netdev - [PATCH net v1 1/1] net: dsa: microchip: fix kernel oops on ksz8 switches

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220902092737.2576142-1-o.rempel@pengutronix.de>
Date:   Fri,  2 Sep 2022 11:27:37 +0200
From:   Oleksij Rempel <o.rempel@...gutronix.de>
To:     Woojung Huh <woojung.huh@...rochip.com>,
        UNGLinuxDriver@...rochip.com, Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Vladimir Oltean <olteanv@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>
Cc:     Oleksij Rempel <o.rempel@...gutronix.de>, kernel@...gutronix.de,
        linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
        Arun.Ramadoss@...rochip.com
Subject: [PATCH net v1 1/1] net: dsa: microchip: fix kernel oops on ksz8 switches

After driver refactoring we was running ksz9477 specific CPU port
configuration on ksz8 family which ended with kernel oops. So, make sure
we run this code only on ksz9477 compatible devices.

Tested on KSZ8873 and KSZ9477.

Fixes: da8cd08520f3 ("net: dsa: microchip: add support for common phylink mac link up")
Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
---
 drivers/net/dsa/microchip/ksz_common.c | 30 ++++++++++++++++++++------
 1 file changed, 24 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 6bd69a7e6809d..872aba63e7d43 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -170,6 +170,13 @@ static const struct ksz_dev_ops ksz8_dev_ops = {
 	.exit = ksz8_switch_exit,
 };
 
+static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port,
+					unsigned int mode,
+					phy_interface_t interface,
+					struct phy_device *phydev, int speed,
+					int duplex, bool tx_pause,
+					bool rx_pause);
+
 static const struct ksz_dev_ops ksz9477_dev_ops = {
 	.setup = ksz9477_setup,
 	.get_port_addr = ksz9477_get_port_addr,
@@ -196,6 +203,7 @@ static const struct ksz_dev_ops ksz9477_dev_ops = {
 	.mdb_del = ksz9477_mdb_del,
 	.change_mtu = ksz9477_change_mtu,
 	.max_mtu = ksz9477_max_mtu,
+	.phylink_mac_link_up = ksz9477_phylink_mac_link_up,
 	.config_cpu_port = ksz9477_config_cpu_port,
 	.enable_stp_addr = ksz9477_enable_stp_addr,
 	.reset = ksz9477_reset_switch,
@@ -230,6 +238,7 @@ static const struct ksz_dev_ops lan937x_dev_ops = {
 	.mdb_del = ksz9477_mdb_del,
 	.change_mtu = lan937x_change_mtu,
 	.max_mtu = ksz9477_max_mtu,
+	.phylink_mac_link_up = ksz9477_phylink_mac_link_up,
 	.config_cpu_port = lan937x_config_cpu_port,
 	.enable_stp_addr = ksz9477_enable_stp_addr,
 	.reset = lan937x_reset_switch,
@@ -1656,13 +1665,13 @@ static void ksz_duplex_flowctrl(struct ksz_device *dev, int port, int duplex,
 	ksz_prmw8(dev, port, regs[P_XMII_CTRL_0], mask, val);
 }
 
-static void ksz_phylink_mac_link_up(struct dsa_switch *ds, int port,
-				    unsigned int mode,
-				    phy_interface_t interface,
-				    struct phy_device *phydev, int speed,
-				    int duplex, bool tx_pause, bool rx_pause)
+static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port,
+					unsigned int mode,
+					phy_interface_t interface,
+					struct phy_device *phydev, int speed,
+					int duplex, bool tx_pause,
+					bool rx_pause)
 {
-	struct ksz_device *dev = ds->priv;
 	struct ksz_port *p;
 
 	p = &dev->ports[port];
@@ -1676,6 +1685,15 @@ static void ksz_phylink_mac_link_up(struct dsa_switch *ds, int port,
 	ksz_port_set_xmii_speed(dev, port, speed);
 
 	ksz_duplex_flowctrl(dev, port, duplex, tx_pause, rx_pause);
+}
+
+static void ksz_phylink_mac_link_up(struct dsa_switch *ds, int port,
+				    unsigned int mode,
+				    phy_interface_t interface,
+				    struct phy_device *phydev, int speed,
+				    int duplex, bool tx_pause, bool rx_pause)
+{
+	struct ksz_device *dev = ds->priv;
 
 	if (dev->dev_ops->phylink_mac_link_up)
 		dev->dev_ops->phylink_mac_link_up(dev, port, mode, interface,
-- 
2.30.2