v_idx];
+ struct txgbe_ring *ring;
+
+ txgbe_for_each_ring(ring, q_vector->tx)
+ adapter->tx_ring[ring->queue_index] = NULL;
+
+ txgbe_for_each_ring(ring, q_vector->rx)
+ adapter->rx_ring[ring->queue_index] = NULL;
+
+ adapter->q_vector[v_idx] = NULL;
+ kfree_rcu(q_vector, rcu);
+}
+
+/**
+ * txgbe_alloc_q_vectors - Allocate memory for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one q_vector per queue interrupt. If allocation fails we
+ * return -ENOMEM.
+ **/
+static int txgbe_alloc_q_vectors(struct txgbe_adapter *adapter)
+{
+ unsigned int q_vectors = adapter->num_q_vectors;
+ unsigned int rxr_remaining = adapter->num_rx_queues;
+ unsigned int txr_remaining = adapter->num_tx_queues;
+ unsigned int rxr_idx = 0, txr_idx = 0, v_idx = 0;
+ int err;
+
+ if (q_vectors >= (rxr_remaining + txr_remaining)) {
+ for (; rxr_remaining; v_idx++) {
+ err = txgbe_alloc_q_vector(adapter, q_vectors, v_idx,
+ 0, 0, 1, rxr_idx);
+ if (err)
+ goto err_out;
+
+ /* update counts and index */
+ rxr_remaining--;
+ rxr_idx++;
+ }
+ }
+
+ for (; v_idx < q_vectors; v_idx++) {
+ int rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - v_idx);
+ int tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - v_idx);
+
+ err = txgbe_alloc_q_vector(adapter, q_vectors, v_idx,
+ tqpv, txr_idx,
+ rqpv, rxr_idx);
+
+ if (err)
+ goto err_out;
+
+ /* update counts and index */
+ rxr_remaining -= rqpv;
+ txr_remaining -= tqpv;
+ rxr_idx++;
+ txr_idx++;
+ }
+
+ return 0;
+
+err_out:
+ adapter->num_tx_queues = 0;
+ adapter->num_rx_queues = 0;
+ adapter->num_q_vectors = 0;
+
+ while (v_idx--)
+ txgbe_free_q_vector(adapter, v_idx);
+
+ return -ENOMEM;
+}
+
+/**
+ * txgbe_free_q_vectors - Free memory allocated for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * This function frees the memory allocated to the q_vectors. In addition if
+ * NAPI is enabled it will delete any references to the NAPI struct prior
+ * to freeing the q_vector.
+ **/
+static void txgbe_free_q_vectors(struct txgbe_adapter *adapter)
+{
+ int v_idx = adapter->num_q_vectors;
+
+ adapter->num_tx_queues = 0;
+ adapter->num_rx_queues = 0;
+ adapter->num_q_vectors = 0;
+
+ while (v_idx--)
+ txgbe_free_q_vector(adapter, v_idx);
+}
+
+void txgbe_reset_interrupt_capability(struct txgbe_adapter *adapter)
+{
+ if (adapter->flags & TXGBE_FLAG_MSIX_ENABLED) {
+ adapter->flags &= ~TXGBE_FLAG_MSIX_ENABLED;
+ pci_disable_msix(adapter->pdev);
+ kfree(adapter->msix_entries);
+ adapter->msix_entries = NULL;
+ } else if (adapter->flags & TXGBE_FLAG_MSI_ENABLED) {
+ adapter->flags &= ~TXGBE_FLAG_MSI_ENABLED;
+ pci_disable_msi(adapter->pdev);
+ }
+}
+
+/**
+ * txgbe_set_interrupt_capability - set MSI-X or MSI if supported
+ * @adapter: board private structure to initialize
+ *
+ * Attempt to configure the interrupts using the best available
+ * capabilities of the hardware and the kernel.
+ **/
+void txgbe_set_interrupt_capability(struct txgbe_adapter *adapter)
+{
+ int err;
+
+ /* We will try to get MSI-X interrupts first */
+ if (!txgbe_acquire_msix_vectors(adapter))
+ return;
+ adapter->num_q_vectors = 1;
+
+ err = pci_enable_msi(adapter->pdev);
+ if (err)
+ dev_warn(&adapter->pdev->dev,
+ "Failed to allocate MSI interrupt, falling back to legacy. Error: %d\n",
+ err);
+ else
+ adapter->flags |= TXGBE_FLAG_MSI_ENABLED;
+}
+
+/**
+ * txgbe_init_interrupt_scheme - Determine proper interrupt scheme
+ * @adapter: board private structure to initialize
+ *
+ * We determine which interrupt scheme to use based on...
+ * - Kernel support (MSI, MSI-X)
+ * - which can be user-defined (via MODULE_PARAM)
+ * - Hardware queue count (num_*_queues)
+ * - defined by miscellaneous hardware support/features (RSS, etc.)
