| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220820080758.9829-4-arinc.unal@arinc9.com>
Date: Sat, 20 Aug 2022 11:07:55 +0300
From: Arınç ÜNAL <arinc.unal@...nc9.com>
To: Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Sean Wang <sean.wang@...iatek.com>,
Landen Chao <Landen.Chao@...iatek.com>,
DENG Qingfang <dqfext@...il.com>,
Frank Wunderlich <frank-w@...lic-files.de>,
Luiz Angelo Daros de Luca <luizluca@...il.com>,
Sander Vanheule <sander@...nheule.net>,
René van Dorst <opensource@...rst.com>,
Daniel Golle <daniel@...rotopia.org>, erkin.bozoglu@...ont.com,
Sergio Paracuellos <sergio.paracuellos@...il.com>
Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
Arınç ÜNAL <arinc.unal@...nc9.com>
Subject: [PATCH v4 3/6] dt-bindings: net: dsa: mediatek,mt7530: update examples
Update the examples on the binding.
- Add examples which include a wide variation of configurations.
- Make example comments YAML comment instead of DT binding comment.
- Add interrupt controller to the examples. Include header file for
interrupt.
- Change reset line for MT7621 examples.
- Pretty formatting for the examples.
- Change switch reg to 0.
- Change port labels to fit the example, change port 4 label to wan.
Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
---
.../bindings/net/dsa/mediatek,mt7530.yaml | 402 +++++++++++++++---
1 file changed, 347 insertions(+), 55 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 4c99266ce82a..657e162a1c01 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -210,42 +210,111 @@ allOf:
unevaluatedProperties: false
examples:
+ # Example 1: Standalone MT7530
- |
#include <dt-bindings/gpio/gpio.h>
+
mdio {
#address-cells = <1>;
#size-cells = <0>;
+
switch@0 {
compatible = "mediatek,mt7530";
reg = <0>;
+ reset-gpios = <&pio 33 0>;
+
core-supply = <&mt6323_vpa_reg>;
io-supply = <&mt6323_vemc3v3_reg>;
- reset-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
+
port@0 {
reg = <0>;
- label = "lan0";
+ label = "lan1";
};
port@1 {
reg = <1>;
- label = "lan1";
+ label = "lan2";
};
port@2 {
reg = <2>;
- label = "lan2";
+ label = "lan3";
};
port@3 {
reg = <3>;
+ label = "lan4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+ };
+ };
+
+ # Example 2: MT7530 in MT7623AI SoC
+ - |
+ #include <dt-bindings/reset/mt2701-resets.h>
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch@0 {
+ compatible = "mediatek,mt7530";
+ reg = <0>;
+
+ mediatek,mcm;
+ resets = <ðsys MT2701_ETHSYS_MCM_RST>;
+ reset-names = "mcm";
+
+ core-supply = <&mt6323_vpa_reg>;
+ io-supply = <&mt6323_vemc3v3_reg>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
label = "lan3";
};
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
port@4 {
reg = <4>;
label = "wan";
@@ -256,85 +325,219 @@ examples:
label = "cpu";
ethernet = <&gmac0>;
phy-mode = "trgmii";
+
fixed-link {
speed = <1000>;
full-duplex;
+ pause;
};
};
};
};
};
+ # Example 3: Standalone MT7531
- |
- //Example 2: MT7621: Port 4 is WAN port: 2nd GMAC -> Port 5 -> PHY port 4.
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
- ethernet {
+ mdio {
#address-cells = <1>;
#size-cells = <0>;
- gmac0: mac@0 {
- compatible = "mediatek,eth-mac";
+
+ switch@0 {
+ compatible = "mediatek,mt7531";
reg = <0>;
- phy-mode = "rgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
+ reset-gpios = <&pio 54 0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
};
};
+ };
+
+ # Example 4: MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs
+ - |
+ #include <dt-bindings/interrupt-controller/mips-gic.h>
+ #include <dt-bindings/reset/mt7621-reset.h>
- gmac1: mac@1 {
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch@0 {
+ compatible = "mediatek,mt7621";
+ reg = <0>;
+
+ mediatek,mcm;
+ resets = <&sysc MT7621_RST_MCM>;
+ reset-names = "mcm";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "trgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+ };
+ };
+
+ # Example 5: MT7621: mux MT7530's phy4 to SoC's gmac1
+ - |
+ #include <dt-bindings/interrupt-controller/mips-gic.h>
+ #include <dt-bindings/reset/mt7621-reset.h>
+
+ ethernet {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii2_pins>;
+
+ mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
- phy-mode = "rgmii-txid";
- phy-handle = <&phy4>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&example5_ethphy4>;
};
- mdio: mdio-bus {
+ mdio {
#address-cells = <1>;
#size-cells = <0>;
- /* Internal phy */
- phy4: ethernet-phy@4 {
+ /* MT7530's phy4 */
+ example5_ethphy4: ethernet-phy@4 {
reg = <4>;
};
- mt7530: switch@1f {
+ switch@0 {
compatible = "mediatek,mt7621";
- reg = <0x1f>;
- mediatek,mcm;
+ reg = <0>;
- resets = <&rstctrl 2>;
+ mediatek,mcm;
+ resets = <&sysc MT7621_RST_MCM>;
reset-names = "mcm";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
- label = "lan0";
+ label = "lan1";
};
port@1 {
reg = <1>;
- label = "lan1";
+ label = "lan2";
};
port@2 {
reg = <2>;
- label = "lan2";
+ label = "lan3";
};
port@3 {
reg = <3>;
- label = "lan3";
+ label = "lan4";
};
- /* Commented out. Port 4 is handled by 2nd GMAC.
