netdev - [PATCH v3] net: dsa: mv88e6xxx: support RGMII cmode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220822144136.16627-1-marcus.carlberg@axis.com>
Date:   Mon, 22 Aug 2022 16:41:36 +0200
From:   Marcus Carlberg <marcus.carlberg@...s.com>
To:     Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Vladimir Oltean <olteanv@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>
CC:     <kernel@...s.com>, Marcus Carlberg <marcus.carlberg@...s.com>,
        Pavana Sharma <pavana.sharma@...i.com>,
        Marek Behún <kabel@...nel.org>,
        Ashkan Boldaji <ashkan.boldaji@...i.com>,
        <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v3] net: dsa: mv88e6xxx: support RGMII cmode

Since the probe defaults all interfaces to the highest speed possible
(10GBASE-X in mv88e6393x) before the phy mode configuration from the
devicetree is considered it is currently impossible to use port 0 in
RGMII mode.

This change will allow RGMII modes to be configurable for port 0
enabling port 0 to be configured as RGMII as well as serial depending
on configuration.

Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Marcus Carlberg <marcus.carlberg@...s.com>
---

Notes:
    v2: add phy mode input validation for SERDES only ports
    
    v3: add RGMII phy interface types to supported phy modes list.
        add fixes tag.

 drivers/net/dsa/mv88e6xxx/chip.c |  8 ++++++++
 drivers/net/dsa/mv88e6xxx/port.c | 19 +++++++++++++++++++
 2 files changed, 27 insertions(+)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 07e9a4da924c..6403f1f8bdbb 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -816,6 +816,14 @@ static void mv88e6393x_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
 				MAC_10000FD;
 		}
 	}
+
+	if (port == 0) {
+		__set_bit(PHY_INTERFACE_MODE_RMII, supported);
+		__set_bit(PHY_INTERFACE_MODE_RGMII, supported);
+		__set_bit(PHY_INTERFACE_MODE_RGMII_ID, supported);
+		__set_bit(PHY_INTERFACE_MODE_RGMII_RXID, supported);
+		__set_bit(PHY_INTERFACE_MODE_RGMII_TXID, supported);
+	}
 }
 
 static void mv88e6xxx_get_caps(struct dsa_switch *ds, int port,
diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c
index 90c55f23b7c9..5c4195c635b0 100644
--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c
@@ -517,6 +517,12 @@ static int mv88e6xxx_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
 	case PHY_INTERFACE_MODE_RMII:
 		cmode = MV88E6XXX_PORT_STS_CMODE_RMII;
 		break;
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		cmode = MV88E6XXX_PORT_STS_CMODE_RGMII;
+		break;
 	case PHY_INTERFACE_MODE_1000BASEX:
 		cmode = MV88E6XXX_PORT_STS_CMODE_1000BASEX;
 		break;
@@ -634,6 +640,19 @@ int mv88e6393x_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
 	if (port != 0 && port != 9 && port != 10)
 		return -EOPNOTSUPP;
 
+	if (port == 9 || port == 10) {
+		switch (mode) {
+		case PHY_INTERFACE_MODE_RMII:
+		case PHY_INTERFACE_MODE_RGMII:
+		case PHY_INTERFACE_MODE_RGMII_ID:
+		case PHY_INTERFACE_MODE_RGMII_RXID:
+		case PHY_INTERFACE_MODE_RGMII_TXID:
+			return -EINVAL;
+		default:
+			break;
+		}
+	}
+
 	/* mv88e6393x errata 4.5: EEE should be disabled on SERDES ports */
 	err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_MAC_CTL, &reg);
 	if (err)
-- 
2.20.1