+ **/
+int txgbe_init_interrupt_scheme(struct txgbe_adapter *adapter)
+{
+ int err;
+
+ /* Number of supported queues */
+ txgbe_set_num_queues(adapter);
+
+ /* Set interrupt mode */
+ txgbe_set_interrupt_capability(adapter);
+
+ /* Allocate memory for queues */
+ err = txgbe_alloc_q_vectors(adapter);
+ if (err) {
+ netif_err(adapter, probe, adapter->netdev,
+ "Unable to allocate memory for queue vectors\n");
+ txgbe_reset_interrupt_capability(adapter);
+ return err;
+ }
+
+ txgbe_cache_ring_register(adapter);
+
+ set_bit(__TXGBE_DOWN, &adapter->state);
+
+ return 0;
+}
+
+/**
+ * txgbe_clear_interrupt_scheme - Clear the current interrupt scheme settings
+ * @adapter: board private structure to clear interrupt scheme on
+ *
+ * We go through and clear interrupt specific resources and reset the structure
+ * to pre-load conditions
+ **/
+void txgbe_clear_interrupt_scheme(struct txgbe_adapter *adapter)
+{
+ txgbe_free_q_vectors(adapter);
+ txgbe_reset_interrupt_capability(adapter);
+}
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
index 7f5225004e28..71954d2d4b9a 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
@@ -139,6 +139,355 @@ static void txgbe_get_hw_control(struct txgbe_adapter *adapter)
TXGBE_CFG_PORT_CTL_DRV_LOAD, TXGBE_CFG_PORT_CTL_DRV_LOAD);
}
+/**
+ * txgbe_set_ivar - set the IVAR registers, mapping interrupt causes to vectors
+ * @adapter: pointer to adapter struct
+ * @direction: 0 for Rx, 1 for Tx, -1 for other causes
+ * @queue: queue to map the corresponding interrupt to
+ * @msix_vector: the vector to map to the corresponding queue
+ *
+ **/
+static void txgbe_set_ivar(struct txgbe_adapter *adapter, s8 direction,
+ u16 queue, u16 msix_vector)
+{
+ u32 ivar, index;
+ struct txgbe_hw *hw = &adapter->hw;
+
+ if (direction == -1) {
+ /* other causes */
+ msix_vector |= TXGBE_PX_IVAR_ALLOC_VAL;
+ index = 0;
+ ivar = rd32(&adapter->hw, TXGBE_PX_MISC_IVAR);
+ ivar &= ~(0xFF << index);
+ ivar |= (msix_vector << index);
+ wr32(&adapter->hw, TXGBE_PX_MISC_IVAR, ivar);
+ } else {
+ /* tx or rx causes */
+ msix_vector |= TXGBE_PX_IVAR_ALLOC_VAL;
+ index = ((16 * (queue & 1)) + (8 * direction));
+ ivar = rd32(hw, TXGBE_PX_IVAR(queue >> 1));
+ ivar &= ~(0xFF << index);
+ ivar |= (msix_vector << index);
+ wr32(hw, TXGBE_PX_IVAR(queue >> 1), ivar);
+ }
+}
+
+/**
+ * txgbe_configure_msix - Configure MSI-X hardware
+ * @adapter: board private structure
+ *
+ * txgbe_configure_msix sets up the hardware to properly generate MSI-X
+ * interrupts.
+ **/
+static void txgbe_configure_msix(struct txgbe_adapter *adapter)
+{
+ u16 v_idx;
+
+ /* Populate MSIX to EITR Select */
+ wr32(&adapter->hw, TXGBE_PX_ITRSEL, 0);
+
+ /* Populate the IVAR table and set the ITR values to the
+ * corresponding register.
+ */
+ for (v_idx = 0; v_idx < adapter->num_q_vectors; v_idx++) {
+ struct txgbe_q_vector *q_vector = adapter->q_vector[v_idx];
+ struct txgbe_ring *ring;
+
+ txgbe_for_each_ring(ring, q_vector->rx)
+ txgbe_set_ivar(adapter, 0, ring->reg_idx, v_idx);
+
+ txgbe_for_each_ring(ring, q_vector->tx)
+ txgbe_set_ivar(adapter, 1, ring->reg_idx, v_idx);
+
+ txgbe_write_eitr(q_vector);
+ }
+
+ txgbe_set_ivar(adapter, -1, 0, v_idx);
+
+ wr32(&adapter->hw, TXGBE_PX_ITR(v_idx), 1950);
+}
+
+/**
+ * txgbe_write_eitr - write EITR register in hardware specific way
+ * @q_vector: structure containing interrupt and ring information
+ *
+ * This function is made to be called by ethtool and by the driver
+ * when it needs to update EITR registers at runtime. Hardware
+ * specific quirks/differences are taken care of here.
