Message-ID: <2747ac1f-390e-99f9-b24e-f179af79a9da@redhat.com>
Date:   Thu, 18 Aug 2022 12:34:19 +0800
From:   Jason Wang <jasowang@...hat.com>
To:     "Michael S. Tsirkin" <mst@...hat.com>,
        Bobby Eshleman <bobbyeshleman@...il.com>
Cc:     Jakub Kicinski <kuba@...nel.org>,
        Bobby Eshleman <bobby.eshleman@...il.com>,
        Bobby Eshleman <bobby.eshleman@...edance.com>,
        Cong Wang <cong.wang@...edance.com>,
        Jiang Wang <jiang.wang@...edance.com>,
        Stefan Hajnoczi <stefanha@...hat.com>,
        Stefano Garzarella <sgarzare@...hat.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Paolo Abeni <pabeni@...hat.com>, kvm@...r.kernel.org,
        virtualization@...ts.linux-foundation.org, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Toke Høiland-Jørgensen <toke@...e.dk>
Subject: Re: [PATCH 3/6] vsock: add netdev to vhost/virtio vsock


在 2022/8/18 01:20, Michael S. Tsirkin 写道:
> On Tue, Aug 16, 2022 at 10:50:55AM +0000, Bobby Eshleman wrote:
>>>>> Eh, I was hoping it was a side channel of an existing virtio_net
>>>>> which is not the case. Given the zero-config requirement IDK if
>>>>> we'll be able to fit this into netdev semantics :(
>>>> It's certainly possible that it may not fit :/ I feel that it partially
>>>> depends on what we mean by zero-config. Is it "no config required to
>>>> have a working socket" or is it "no config required, but also no
>>>> tuning/policy/etc... supported"?
>>> The value of tuning vs confusion of a strange netdev floating around
>>> in the system is hard to estimate upfront.
>> I think "a strange netdev floating around" is a total
>> mischaracterization... vsock is a networking device and it supports
>> vsock networks. Sure, it is a virtual device and the routing is done in
>> host software, but the same is true for virtio-net and VM-to-VM vlan.
>>
>> This patch actually uses netdev for its intended purpose: to support and
>> manage the transmission of packets via a network device to a network.
>>
>> Furthermore, it actually prepares vsock to eliminate a "strange" use of
>> a netdev. The netdev in vsockmon isn't even used to transmit
>> packets, it's "floating around" for no other reason than it is needed to
>> support packet capture, which vsock couldn't support because it didn't
>> have a netdev.
>>
>> Something smells when we are required to build workaround kernel modules
>> that use netdev for ciphoning packets off to userspace, when we could
>> instead be using netdev for its intended purpose and get the same and
>> more benefit.
> So what happens when userspace inevitably attempts to bind a raw
> packet socket to this device? Assign it an IP? Set up some firewall
> rules?
>
> These things all need to be addressed before merging since they affect UAPI.


It's possible if

1) extend virtio-net to have vsock queues

2) present vsock device on top of virtio-net via e.g auxiliary bus

Then raw socket still work at ethernet level while vsock works too.

The value is to share codes between the two type of devices (queues).

Thanks


>
>>> The nice thing about using a built-in fq with no user visible knobs is
>>> that there's no extra uAPI. We can always rip it out and replace later.
>>> And it shouldn't be controversial, making the path to upstream smoother.
>> The issue is that after pulling in fq for one kind of flow management,
>> then as users observe other flow issues, we will need to re-implement
>> pfifo, and then TBF, and then we need to build an interface to let users
>> select one, and to choose queue sizes... and then after awhile we've
>> needlessly re-implemented huge chunks of the tc system.
>>
>> I don't see any good reason to restrict vsock users to using suboptimal
>> and rigid queuing.
>>
>> Thanks.

Powered by blists - more mailing lists