| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 23 Aug 2022 09:47:37 -0600
From: Shuah Khan <skhan@...uxfoundation.org>
To: Dmitry Safonov <dima@...sta.com>,
Eric Dumazet <edumazet@...gle.com>,
"David S. Miller" <davem@...emloft.net>,
linux-kernel@...r.kernel.org
Cc: Andy Lutomirski <luto@...capital.net>,
Ard Biesheuvel <ardb@...nel.org>,
Bob Gilligan <gilligan@...sta.com>,
David Ahern <dsahern@...nel.org>,
Dmitry Safonov <0x7f454c46@...il.com>,
Eric Biggers <ebiggers@...nel.org>,
Francesco Ruggeri <fruggeri@...sta.com>,
Herbert Xu <herbert@...dor.apana.org.au>,
Hideaki YOSHIFUJI <yoshfuji@...ux-ipv6.org>,
Ivan Delalande <colona@...sta.com>,
Jakub Kicinski <kuba@...nel.org>,
Leonard Crestez <cdleonard@...il.com>,
Paolo Abeni <pabeni@...hat.com>,
Salam Noureddine <noureddine@...sta.com>,
Shuah Khan <shuah@...nel.org>, netdev@...r.kernel.org,
linux-crypto@...r.kernel.org,
Shuah Khan <skhan@...uxfoundation.org>
Subject: Re: [PATCH 25/31] selftests/net: Add TCP-AO library
On 8/18/22 10:59 AM, Dmitry Safonov wrote:
> Provide functions to create selftests dedicated to TCP-AO.
> They can run in parallel, as they use temporary net namespaces.
> They can be very specific to the feature being tested.
> This will allow to create a lot of TCP-AO tests, without complicating
> one binary with many --options and to create scenarios, that are
> hard to put in bash script that uses one binary.
>
> Signed-off-by: Dmitry Safonov <dima@...sta.com>
> ---
> tools/testing/selftests/Makefile | 1 +
> tools/testing/selftests/net/tcp_ao/.gitignore | 2 +
> tools/testing/selftests/net/tcp_ao/Makefile | 45 +++
> tools/testing/selftests/net/tcp_ao/connect.c | 81 +++++
> .../testing/selftests/net/tcp_ao/lib/aolib.h | 333 +++++++++++++++++
> .../selftests/net/tcp_ao/lib/netlink.c | 341 ++++++++++++++++++
> tools/testing/selftests/net/tcp_ao/lib/proc.c | 267 ++++++++++++++
> .../testing/selftests/net/tcp_ao/lib/setup.c | 297 +++++++++++++++
> tools/testing/selftests/net/tcp_ao/lib/sock.c | 294 +++++++++++++++
> .../testing/selftests/net/tcp_ao/lib/utils.c | 30 ++
> 10 files changed, 1691 insertions(+)
> create mode 100644 tools/testing/selftests/net/tcp_ao/.gitignore
> create mode 100644 tools/testing/selftests/net/tcp_ao/Makefile
> create mode 100644 tools/testing/selftests/net/tcp_ao/connect.c
> create mode 100644 tools/testing/selftests/net/tcp_ao/lib/aolib.h
> create mode 100644 tools/testing/selftests/net/tcp_ao/lib/netlink.c
> create mode 100644 tools/testing/selftests/net/tcp_ao/lib/proc.c
> create mode 100644 tools/testing/selftests/net/tcp_ao/lib/setup.c
> create mode 100644 tools/testing/selftests/net/tcp_ao/lib/sock.c
> create mode 100644 tools/testing/selftests/net/tcp_ao/lib/utils.c
>
> diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
> index 10b34bb03bc1..2a3b15a13ccb 100644
> --- a/tools/testing/selftests/Makefile
> +++ b/tools/testing/selftests/Makefile
> @@ -46,6 +46,7 @@ TARGETS += net
> TARGETS += net/af_unix
> TARGETS += net/forwarding
> TARGETS += net/mptcp
> +TARGETS += net/tcp_ao
Please look into a wayto invoke all of them instead of adding individual
net/* to the main Makefile. This list seems to be growing. :)
> TARGETS += netfilter
> TARGETS += nsfs
> TARGETS += pidfd
[snip]
> +
> +__attribute__((__format__(__printf__, 2, 3)))
> +static inline void __test_print(void (*fn)(const char *), const char *fmt, ...)
> +{
> +#define TEST_MSG_BUFFER_SIZE 4096
> + char buf[TEST_MSG_BUFFER_SIZE];
> + va_list arg;
> +
> + va_start(arg, fmt);
> + vsnprintf(buf, sizeof(buf), fmt, arg);
> + va_end(arg);
> + fn(buf);
> +}
> +
Is there a reason add these instead of using kselftest_* print
functions?