+ */
+void txgbe_write_eitr(struct txgbe_q_vector *q_vector)
+{
+ struct txgbe_adapter *adapter = q_vector->adapter;
+ struct txgbe_hw *hw = &adapter->hw;
+ int v_idx = q_vector->v_idx;
+ u32 itr_reg = q_vector->itr & TXGBE_MAX_EITR;
+
+ itr_reg |= TXGBE_PX_ITR_CNT_WDIS;
+
+ wr32(hw, TXGBE_PX_ITR(v_idx), itr_reg);
+}
+
+/**
+ * txgbe_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ * @queues: enable irqs for queues
+ * @flush: flush register write
+ **/
+void txgbe_irq_enable(struct txgbe_adapter *adapter, bool queues, bool flush)
+{
+ u32 mask = 0;
+ struct txgbe_hw *hw = &adapter->hw;
+ u8 device_type = hw->subsystem_device_id & 0xF0;
+
+ /* enable gpio interrupt */
+ if (device_type != TXGBE_ID_MAC_XAUI &&
+ device_type != TXGBE_ID_MAC_SGMII) {
+ mask |= TXGBE_GPIO_INTEN_2;
+ mask |= TXGBE_GPIO_INTEN_3;
+ mask |= TXGBE_GPIO_INTEN_6;
+ }
+ wr32(&adapter->hw, TXGBE_GPIO_INTEN, mask);
+
+ if (device_type != TXGBE_ID_MAC_XAUI &&
+ device_type != TXGBE_ID_MAC_SGMII) {
+ mask = TXGBE_GPIO_INTTYPE_LEVEL_2 | TXGBE_GPIO_INTTYPE_LEVEL_3 |
+ TXGBE_GPIO_INTTYPE_LEVEL_6;
+ }
+ wr32(&adapter->hw, TXGBE_GPIO_INTTYPE_LEVEL, mask);
+
+ /* enable misc interrupt */
+ mask = TXGBE_PX_MISC_IEN_MASK;
+
+ wr32(&adapter->hw, TXGBE_PX_MISC_IEN, mask);
+
+ /* unmask interrupt */
+ txgbe_intr_enable(&adapter->hw, TXGBE_INTR_MISC(adapter));
+ if (queues)
+ txgbe_intr_enable(&adapter->hw, TXGBE_INTR_QALL(adapter));
+
+ /* flush configuration */
+ if (flush)
+ TXGBE_WRITE_FLUSH(&adapter->hw);
+}
+
+static irqreturn_t txgbe_msix_other(int __always_unused irq, void *data)
+{
+ struct txgbe_adapter *adapter = data;
+
+ txgbe_misc_isb(adapter, TXGBE_ISB_MISC);
+
+ /* re-enable the original interrupt state, no lsc, no queues */
+ if (!test_bit(__TXGBE_DOWN, &adapter->state))
+ txgbe_irq_enable(adapter, false, false);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t txgbe_msix_clean_rings(int __always_unused irq, void *data)
+{
+ return IRQ_HANDLED;
+}
+
+/**
+ * txgbe_request_msix_irqs - Initialize MSI-X interrupts
+ * @adapter: board private structure
+ *
+ * txgbe_request_msix_irqs allocates MSI-X vectors and requests
+ * interrupts from the kernel.
+ **/
+static int txgbe_request_msix_irqs(struct txgbe_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int vector, err;
+ int ri = 0, ti = 0;
+
+ for (vector = 0; vector < adapter->num_q_vectors; vector++) {
+ struct txgbe_q_vector *q_vector = adapter->q_vector[vector];
+ struct msix_entry *entry = &adapter->msix_entries[vector];
+
+ if (q_vector->tx.ring && q_vector->rx.ring) {
+ snprintf(q_vector->name, sizeof(q_vector->name) - 1,
+ "%s-TxRx-%d", netdev->name, ri++);
+ ti++;
+ } else if (q_vector->rx.ring) {
+ snprintf(q_vector->name, sizeof(q_vector->name) - 1,
+ "%s-rx-%d", netdev->name, ri++);
+ } else if (q_vector->tx.ring) {
+ snprintf(q_vector->name, sizeof(q_vector->name) - 1,
+ "%s-tx-%d", netdev->name, ti++);
+ } else {
+ /* skip this unused q_vector */
+ continue;
+ }
+ err = request_irq(entry->vector, &txgbe_msix_clean_rings, 0,
+ q_vector->name, q_vector);
+ if (err) {
+ netif_err(adapter, probe, netdev,
+ "request_irq failed for MSIX interrupt '%s' Error: %d\n",
+ q_vector->name, err);
+ goto free_queue_irqs;
+ }
+ }
+
+ err = request_irq(adapter->msix_entries[vector].vector,
+ txgbe_msix_other, 0, netdev->name, adapter);
+ if (err) {
+ netif_err(adapter, probe, netdev,
+ "request_irq for msix_other failed: %d\n", err);
+ goto free_queue_irqs;
+ }
+
+ return 0;
+
+free_queue_irqs:
+ while (vector) {
+ vector--;
+ irq_set_affinity_hint(adapter->msix_entries[vector].vector,
+ NULL);
+ free_irq(adapter->msix_entries[vector].vector,
+ adapter->q_vector[vector]);
+ }
+ adapter->flags &= ~TXGBE_FLAG_MSIX_ENABLED;
+ pci_disable_msix(adapter->pdev);
+ kfree(adapter->msix_entries);
+ adapter->msix_entries = NULL;
+ return err;
+}
+
+/**
+ * txgbe_intr - legacy mode Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t txgbe_intr(int __always_unused irq, void *data)
+{
+ struct txgbe_adapter *adapter = data;
+ u32 eicr;
+
+ eicr = txgbe_misc_isb(adapter, TXGBE_ISB_VEC0);
+ if (!eicr) {
+ /* shared interrupt alert!