+ /* Commented out, phy4 is muxed to gmac1.
port@4 {
reg = <4>;
- label = "lan4";
+ label = "wan";
};
*/
@@ -342,7 +545,7 @@ examples:
reg = <6>;
label = "cpu";
ethernet = <&gmac0>;
- phy-mode = "rgmii";
+ phy-mode = "trgmii";
fixed-link {
speed = <1000>;
@@ -355,82 +558,171 @@ examples:
};
};
+ # Example 6: MT7621: mux external phy to SoC's gmac1
- |
- //Example 3: MT7621: Port 5 is connected to external PHY: Port 5 -> external PHY.
+ #include <dt-bindings/interrupt-controller/mips-gic.h>
+ #include <dt-bindings/reset/mt7621-reset.h>
ethernet {
#address-cells = <1>;
#size-cells = <0>;
- gmac_0: mac@0 {
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii2_pins>;
+
+ mac@1 {
compatible = "mediatek,eth-mac";
- reg = <0>;
+ reg = <1>;
+
phy-mode = "rgmii";
+ phy-handle = <&example6_ethphy7>;
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* External PHY */
+ example6_ethphy7: ethernet-phy@7 {
+ reg = <7>;
+ phy-mode = "rgmii";
+ };
+
+ switch@0 {
+ compatible = "mediatek,mt7621";
+ reg = <0>;
+
+ mediatek,mcm;
+ resets = <&sysc MT7621_RST_MCM>;
+ reset-names = "mcm";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "trgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
};
};
+ };
- mdio0: mdio-bus {
+ # Example 7: MT7621: mux external phy to MT7530's port 5
+ - |
+ #include <dt-bindings/interrupt-controller/mips-gic.h>
+ #include <dt-bindings/reset/mt7621-reset.h>
+
+ ethernet {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii2_pins>;
+
+ mdio {
#address-cells = <1>;
#size-cells = <0>;
- /* External phy */
- ephy5: ethernet-phy@7 {
+ /* External PHY */
+ example7_ethphy7: ethernet-phy@7 {
reg = <7>;
+ phy-mode = "rgmii";
};
- switch@1f {
+ switch@0 {
compatible = "mediatek,mt7621";
- reg = <0x1f>;
- mediatek,mcm;
+ reg = <0>;
- resets = <&rstctrl 2>;
+ mediatek,mcm;
+ resets = <&sysc MT7621_RST_MCM>;
reset-names = "mcm";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
- label = "lan0";
+ label = "lan1";
};
port@1 {
reg = <1>;
- label = "lan1";
+ label = "lan2";
};
port@2 {
reg = <2>;
- label = "lan2";
+ label = "lan3";
};
port@3 {
reg = <3>;
- label = "lan3";
+ label = "lan4";
};
port@4 {
reg = <4>;
- label = "lan4";
+ label = "wan";
};
port@5 {
reg = <5>;
- label = "lan5";
- phy-mode = "rgmii";
- phy-handle = <&ephy5>;
+ label = "extphy";
+ phy-mode = "rgmii-txid";
+ phy-handle = <&example7_ethphy7>;
};
- cpu_port0: port@6 {
+ port@6 {
reg = <6>;
label = "cpu";
- ethernet = <&gmac_0>;
- phy-mode = "rgmii";
+ ethernet = <&gmac0>;
+ phy-mode = "trgmii";
fixed-link {
speed = <1000>;
--
2.34.1
Powered by blists - more mailing lists