> +#define test_print(fmt, ...) \
> + __test_print(__test_msg, "%ld[%s:%u] " fmt "\n", \
> + syscall(SYS_gettid), \
> + __FILE__, __LINE__, ##__VA_ARGS__)
> +
> +#define test_ok(fmt, ...) \
> + __test_print(__test_ok, fmt "\n", ##__VA_ARGS__)
> +
> +#define test_fail(fmt, ...) \
> +do { \
> + if (errno) \
> + __test_print(__test_fail, fmt ": %m\n", ##__VA_ARGS__); \
> + else \
> + __test_print(__test_fail, fmt "\n", ##__VA_ARGS__); \
> + test_failed(); \
> +} while(0)
> +
> +#define KSFT_FAIL 1
> +#define test_error(fmt, ...) \
> +do { \
> + if (errno) \
> + __test_print(__test_error, "%ld[%s:%u] " fmt ": %m\n", \
> + syscall(SYS_gettid), __FILE__, __LINE__, \
> + ##__VA_ARGS__); \
> + else \
> + __test_print(__test_error, "%ld[%s:%u] " fmt "\n", \
> + syscall(SYS_gettid), __FILE__, __LINE__, \
> + ##__VA_ARGS__); \
> + exit(KSFT_FAIL); \
> +} while(0)
> +
Is there a reason add these instead of using kselftest_* print
functions?
> + * Timeout on syscalls where failure is not expected.
> + * You may want to rise it if the test machine is very busy.
> + */
> +#ifndef TEST_TIMEOUT_SEC
> +#define TEST_TIMEOUT_SEC 5
> +#endif
> +
Where is the TEST_TIMEOUT_SEC usually defined? Does this come
from shell wrapper that runs this test? Can we add a message before
starting the test print the timeout used?
> +/*
> + * Timeout on connect() where a failure is expected.
> + * If set to 0 - kernel will try to retransmit SYN number of times, set in
> + * /proc/sys/net/ipv4/tcp_syn_retries
> + * By default set to 1 to make tests pass faster on non-busy machine.
> + */
> +#ifndef TEST_RETRANSMIT_SEC
> +#define TEST_RETRANSMIT_SEC 1
> +#endif
> +
Where would this TEST_RETRANSMIT_SEC defined usually?
> +
> +static inline int _test_connect_socket(int sk, const union tcp_addr taddr,
> + unsigned port, time_t timeout)
> +{
> +#ifdef IPV6_TEST
> + struct sockaddr_in6 addr = {
> + .sin6_family = AF_INET6,
> + .sin6_port = htons(port),
> + .sin6_addr = taddr.a6,
> + };
> +#else
> + struct sockaddr_in addr = {
> + .sin_family = AF_INET,
> + .sin_port = htons(port),
> + .sin_addr = taddr.a4,
> + };
> +#endif
Why do we defined these here - are they also defined in a kernel
header?
> + return __test_connect_socket(sk, (void *)&addr, sizeof(addr), timeout);
> +}
> +
> +static inline int test_connect_socket(int sk,
> + const union tcp_addr taddr, unsigned port)
> +{
> + return _test_connect_socket(sk, taddr, port, TEST_TIMEOUT_SEC);
> +}
> +
> +extern int test_prepare_ao_sockaddr(struct tcp_ao *ao,
> + const char *alg, uint16_t flags,
> + void *addr, size_t addr_sz, uint8_t prefix,
> + uint8_t sndid, uint8_t rcvid, uint8_t maclen,
> + uint8_t keyflags, uint8_t keylen, const char *key);
> +
> +static inline int test_prepare_ao(struct tcp_ao *ao,
> + const char *alg, uint16_t flags,
> + union tcp_addr in_addr, uint8_t prefix,
> + uint8_t sndid, uint8_t rcvid, uint8_t maclen,
> + uint8_t keyflags, uint8_t keylen, const char *key)
> +{
> +#ifdef IPV6_TEST
> + struct sockaddr_in6 addr = {
> + .sin6_family = AF_INET6,
> + .sin6_port = 0,
> + .sin6_addr = in_addr.a6,
> + };
> +#else
> + struct sockaddr_in addr = {
> + .sin_family = AF_INET,
> + .sin_port = 0,
> + .sin_addr = in_addr.a4,
> + };
> +#endif
> +
Same question here. In general having these ifdefs isn't ideal without
a good reason.