+ * the interrupt that we masked before the EICR read.
+ */
+ if (!test_bit(__TXGBE_DOWN, &adapter->state))
+ txgbe_irq_enable(adapter, true, true);
+ return IRQ_NONE; /* Not our interrupt */
+ }
+ adapter->isb_mem[TXGBE_ISB_VEC0] = 0;
+ if (!(adapter->flags & TXGBE_FLAG_MSI_ENABLED))
+ wr32(&adapter->hw, TXGBE_PX_INTA, 1);
+
+ txgbe_misc_isb(adapter, TXGBE_ISB_MISC);
+
+ adapter->isb_mem[TXGBE_ISB_MISC] = 0;
+
+ /* re-enable link(maybe) and non-queue interrupts, no flush.
+ * txgbe_poll will re-enable the queue interrupts
+ */
+ if (!test_bit(__TXGBE_DOWN, &adapter->state))
+ txgbe_irq_enable(adapter, false, false);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * txgbe_request_irq - initialize interrupts
+ * @adapter: board private structure
+ *
+ * Attempts to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static int txgbe_request_irq(struct txgbe_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int err;
+
+ if (adapter->flags & TXGBE_FLAG_MSIX_ENABLED)
+ err = txgbe_request_msix_irqs(adapter);
+ else if (adapter->flags & TXGBE_FLAG_MSI_ENABLED)
+ err = request_irq(adapter->pdev->irq, &txgbe_intr, 0,
+ netdev->name, adapter);
+ else
+ err = request_irq(adapter->pdev->irq, &txgbe_intr, IRQF_SHARED,
+ netdev->name, adapter);
+
+ if (err)
+ netif_err(adapter, probe, adapter->netdev,
+ "request_irq failed, Error %d\n", err);
+
+ return err;
+}
+
+static void txgbe_free_irq(struct txgbe_adapter *adapter)
+{
+ int vector;
+
+ if (!(adapter->flags & TXGBE_FLAG_MSIX_ENABLED)) {
+ free_irq(adapter->pdev->irq, adapter);
+ return;
+ }
+
+ for (vector = 0; vector < adapter->num_q_vectors; vector++) {
+ struct txgbe_q_vector *q_vector = adapter->q_vector[vector];
+ struct msix_entry *entry = &adapter->msix_entries[vector];
+
+ /* free only the irqs that were actually requested */
+ if (!q_vector->rx.ring && !q_vector->tx.ring)
+ continue;
+
+ /* clear the affinity_mask in the IRQ descriptor */
+ irq_set_affinity_hint(entry->vector, NULL);
+ free_irq(entry->vector, q_vector);
+ }
+
+ free_irq(adapter->msix_entries[vector++].vector, adapter);
+}
+
+/**
+ * txgbe_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+void txgbe_irq_disable(struct txgbe_adapter *adapter)
+{
+ wr32(&adapter->hw, TXGBE_PX_MISC_IEN, 0);
+ txgbe_intr_disable(&adapter->hw, TXGBE_INTR_ALL);
+
+ TXGBE_WRITE_FLUSH(&adapter->hw);
+ if (adapter->flags & TXGBE_FLAG_MSIX_ENABLED) {
+ int vector;
+
+ for (vector = 0; vector < adapter->num_q_vectors; vector++)
+ synchronize_irq(adapter->msix_entries[vector].vector);
+
+ synchronize_irq(adapter->msix_entries[vector++].vector);
+ } else {
+ synchronize_irq(adapter->pdev->irq);
+ }
+}
+
+/**
+ * txgbe_configure_msi_and_legacy - Initialize PIN (INTA...) and MSI interrupts
+ * @adapter: board private structure
+ **/
+static void txgbe_configure_msi_and_legacy(struct txgbe_adapter *adapter)
+{
+ struct txgbe_q_vector *q_vector = adapter->q_vector[0];
+ struct txgbe_ring *ring;
+
+ txgbe_write_eitr(q_vector);
+
+ txgbe_for_each_ring(ring, q_vector->rx)
+ txgbe_set_ivar(adapter, 0, ring->reg_idx, 0);
+
+ txgbe_for_each_ring(ring, q_vector->tx)
+ txgbe_set_ivar(adapter, 1, ring->reg_idx, 0);
+
+ txgbe_set_ivar(adapter, -1, 0, 1);
+
+ netif_info(adapter, hw, adapter->netdev,
+ "Legacy interrupt IVAR setup done\n");
+}
+
static void txgbe_sync_mac_table(struct txgbe_adapter *adapter)
{
struct txgbe_hw *hw = &adapter->hw;
@@ -190,6 +539,21 @@ static void txgbe_flush_sw_mac_table(struct txgbe_adapter *adapter)
