[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220817193017.44063-3-gerhard@engleder-embedded.com>
Date: Wed, 17 Aug 2022 21:30:14 +0200
From: Gerhard Engleder <gerhard@...leder-embedded.com>
To: davem@...emloft.net, kuba@...nel.org
Cc: netdev@...r.kernel.org,
Gerhard Engleder <gerhard@...leder-embedded.com>
Subject: [PATCH net-next 2/5] tsnep: Add loopback support
Add support for NETIF_F_LOOPBACK feature. Loopback mode is used for
testing.
Signed-off-by: Gerhard Engleder <gerhard@...leder-embedded.com>
---
drivers/net/ethernet/engleder/tsnep_main.c | 71 ++++++++++++++++------
1 file changed, 54 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/engleder/tsnep_main.c b/drivers/net/ethernet/engleder/tsnep_main.c
index a5f7152a1716..7fe6a897ce00 100644
--- a/drivers/net/ethernet/engleder/tsnep_main.c
+++ b/drivers/net/ethernet/engleder/tsnep_main.c
@@ -124,30 +124,51 @@ static int tsnep_mdiobus_write(struct mii_bus *bus, int addr, int regnum,
return 0;
}
+static void tsnep_set_link_mode(struct tsnep_adapter *adapter)
+{
+ u32 mode;
+
+ switch (adapter->phydev->speed) {
+ case SPEED_100:
+ mode = ECM_LINK_MODE_100;
+ break;
+ case SPEED_1000:
+ mode = ECM_LINK_MODE_1000;
+ break;
+ default:
+ mode = ECM_LINK_MODE_OFF;
+ break;
+ }
+ iowrite32(mode, adapter->addr + ECM_STATUS);
+}
+
static void tsnep_phy_link_status_change(struct net_device *netdev)
{
struct tsnep_adapter *adapter = netdev_priv(netdev);
struct phy_device *phydev = netdev->phydev;
- u32 mode;
- if (phydev->link) {
- switch (phydev->speed) {
- case SPEED_100:
- mode = ECM_LINK_MODE_100;
- break;
- case SPEED_1000:
- mode = ECM_LINK_MODE_1000;
- break;
- default:
- mode = ECM_LINK_MODE_OFF;
- break;
- }
- iowrite32(mode, adapter->addr + ECM_STATUS);
- }
+ if (phydev->link)
+ tsnep_set_link_mode(adapter);
phy_print_status(netdev->phydev);
}
+static int tsnep_phy_loopback(struct tsnep_adapter *adapter, bool enable)
+{
+ int retval;
+
+ retval = phy_loopback(adapter->phydev, enable);
+
+ /* PHY link state change is not signaled if loopback is enabled, it
+ * would delay a working loopback anyway, let's ensure that loopback
+ * is working immediately by setting link mode directly
+ */
+ if (!retval && enable)
+ tsnep_set_link_mode(adapter);
+
+ return retval;
+}
+
static int tsnep_phy_open(struct tsnep_adapter *adapter)
{
struct phy_device *phydev;
@@ -1017,6 +1038,22 @@ static int tsnep_netdev_set_mac_address(struct net_device *netdev, void *addr)
return 0;
}
+static int tsnep_netdev_set_features(struct net_device *netdev,
+ netdev_features_t features)
+{
+ struct tsnep_adapter *adapter = netdev_priv(netdev);
+ netdev_features_t changed = netdev->features ^ features;
+ bool enable;
+ int retval = 0;
+
+ if (changed & NETIF_F_LOOPBACK) {
+ enable = !!(features & NETIF_F_LOOPBACK);
+ retval = tsnep_phy_loopback(adapter, enable);
+ }
+
+ return retval;
+}
+
static ktime_t tsnep_netdev_get_tstamp(struct net_device *netdev,
const struct skb_shared_hwtstamps *hwtstamps,
bool cycles)
@@ -1038,9 +1075,9 @@ static const struct net_device_ops tsnep_netdev_ops = {
.ndo_start_xmit = tsnep_netdev_xmit_frame,
.ndo_eth_ioctl = tsnep_netdev_ioctl,
.ndo_set_rx_mode = tsnep_netdev_set_multicast,
-
.ndo_get_stats64 = tsnep_netdev_get_stats64,
.ndo_set_mac_address = tsnep_netdev_set_mac_address,
+ .ndo_set_features = tsnep_netdev_set_features,
.ndo_get_tstamp = tsnep_netdev_get_tstamp,
.ndo_setup_tc = tsnep_tc_setup,
};
@@ -1225,7 +1262,7 @@ static int tsnep_probe(struct platform_device *pdev)
netdev->netdev_ops = &tsnep_netdev_ops;
netdev->ethtool_ops = &tsnep_ethtool_ops;
netdev->features = NETIF_F_SG;
- netdev->hw_features = netdev->features;
+ netdev->hw_features = netdev->features | NETIF_F_LOOPBACK;
/* carrier off reporting is important to ethtool even BEFORE open */
netif_carrier_off(netdev);
--
2.30.2
Powered by blists - more mailing lists