lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YwULgfZBDBhnn+Aa@lunn.ch>
Date:   Tue, 23 Aug 2022 19:16:49 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     Hau <hau@...ltek.com>
Cc:     "hkallweit1@...il.com" <hkallweit1@...il.com>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        nic_swsd <nic_swsd@...ltek.com>,
        "kuba@...nel.org" <kuba@...nel.org>,
        "davem@...emloft.net" <davem@...emloft.net>
Subject: Re: [PATCH v3 net-next] r8169: add support for rtl8168h(revid 0x2a)
 + rtl8211fs fiber application

On Tue, Aug 23, 2022 at 03:48:13PM +0000, Hau wrote:
> > > > > @@ -914,8 +952,12 @@ static void r8168g_mdio_write(struct
> > > > rtl8169_private *tp, int reg, int value)
> > > > >  	if (tp->ocp_base != OCP_STD_PHY_BASE)
> > > > >  		reg -= 0x10;
> > > > >
> > > > > -	if (tp->ocp_base == OCP_STD_PHY_BASE && reg == MII_BMCR)
> > > > > +	if (tp->ocp_base == OCP_STD_PHY_BASE && reg == MII_BMCR) {
> > > > > +		if (tp->sfp_if_type != RTL_SFP_IF_NONE && value &
> > > > BMCR_PDOWN)
> > > > > +			return;
> > > > > +
> > > >
> > > > Please could you explain this change.
> > > H/W has issue. If we power down phy, then H/W will become abnormal.
> > 
> > Does the MAC break, or the PHY? If the PHY is the problem, the work around
> > should be in the PHY driver, not the MAC driver.
> >
> It is a workaround. We did not get the root cause yet.

O.K, since you are modifying a PHY register, lets assume it is a PHY
issue. Please put the workaround in the PHY driver.

> > > I have tried to use alloc_mdio_bitbang(). But I will get error message "
> > rmmod: ERROR: Module r8169 is in use " when I try to unload r8169.
> > > After debug, I found it is cause by "__module_get(ctrl->ops->owner); " in
> > alloc_mdio_bitbang().
> > 
> > void free_mdio_bitbang(struct mii_bus *bus) {
> >         struct mdiobb_ctrl *ctrl = bus->priv;
> > 
> >         module_put(ctrl->ops->owner);
> >         mdiobus_free(bus);
> > }
> > 
> > Make sure your cleanup is symmetrical to your setup.
> > 
> I have tried to call free_mdio_bitbang() in rtl_remove_one (). But when I try to unload r8169, rtl_remove_one() did not get called.

So you probably need to dig into driver/base/dd.c and maybe the
drivers/pci, to understand why.

	Andrew

Powered by blists - more mailing lists