txgbe_sync_mac_table(adapter);
}
+static void txgbe_configure_isb(struct txgbe_adapter *adapter)
+{
+ /* set ISB Address */
+ struct txgbe_hw *hw = &adapter->hw;
+
+ wr32(hw, TXGBE_PX_ISB_ADDR_L,
+ adapter->isb_dma & DMA_BIT_MASK(32));
+ wr32(hw, TXGBE_PX_ISB_ADDR_H, adapter->isb_dma >> 32);
+}
+
+static void txgbe_configure(struct txgbe_adapter *adapter)
+{
+ txgbe_configure_isb(adapter);
+}
+
static bool txgbe_is_sfp(struct txgbe_hw *hw)
{
switch (hw->phy.media_type) {
@@ -226,12 +590,29 @@ static void txgbe_sfp_link_config(struct txgbe_adapter *adapter)
adapter->sfp_poll_time = 0;
}
+static void txgbe_setup_gpie(struct txgbe_adapter *adapter)
+{
+ struct txgbe_hw *hw = &adapter->hw;
+ u32 gpie = 0;
+
+ if (adapter->flags & TXGBE_FLAG_MSIX_ENABLED)
+ gpie = TXGBE_PX_GPIE_MODEL;
+
+ wr32(hw, TXGBE_PX_GPIE, gpie);
+}
+
static void txgbe_up_complete(struct txgbe_adapter *adapter)
{
struct txgbe_hw *hw = &adapter->hw;
u32 links_reg;
txgbe_get_hw_control(adapter);
+ txgbe_setup_gpie(adapter);
+
+ if (adapter->flags & TXGBE_FLAG_MSIX_ENABLED)
+ txgbe_configure_msix(adapter);
+ else
+ txgbe_configure_msi_and_legacy(adapter);
/* enable the optics for SFP+ fiber */
TCALL(hw, mac.ops.enable_tx_laser);
@@ -262,6 +643,14 @@ static void txgbe_up_complete(struct txgbe_adapter *adapter)
}
}
+ /* clear any pending interrupts, may auto mask */
+ rd32(hw, TXGBE_PX_IC(0));
+ rd32(hw, TXGBE_PX_IC(1));
+ rd32(hw, TXGBE_PX_MISC_IC);
+ if ((hw->subsystem_device_id & 0xF0) == TXGBE_ID_XAUI)
+ wr32(hw, TXGBE_GPIO_EOI, TXGBE_GPIO_EOI_6);
+ txgbe_irq_enable(adapter, true, true);
+
/* Set PF Reset Done bit so PF/VF Mail Ops can work */
wr32m(hw, TXGBE_CFG_PORT_CTL,
TXGBE_CFG_PORT_CTL_PFRSTD, TXGBE_CFG_PORT_CTL_PFRSTD);
@@ -324,6 +713,8 @@ void txgbe_disable_device(struct txgbe_adapter *adapter)
netif_carrier_off(netdev);
netif_tx_disable(netdev);
+ txgbe_irq_disable(adapter);
+
adapter->flags &= ~TXGBE_FLAG_NEED_LINK_UPDATE;
del_timer_sync(&adapter->service_timer);
@@ -426,11 +817,52 @@ static int txgbe_sw_init(struct txgbe_adapter *adapter)
return err;
}
+ /* enable itr by default in dynamic mode */
+ adapter->rx_itr_setting = 1;
+ adapter->tx_itr_setting = 1;
+
+ adapter->max_q_vectors = TXGBE_MAX_MSIX_Q_VECTORS_SAPPHIRE;
+
set_bit(__TXGBE_DOWN, &adapter->state);
return 0;
}
+/**
+ * txgbe_setup_isb_resources - allocate interrupt status resources
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int txgbe_setup_isb_resources(struct txgbe_adapter *adapter)
+{
+ struct device *dev = &adapter->pdev->dev;
+
+ adapter->isb_mem = dma_alloc_coherent(dev,
+ sizeof(u32) * TXGBE_ISB_MAX,
+ &adapter->isb_dma,
+ GFP_KERNEL);
+ if (!adapter->isb_mem)
+ return -ENOMEM;
+ memset(adapter->isb_mem, 0, sizeof(u32) * TXGBE_ISB_MAX);
+ return 0;
+}
+
+/**
+ * txgbe_free_isb_resources - allocate all queues Rx resources
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+static void txgbe_free_isb_resources(struct txgbe_adapter *adapter)
+{
+ struct device *dev = &adapter->pdev->dev;
+
+ dma_free_coherent(dev, sizeof(u32) * TXGBE_ISB_MAX,
+ adapter->isb_mem, adapter->isb_dma);
+ adapter->isb_mem = NULL;
+}
+
/**
* txgbe_open - Called when a network interface is made active
* @netdev: network interface device structure
@@ -438,17 +870,49 @@ static int txgbe_sw_init(struct txgbe_adapter *adapter)
* Returns 0 on success, negative value on failure
*
* The open entry point is called when a network interface is made
- * active by the system (IFF_UP).
