netdev - Re: [PATCH 2/2] net: ethernet: stmicro: stmmac: dwmac-rk: Add rv1126 support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <YxCgtyqZ6+D5MBY5@lunn.ch>
Date:   Thu, 1 Sep 2022 14:08:23 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     Anand Moon <anand@...eble.ai>
Cc:     Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>,
        Jose Abreu <joabreu@...opsys.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Sugar Zhang <sugar.zhang@...k-chips.com>,
        David Wu <david.wu@...k-chips.com>,
        Jagan Teki <jagan@...eble.ai>, netdev@...r.kernel.org,
        linux-stm32@...md-mailman.stormreply.com,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] net: ethernet: stmicro: stmmac: dwmac-rk: Add rv1126
 support

> > On Mon, Aug 29, 2022 at 06:50:42AM +0000, Anand Moon wrote:
> > > Rockchip RV1126 has GMAC 10/100/1000M ethernet controller
> > > via RGMII and RMII interfaces are configured via M0 and M1 pinmux.
> > >
> > > This patch adds rv1126 support by adding delay lines of M0 and M1
> > > simultaneously.
> >
> > What does 'delay lines' mean with respect to RGMII?
> >
> > The RGMII signals need a 2ns delay between the clock and the data
> > lines. There are three places this can happen:
> >
> > 1) In the PHY
> > 2) Extra long lines on the PCB
> > 3) In the MAC
> >
> > Generally, 1) is used, and controlled via phy-mode. A value of
> > PHY_INTERFACE_MODE_RGMII_ID passed to the PHY driver means it will add
> > these delays.
> >
> > You don't want both the MAC and the PHY adding delays.
> >
> These are set to enable MAC transmit clock delay set for Tx and Rx for
> iomux group.

Which does not answer my question. Is this the same as, or different
to, the 2ns delay required by RGMII?

    Andrew