> + return test_prepare_ao_sockaddr(ao, alg, flags,
> + (void *)&addr, sizeof(addr), prefix, sndid, rcvid,
> + maclen, keyflags, keylen, key);
> +}
> +
> +static inline int test_prepare_def_ao(struct tcp_ao *ao,
> + const char *key, uint16_t flags,
> + union tcp_addr in_addr, uint8_t prefix,
> + uint8_t sndid, uint8_t rcvid)
> +{
> + if (prefix > DEFAULT_TEST_PREFIX)
> + prefix = DEFAULT_TEST_PREFIX;
> +
> + return test_prepare_ao(ao, DEFAULT_TEST_ALGO, flags, in_addr,
> + prefix, sndid, rcvid, 0, 0, strlen(key), key);
> +}
> +
> +extern int test_get_one_ao(int sk, struct tcp_ao_getsockopt *out,
> + uint16_t flags, void *addr, size_t addr_sz,
> + uint8_t prefix, uint8_t sndid, uint8_t rcvid);
> +extern int test_cmp_getsockopt_setsockopt(const struct tcp_ao *a,
> + const struct tcp_ao_getsockopt *b);
> +
> +static inline int test_verify_socket_ao(int sk, struct tcp_ao *ao)
> +{
> + struct tcp_ao_getsockopt tmp;
> + int err;
> +
> + err = test_get_one_ao(sk, &tmp, 0, &ao->tcpa_addr,
> + sizeof(ao->tcpa_addr), ao->tcpa_prefix,
> + ao->tcpa_sndid, ao->tcpa_rcvid);
> + if (err)
> + return err;
Is this always an error or could this a skip if dependencies aren't
met to run the test? This is a global comment for all error cases.
> +
> + return test_cmp_getsockopt_setsockopt(ao, &tmp);
> +}
> +
> +static inline int test_set_ao(int sk, const char *key, uint16_t flags,
> + union tcp_addr in_addr, uint8_t prefix,
> + uint8_t sndid, uint8_t rcvid)
> +{
> + struct tcp_ao tmp;
> + int err;
> +
> + err = test_prepare_def_ao(&tmp, key, flags, in_addr,
> + prefix, sndid, rcvid);
> + if (err)
> + return err;
Same comment as above here.
> +
> + if (setsockopt(sk, IPPROTO_TCP, TCP_AO, &tmp, sizeof(tmp)) < 0)
> + return -errno;
> +
> + return test_verify_socket_ao(sk, &tmp);
> +}
> +
> +extern ssize_t test_server_run(int sk, ssize_t quota, time_t timeout_sec);
> +extern ssize_t test_client_loop(int sk, char *buf, size_t buf_sz,
> + const size_t msg_len, time_t timeout_sec);
> +extern int test_client_verify(int sk, const size_t msg_len, const size_t nr,
> + time_t timeout_sec);
> +
> +struct netstat;
> +extern struct netstat *netstat_read(void);
> +extern void netstat_free(struct netstat *ns);
> +extern void netstat_print_diff(struct netstat *nsa, struct netstat *nsb);
> +extern uint64_t netstat_get(struct netstat *ns,
> + const char *name, bool *not_found);
> +
> +static inline uint64_t netstat_get_one(const char *name, bool *not_found)
> +{
> + struct netstat *ns = netstat_read();
> + uint64_t ret;
> +
> + ret = netstat_get(ns, name, not_found);
> +
> + netstat_free(ns);
> + return ret;
> +}
> +
> +#endif /* _AOLIB_H_ */
> diff --git a/tools/testing/selftests/net/tcp_ao/lib/netlink.c b/tools/testing/selftests/net/tcp_ao/lib/netlink.c
> new file mode 100644
> index 000000000000..f04757c921d0
> --- /dev/null
> +++ b/tools/testing/selftests/net/tcp_ao/lib/netlink.c
> @@ -0,0 +1,341 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Original from tools/testing/selftests/net/ipsec.c */
> +#include <linux/netlink.h>
> +#include <linux/random.h>
> +#include <linux/rtnetlink.h>
> +#include <linux/veth.h>
> +#include <net/if.h>
> +#include <stdint.h>
> +#include <string.h>
> +#include <sys/socket.h>
> +
> +#include "aolib.h"
> +
> +#define MAX_PAYLOAD 2048
tools/testing/selftests/net/gro.c seem to define this as:
#define MAX_PAYLOAD (IP_MAXPACKET - sizeof(struct tcphdr) - sizeof(struct ipv6hdr))
Can you do the same instead of hard-coding?
> +
> +const struct sockaddr_in6 addr_any6 = {
> + .sin6_family = AF_INET6,
> +};
> +
> +const struct sockaddr_in addr_any4 = {
> + .sin_family = AF_INET,
> +};
>
A couple of things to look at closely. For some failures such as
memory allocation for the test or not being able to open a file
fnetstat = fopen("/proc/net/netstat", "r");
Is this a failure or missing config or not having the right permissions
to open the fail. All of these cases would be a SKIP and not a test fail.
thanks,
-- Shuah
Powered by blists - more mailing lists