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
**/
int txgbe_open(struct net_device *netdev)
{
struct txgbe_adapter *adapter = netdev_priv(netdev);
+ int err;
netif_carrier_off(netdev);
+ err = txgbe_setup_isb_resources(adapter);
+ if (err)
+ goto err_reset;
+
+ txgbe_configure(adapter);
+
+ err = txgbe_request_irq(adapter);
+ if (err)
+ goto err_free_isb;
+
+ /* Notify the stack of the actual queue counts. */
+ err = netif_set_real_num_tx_queues(netdev, adapter->num_tx_queues);
+ if (err)
+ goto err_free_irq;
+
+ err = netif_set_real_num_rx_queues(netdev, adapter->num_rx_queues);
+ if (err)
+ goto err_free_irq;
+
txgbe_up_complete(adapter);
return 0;
+
+err_free_irq:
+ txgbe_free_irq(adapter);
+err_free_isb:
+ txgbe_free_isb_resources(adapter);
+err_reset:
+ txgbe_reset(adapter);
+
+ return err;
}
/**
@@ -465,6 +929,9 @@ static void txgbe_close_suspend(struct txgbe_adapter *adapter)
txgbe_disable_device(adapter);
if (!((hw->subsystem_device_id & TXGBE_NCSI_MASK) == TXGBE_NCSI_SUP))
TCALL(hw, mac.ops.disable_tx_laser);
+ txgbe_free_irq(adapter);
+
+ txgbe_free_isb_resources(adapter);
}
/**
@@ -483,6 +950,9 @@ int txgbe_close(struct net_device *netdev)
struct txgbe_adapter *adapter = netdev_priv(netdev);
txgbe_down(adapter);
+ txgbe_free_irq(adapter);
+
+ txgbe_free_isb_resources(adapter);
txgbe_release_hw_control(adapter);
@@ -501,6 +971,8 @@ static void txgbe_dev_shutdown(struct pci_dev *pdev, bool *enable_wake)
txgbe_close_suspend(adapter);
rtnl_unlock();
+ txgbe_clear_interrupt_scheme(adapter);
+
txgbe_release_hw_control(adapter);
if (!test_and_set_bit(__TXGBE_DISABLED, &adapter->state))
@@ -1000,6 +1472,10 @@ static int txgbe_probe(struct pci_dev *pdev,
set_bit(__TXGBE_SERVICE_INITED, &adapter->state);
clear_bit(__TXGBE_SERVICE_SCHED, &adapter->state);
+ err = txgbe_init_interrupt_scheme(adapter);
+ if (err)
+ goto err_free_mac_table;
+
/* Save off EEPROM version number and Option Rom version which
* together make a unique identify for the eeprom
*/
@@ -1116,6 +1592,7 @@ static int txgbe_probe(struct pci_dev *pdev,
return 0;
err_release_hw:
+ txgbe_clear_interrupt_scheme(adapter);
txgbe_release_hw_control(adapter);
err_free_mac_table:
kfree(adapter->mac_table);
@@ -1157,6 +1634,7 @@ static void txgbe_remove(struct pci_dev *pdev)
adapter->netdev_registered = false;
}
+ txgbe_clear_interrupt_scheme(adapter);
txgbe_release_hw_control(adapter);
pci_release_selected_regions(pdev,
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h
index a8f9a8af980e..690b644962f2 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h
@@ -410,6 +410,12 @@ struct txgbe_thermal_sensor_data {
/* GPIO Registers */
#define TXGBE_GPIO_DR 0x14800
#define TXGBE_GPIO_DDR 0x14804
+#define TXGBE_GPIO_CTL 0x14808
+#define TXGBE_GPIO_INTEN 0x14830
+#define TXGBE_GPIO_INTMASK 0x14834
+#define TXGBE_GPIO_INTTYPE_LEVEL 0x14838
+#define TXGBE_GPIO_INTSTATUS 0x14844
+#define TXGBE_GPIO_EOI 0x1484C
/*GPIO bit */
#define TXGBE_GPIO_DR_0 0x00000001U /* SDP0 Data Value */
#define TXGBE_GPIO_DR_1 0x00000002U /* SDP1 Data Value */
@@ -427,6 +433,25 @@ struct txgbe_thermal_sensor_data {
#define TXGBE_GPIO_DDR_5 0x00000020U /* SDP5 IO direction */
#define TXGBE_GPIO_DDR_6 0x00000040U /* SDP6 IO direction */
#define TXGBE_GPIO_DDR_7 0x00000080U /* SDP7 IO direction */
+#define TXGBE_GPIO_CTL_SW_MODE 0x00000000U /* SDP software mode */
+#define TXGBE_GPIO_INTEN_1 0x00000002U /* SDP1 interrupt enable */
+#define TXGBE_GPIO_INTEN_2 0x00000004U /* SDP2 interrupt enable */
+#define TXGBE_GPIO_INTEN_3 0x00000008U /* SDP3 interrupt enable */
+#define TXGBE_GPIO_INTEN_5 0x00000020U /* SDP5 interrupt enable */
+#define TXGBE_GPIO_INTEN_6 0x00000040U /* SDP6 interrupt enable */
+#define TXGBE_GPIO_INTTYPE_LEVEL_2 0x00000004U /* SDP2 interrupt type level */
+#define TXGBE_GPIO_INTTYPE_LEVEL_3 0x00000008U /* SDP3 interrupt type level */
+#define TXGBE_GPIO_INTTYPE_LEVEL_5 0x00000020U /* SDP5 interrupt type level */
+#define TXGBE_GPIO_INTTYPE_LEVEL_6 0x00000040U /* SDP6 interrupt type level */
+#define TXGBE_GPIO_INTSTATUS_1 0x00000002U /* SDP1 interrupt status */
+#define TXGBE_GPIO_INTSTATUS_2 0x00000004U /* SDP2 interrupt status */
+#define TXGBE_GPIO_INTSTATUS_3 0x00000008U /* SDP3 interrupt status */
+#define TXGBE_GPIO_INTSTATUS_5 0x00000020U /* SDP5 interrupt status */
+#define TXGBE_GPIO_INTSTATUS_6 0x00000040U /* SDP6 interrupt status */
+#define TXGBE_GPIO_EOI_2 0x00000004U /* SDP2 interrupt clear */
+#define TXGBE_GPIO_EOI_3 0x00000008U /* SDP3 interrupt clear */
+#define TXGBE_GPIO_EOI_5 0x00000020U /* SDP5 interrupt clear */
+#define TXGBE_GPIO_EOI_6 0x00000040U /* SDP6 interrupt clear */
/*********************** Transmit DMA registers **************************/
/* transmit global control */
@@ -615,6 +640,107 @@ struct txgbe_thermal_sensor_data {
#define TXGBE_PX_TRANSACTION_PENDING 0x168
#define TXGBE_PX_INTA 0x110
+/* Interrupt register bitmasks */
+/* Extended Interrupt Cause Read */
+#define TXGBE_PX_MISC_IC_ETH_LKDN 0x00000100U /* eth link down */
+#define TXGBE_PX_MISC_IC_DEV_RST 0x00000400U /* device reset event */
+#define TXGBE_PX_MISC_IC_TIMESYNC 0x00000800U /* time sync */
+#define TXGBE_PX_MISC_IC_STALL 0x00001000U /* trans or recv path is stalled */
+#define TXGBE_PX_MISC_IC_LINKSEC 0x00002000U /* Tx LinkSec require key exchange */
+#define TXGBE_PX_MISC_IC_RX_MISS 0x00004000U /* Packet Buffer Overrun */
+#define TXGBE_PX_MISC_IC_FLOW_DIR 0x00008000U /* FDir Exception */
+#define TXGBE_PX_MISC_IC_I2C 0x00010000U /* I2C interrupt */
+#define TXGBE_PX_MISC_IC_ETH_EVENT 0x00020000U /* err reported by MAC except eth link down */
+#define TXGBE_PX_MISC_IC_ETH_LK 0x00040000U /* link up */
+#define TXGBE_PX_MISC_IC_ETH_AN 0x00080000U /* link auto-nego done */
+#define TXGBE_PX_MISC_IC_INT_ERR 0x00100000U /* integrity error */
+#define TXGBE_PX_MISC_IC_SPI 0x00200000U /* SPI interface */
+#define TXGBE_PX_MISC_IC_VF_MBOX 0x00800000U /* VF-PF message box */
+#define TXGBE_PX_MISC_IC_GPIO 0x04000000U /* GPIO interrupt */
+#define TXGBE_PX_MISC_IC_PCIE_REQ_ERR 0x08000000U /* pcie request error int */
+#define TXGBE_PX_MISC_IC_OVER_HEAT 0x10000000U /* overheat detection */
+#define TXGBE_PX_MISC_IC_PROBE_MATCH 0x20000000U /* probe match */
+#define TXGBE_PX_MISC_IC_MNG_HOST_MBOX 0x40000000U /* mng mailbox */
+#define TXGBE_PX_MISC_IC_TIMER 0x80000000U /* tcp timer */
+
+/* Extended Interrupt Cause Set */
+#define TXGBE_PX_MISC_ICS_ETH_LKDN 0x00000100U
+#define TXGBE_PX_MISC_ICS_DEV_RST 0x00000400U
+#define TXGBE_PX_MISC_ICS_TIMESYNC 0x00000800U
+#define TXGBE_PX_MISC_ICS_STALL 0x00001000U
+#define TXGBE_PX_MISC_ICS_LINKSEC 0x00002000U
+#define TXGBE_PX_MISC_ICS_RX_MISS 0x00004000U
+#define TXGBE_PX_MISC_ICS_FLOW_DIR 0x00008000U
+#define TXGBE_PX_MISC_ICS_I2C 0x00010000U
+#define TXGBE_PX_MISC_ICS_ETH_EVENT 0x00020000U
+#define TXGBE_PX_MISC_ICS_ETH_LK 0x00040000U
+#define TXGBE_PX_MISC_ICS_ETH_AN 0x00080000U
+#define TXGBE_PX_MISC_ICS_INT_ERR 0x00100000U
+#define TXGBE_PX_MISC_ICS_SPI 0x00200000U
+#define TXGBE_PX_MISC_ICS_VF_MBOX 0x00800000U
+#define TXGBE_PX_MISC_ICS_GPIO 0x04000000U
+#define TXGBE_PX_MISC_ICS_PCIE_REQ_ERR 0x08000000U
+#define TXGBE_PX_MISC_ICS_OVER_HEAT 0x10000000U
+#define TXGBE_PX_MISC_ICS_PROBE_MATCH 0x20000000U
+#define TXGBE_PX_MISC_ICS_MNG_HOST_MBOX 0x40000000U
+#define TXGBE_PX_MISC_ICS_TIMER 0x80000000U
+
+/* Extended Interrupt Enable Set */
+#define TXGBE_PX_MISC_IEN_ETH_LKDN 0x00000100U
+#define TXGBE_PX_MISC_IEN_DEV_RST 0x00000400U
+#define TXGBE_PX_MISC_IEN_TIMESYNC 0x00000800U
+#define TXGBE_PX_MISC_IEN_STALL 0x00001000U
+#define TXGBE_PX_MISC_IEN_LINKSEC 0x00002000U
+#define TXGBE_PX_MISC_IEN_RX_MISS 0x00004000U
+#define TXGBE_PX_MISC_IEN_FLOW_DIR 0x00008000U
+#define TXGBE_PX_MISC_IEN_I2C 0x00010000U
+#define TXGBE_PX_MISC_IEN_ETH_EVENT 0x00020000U
+#define TXGBE_PX_MISC_IEN_ETH_LK 0x00040000U
+#define TXGBE_PX_MISC_IEN_ETH_AN 0x00080000U
+#define TXGBE_PX_MISC_IEN_INT_ERR 0x00100000U
+#define TXGBE_PX_MISC_IEN_SPI 0x00200000U
+#define TXGBE_PX_MISC_IEN_VF_MBOX 0x00800000U
+#define TXGBE_PX_MISC_IEN_GPIO 0x04000000U
+#define TXGBE_PX_MISC_IEN_PCIE_REQ_ERR 0x08000000U
+#define TXGBE_PX_MISC_IEN_OVER_HEAT 0x10000000U
+#define TXGBE_PX_MISC_IEN_PROBE_MATCH 0x20000000U
+#define TXGBE_PX_MISC_IEN_MNG_HOST_MBOX 0x40000000U
+#define TXGBE_PX_MISC_IEN_TIMER 0x80000000U
+
+#define TXGBE_PX_MISC_IEN_MASK ( \
+ TXGBE_PX_MISC_IEN_ETH_LKDN | \
+ TXGBE_PX_MISC_IEN_DEV_RST | \
+ TXGBE_PX_MISC_IEN_ETH_EVENT | \
+ TXGBE_PX_MISC_IEN_ETH_LK | \
+ TXGBE_PX_MISC_IEN_ETH_AN | \
+ TXGBE_PX_MISC_IEN_INT_ERR | \
+ TXGBE_PX_MISC_IEN_VF_MBOX | \
+ TXGBE_PX_MISC_IEN_GPIO | \
+ TXGBE_PX_MISC_IEN_MNG_HOST_MBOX | \
+ TXGBE_PX_MISC_IEN_STALL | \
+ TXGBE_PX_MISC_IEN_PCIE_REQ_ERR | \
+ TXGBE_PX_MISC_IEN_TIMER)
+
+/* General purpose Interrupt Enable */
+#define TXGBE_PX_GPIE_MODEL 0x00000001U
+#define TXGBE_PX_GPIE_IMEN 0x00000002U
+#define TXGBE_PX_GPIE_LL_INTERVAL 0x000000F0U
+#define TXGBE_PX_GPIE_RSC_DELAY 0x00000700U
+
+/* Interrupt Vector Allocation Registers */
+#define TXGBE_PX_IVAR_REG_NUM 64
+#define TXGBE_PX_IVAR_ALLOC_VAL 0x80 /* Interrupt Allocation valid */
+
+#define TXGBE_MAX_INT_RATE 500000
+#define TXGBE_MIN_INT_RATE 980
+#define TXGBE_MAX_EITR 0x00000FF8U
+#define TXGBE_MIN_EITR 8
+#define TXGBE_PX_ITR_ITR_INT_MASK 0x00000FF8U
+#define TXGBE_PX_ITR_LLI_CREDIT 0x001f0000U
+#define TXGBE_PX_ITR_LLI_MOD 0x00008000U
+#define TXGBE_PX_ITR_CNT_WDIS 0x80000000U
+#define TXGBE_PX_ITR_ITR_CNT 0x0FE00000U
+
/* transmit DMA Registers */
#define TXGBE_PX_TR_BAL(_i) (0x03000 + ((_i) * 0x40))
#define TXGBE_PX_TR_BAH(_i) (0x03004 + ((_i) * 0x40))
@@ -680,6 +806,10 @@ struct txgbe_thermal_sensor_data {
#define TXGBE_ISCSI_BOOT_CONFIG 0x07
#define TXGBE_SERIAL_NUMBER_MAC_ADDR 0x11
+#define TXGBE_MAX_MSIX_VECTORS_SAPPHIRE 0x40
+
+/* MSI-X capability fields masks */
+#define TXGBE_PCIE_MSIX_TBL_SZ_MASK 0x7FF
#define TXGBE_ETH_LENGTH_OF_ADDRESS 6
@@ -1058,6 +1188,7 @@ struct txgbe_mac_info {
u32 orig_sr_an_mmd_adv_reg2;
u32 orig_vr_xs_or_pcs_mmd_digi_ctl1;
u8 san_mac_rar_index;
+ u16 max_msix_vectors;
bool orig_link_settings_stored;
bool autotry_restart;
struct txgbe_thermal_sensor_data thermal_sensor_data;
--
2.27.0
Powered by blists - more mailing lists